<html> <head> <base href="https://bugs.freedesktop.org/" /> </head> <body> <div> <a class="bz_bug_link bz_status_NEW " title="NEW - [N56VZ, Realtek ALC663, Black Headphone Out, Right] No sound from Subwoofer in 2.1 mode" href="https://bugs.freedesktop.org/show_bug.cgi?id=91568#c12">Comment # 12</a> on <a class="bz_bug_link bz_status_NEW " title="NEW - [N56VZ, Realtek ALC663, Black Headphone Out, Right] No sound from Subwoofer in 2.1 mode" href="https://bugs.freedesktop.org/show_bug.cgi?id=91568">bug 91568</a> from <a class="email" href="mailto:jason.braddock.69@gmail.com" title="jason.braddock.69@gmail.com">jason.braddock.69@gmail.com</a> <pre>(In reply to jason.braddock.69 from <a href="show_bug.cgi?id=91568#c11">comment #11</a>) > (In reply to Raymond from <a href="show_bug.cgi?id=91568#c7">comment #7</a>) > > <a href="http://git.alsa-project.org/?p=alsa-tools.git;a=tree">http://git.alsa-project.org/?p=alsa-tools.git;a=tree</a> > > > > > > you need hdajacksensetest which use parser code in hdajackretask > > WITHOUT subwoofer: > sudo ./hdajacksensetest -a > Pin 0x11 (Not connected): present = No > Pin 0x12 (Not connected): present = No > Pin 0x13 (Not connected): present = No > Pin 0x14 (Internal Speaker, ATAPI): present = No > Pin 0x15 (Not connected): present = No > Pin 0x16 (Internal Speaker, ATAPI): present = No > Pin 0x17 (Not connected): present = No > Pin 0x18 (Pink Mic, Rear side): present = No > Pin 0x19 (Internal Mic, ATAPI): present = No > Pin 0x1a (Not connected): present = No > Pin 0x1b (Not connected): present = No > Pin 0x1d (Not connected): present = No > Pin 0x1e (Black SPDIF Out, Right side): present = No > Pin 0x21 (Green Headphone, Rear side): present = No > > > > WITH subwoofer: > sudo ./hdajacksensetest -a > Pin 0x11 (Not connected): present = No > Pin 0x12 (Not connected): present = No > Pin 0x13 (Not connected): present = No > Pin 0x14 (Internal Speaker, ATAPI): present = No > Pin 0x15 (Not connected): present = No > Pin 0x16 (Internal Speaker, ATAPI): present = No > Pin 0x17 (Not connected): present = No > Pin 0x18 (Pink Mic, Rear side): present = No > Pin 0x19 (Internal Mic, ATAPI): present = No > Pin 0x1a (Not connected): present = No > Pin 0x1b (Not connected): present = No > Pin 0x1d (Not connected): present = No > Pin 0x1e (Black SPDIF Out, Right side): present = Yes > Pin 0x21 (Green Headphone, Rear side): present = No Just to give more precision (not sure if it helps): - There is an SPDIF output on the right side of the board. It is combined with the standard analogic stereo 3.5jack (same physical port). I have no SPDIF capable hardware to test the output. - The subwoofer physical port is located on left side of the board and is a smaller jack (probably a 2.5 jack), with 4 connectors on it... this number is quite weird so maybe the sobwoofer does itself the mix+lowpass? I'll try to open it and see. In the end, the pin list is messing with SPDIF output and subwoofer while those two outputs are physically distinct...</pre> </div> <hr> You are receiving this mail because: <ul> <li>You are the QA Contact for the bug.</li> <li>You are the assignee for the bug.</li> </ul> </body> </html>