February 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Mon Feb 1 08:46:49 UTC 2016
Ending: Mon Feb 29 18:07:40 UTC 2016
Messages: 294

• [pulseaudio-discuss] [RESEND] [PATCH v3 1/2] bluetooth: Add support for automatic switch between hsp and a2dp profiles   Pali Rohár
• [pulseaudio-discuss] Bluetooth : A2DP and AVRCP is working fine , but HFP is showing working but No sound -Mic/Speaker ?   Samiran Sarkar
• [pulseaudio-discuss] Bluetooth : A2DP and AVRCP is working fine , but HFP is showing working but No sound -Mic/Speaker ?   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 11/24] echo-cancel: Start capture at a sane value if we're doing webrtc AGC   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 6/6] pactl, pacmd, cli-command: Added set-(sink|source)-latency-offset commands.   Chris Billington
• [pulseaudio-discuss] [PATCH v3 05/24] echo-cancel: Canceller may use different spec for playback and capture   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 07/24] echo-cancel: Add a modarg to use sink/source master format and spec   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 11/24] echo-cancel: Start capture at a sane value if we're doing webrtc AGC   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 09/24] echo-cancel: Allow enabling tracing output from the webrtc canceller   Arun Raghavan
• [pulseaudio-discuss] [PATCH] echo-cancel: Allow enabling tracing output from the webrtc canceller   arun at accosted.net
• [pulseaudio-discuss] [RESEND] [PATCH v3 1/2] bluetooth: Add support for automatic switch between hsp and a2dp profiles   Arun Raghavan
• [pulseaudio-discuss] [RESEND] [PATCH v3 1/2] bluetooth: Add support for automatic switch between hsp and a2dp profiles   Pali Rohár
• [pulseaudio-discuss] [RESEND] [PATCH v3 1/2] bluetooth: Add support for automatic switch between hsp and a2dp profiles   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 05/24] echo-cancel: Canceller may use different spec for playback and capture   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 07/24] echo-cancel: Add a modarg to use sink/source master format and spec   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 11/24] echo-cancel: Start capture at a sane value if we're doing webrtc AGC   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 12/24] echo-cancel: Allow enabling of the webrtc experimental AGC mechanism   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 05/24] echo-cancel: Canceller may use different spec for playback and capture   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 11/24] echo-cancel: Start capture at a sane value if we're doing webrtc AGC   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 12/24] echo-cancel: Allow enabling of the webrtc experimental AGC mechanism   Arun Raghavan
• [pulseaudio-discuss] ofono - problem/ bug in the ALSA driver ?- Pulseaudio is not working --   Samiran Sarkar
• [pulseaudio-discuss] HFP Profile not working in PulseAudio 6   Abhishek Gupta
• [pulseaudio-discuss] [PATCH v3 13/24] echo-cancel: Add a modarg toggle for VAD in the webrtc canceller   Tanu Kaskinen
• [pulseaudio-discuss] Way to treat (almost) equal sound-devices different?   Stefan Neufeind
• [pulseaudio-discuss] Way to treat (almost) equal sound-devices different?   Tanu Kaskinen
• [pulseaudio-discuss] Problem with switch-on-connect   Nikolay Amiantov
• [pulseaudio-discuss] Problem with switch-on-connect   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Arun Raghavan
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   David Henningsson
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   Alexander E. Patrakov
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   David Henningsson
• [pulseaudio-discuss] Problem with switch-on-connect   Nikolay Amiantov
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Tanu Kaskinen
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 14/24] build-sys: Move to compiling with C11 support   Arun Raghavan
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   David Henningsson
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   David Henningsson
• [pulseaudio-discuss] RFC: Switch to HDMI or not?   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 15/24] echo-cancel: Use anonymous unions for echo canceller params   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 16/24] echo-cancel: Make webrtc AGC start volume a modarg   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] default.pa: remove X11 module examples   Tanu Kaskinen
• [pulseaudio-discuss] Pulseaudio 8/Bluez5 fails to load module-bluez5-device when running in system-wide mode   Vlad Nikolyukin
• [pulseaudio-discuss] Pulseaudio 8/Bluez5 fails to load module-bluez5-device when running in system-wide mode   Tanu Kaskinen
• [pulseaudio-discuss] Pulseaudio 8/Bluez5 fails to load module-bluez5-device when running in system-wide mode   Vlad Nikolyukin
• [pulseaudio-discuss] [PATCH v3 17/24] echo-cancel: Fix webrtc canceller when rec channels != play channels   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 17/24] echo-cancel: Fix webrtc canceller when rec channels != play channels   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 17/24] echo-cancel: Fix webrtc canceller when rec channels != play channels   Arun Raghavan
• [pulseaudio-discuss] hard channel mapping issue   Dennis Heuer
• [pulseaudio-discuss] Can't subscribe? | PulseAudio sink/loopback question   J Copse
• [pulseaudio-discuss] [PATCH 4/5] rtpoll: Implement pa_mainloop_api support   Arun Raghavan
• [pulseaudio-discuss] [PATCH 5/5] tunnel-new: Replace pa_mainloop with pa_rtpoll   Arun Raghavan
• [pulseaudio-discuss] [PATCH 4/5] rtpoll: Implement pa_mainloop_api support   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] default.pa: remove X11 module examples   Arun Raghavan
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Arun Raghavan
• [pulseaudio-discuss] [PATCH v6 04/37] raop: Add pulsecore/core-utils a pa_str_in_list function   Arun Raghavan
• [pulseaudio-discuss] [PATCH v6 05/37] raop: Parse server capabilities on discovery   Arun Raghavan
• [pulseaudio-discuss] [PATCH v6 09/37] raop: Add UDP protocol handling   Arun Raghavan
• [pulseaudio-discuss] [PATCH v6 16/37] raop: Add the core implementation of RAOP authentication   Arun Raghavan
• [pulseaudio-discuss] hard channel mapping issue   Raymond Yau
• [pulseaudio-discuss] [PATCH v3 18/24] echo-cancel: Improve webrtc canceller error handling a bit   Tanu Kaskinen
• [pulseaudio-discuss] hard channel mapping issue   Dennis Heuer
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Hajime Fujita
• [pulseaudio-discuss] [PATCH v6 04/37] raop: Add pulsecore/core-utils a pa_str_in_list function   Hajime Fujita
• [pulseaudio-discuss] [PATCH v6 04/37] raop: Add pulsecore/core-utils a pa_str_in_list function   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 18/24] echo-cancel: Improve webrtc canceller error handling a bit   Arun Raghavan
• [pulseaudio-discuss] [PATCH v6 05/37] raop: Parse server capabilities on discovery   Hajime Fujita
• [pulseaudio-discuss] [PATCH v6 09/37] raop: Add UDP protocol handling   Hajime Fujita
• [pulseaudio-discuss] [PATCH v6 16/37] raop: Add the core implementation of RAOP authentication   Hajime Fujita
• [pulseaudio-discuss] Rerouting an automatically created loopback?   Stefan Neufeind
• [pulseaudio-discuss] [PATCH 2/3] coreaudio: Dynamically allocate C string when converting from CFString   Mihai Moldovan
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Hajime Fujita
• [pulseaudio-discuss] [PATCH 3/3] coreaudio: Catch devices with more channels than we support   Mihai Moldovan
• [pulseaudio-discuss] [PATCH] default.pa.in: do not load module-console-kit and module-systemd-login if HAVE_COREAUDIO. It fails.   Mihai Moldovan
• [pulseaudio-discuss] [PATCH] default.pa.in: do not load module-console-kit and module-systemd-login if HAVE_COREAUDIO. It fails.   Mihai Moldovan
• [pulseaudio-discuss] [PATCH] module-coreaudio-{device, detect}: implement record and playback modargs, curtesy of module-waveout.   Mihai Moldovan
• [pulseaudio-discuss] [PATCH v2] module-coreaudio-{device, detect}: implement record and playback modargs, curtesy of module-waveout.   Mihai Moldovan
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 18/24] echo-cancel: Improve webrtc canceller error handling a bit   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 19/24] echo-cancel: webrtc canceller supports different in/out channel counts   Tanu Kaskinen
• [pulseaudio-discuss] Rerouting an automatically created loopback?   Tanu Kaskinen
• [pulseaudio-discuss] Rerouting an automatically created loopback?   Stefan Neufeind
• [pulseaudio-discuss] Can't subscribe? | PulseAudio sink/loopback question   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] role-ducking: Fix improper unducking behavior in case of operating globally   Sangchul Lee
• [pulseaudio-discuss] [PATCH v3 01/24] echo-cancel: Update webrtc-audio-processing usage to new API   Mihai Moldovan
• [pulseaudio-discuss] [PATCH v2 00/12] Introduce memfd support   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 01/12] pulsecore: Cache daemon shm size inside pa_core   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 03/12] pulsecore: Transform pa_mempool_new() into a factory method   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 04/12] pulsecore: Split pa_shm mempool backend into pa_shm and pa_privatemem   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 05/12] pulsecore: SHM: Introduce memfd support   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 07/12] pulsecore, tests: Use new memexport/memimport API   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 08/12] pulsecore: Specially mark global mempools   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 09/12] pulsecore: pstream: Support memfd blocks transport   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 10/12] srbchannel: Use memfd transport by default; pump protocol version   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 11/12] pulse: client audio: Use memfd transport by default   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 12/12] core: Use memfd transport by default   Ahmed S. Darwish
• [pulseaudio-discuss] Vacuuming per-client mempools (was: [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files)   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Hajime Fujita
• [pulseaudio-discuss] [PATCH v2 00/12] Introduce memfd support   David Henningsson
• [pulseaudio-discuss] Vacuuming per-client mempools (was: [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files)   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 01/12] pulsecore: Cache daemon shm size inside pa_core   David Henningsson
• [pulseaudio-discuss] [PATCH v2 11/12] pulse: client audio: Use memfd transport by default   David Henningsson
• [pulseaudio-discuss] [PATCH 1/3] build-sys: Drop sysroot from OS X CFLAGS   Mihai Moldovan
• [pulseaudio-discuss] [PATCH 3/3] coreaudio: Catch devices with more channels than we support   Arun Raghavan
• [pulseaudio-discuss] [PATCH] default.pa.in: do not load module-console-kit and module-systemd-login if HAVE_COREAUDIO. It fails.   Arun Raghavan
• [pulseaudio-discuss] [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files   David Henningsson
• [pulseaudio-discuss] [PATCH v2 03/12] pulsecore: Transform pa_mempool_new() into a factory method   David Henningsson
• [pulseaudio-discuss] [PATCH v2 04/12] pulsecore: Split pa_shm mempool backend into pa_shm and pa_privatemem   David Henningsson
• [pulseaudio-discuss] [PATCH v2 00/12] Introduce memfd support   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 05/12] pulsecore: SHM: Introduce memfd support   David Henningsson
• [pulseaudio-discuss] [PATCH v2 03/12] pulsecore: Transform pa_mempool_new() into a factory method   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 00/12] Introduce memfd support   David Henningsson
• [pulseaudio-discuss] Vacuuming per-client mempools (was: [PATCH v2 02/12] pulsecore: srbchannel: Introduce per-client SHM files)   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 05/12] pulsecore: SHM: Introduce memfd support   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 00/12] Introduce memfd support   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v3 01/24] echo-cancel: Update webrtc-audio-processing usage to new API   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 11/12] pulse: client audio: Use memfd transport by default   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 04/12] pulsecore: Split pa_shm mempool backend into pa_shm and pa_privatemem   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 04/12] pulsecore: Split pa_shm mempool backend into pa_shm and pa_privatemem   Ahmed S. Darwish
• [pulseaudio-discuss] hard channel mapping issue   Dennis Heuer
• [pulseaudio-discuss] : [pulseaudio] main.c: Sink alsa-output.usb / : [pulseaudio] main.c: Source alsa_input.usb analog-stereo does not exist.   Samiran Sarkar
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 20/24] echo-cancel: Add beamforming support in the webrtc canceller   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] modules: Fix compiler warning comparing 0 with bool   Peter Meerwald
• [pulseaudio-discuss] [PATCH 2/2] core: Fix GCC 6 compiler warning regarding left shift of negative value   Peter Meerwald
• [pulseaudio-discuss] [PATCH v3 22/24] echo-cancel: Use webrtc's deinterleaved API   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/2] modules: Fix compiler warning comparing 0 with bool   David Henningsson
• [pulseaudio-discuss] [PATCH v2 03/12] pulsecore: Transform pa_mempool_new() into a factory method   David Henningsson
• [pulseaudio-discuss] [PATCH v2 05/12] pulsecore: SHM: Introduce memfd support   David Henningsson
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   David Henningsson
• [pulseaudio-discuss] [PATCH v2 07/12] pulsecore, tests: Use new memexport/memimport API   David Henningsson
• [pulseaudio-discuss] [PATCH v2 08/12] pulsecore: Specially mark global mempools   David Henningsson
• [pulseaudio-discuss] [PATCH v2 09/12] pulsecore: pstream: Support memfd blocks transport   David Henningsson
• [pulseaudio-discuss] [PATCH 0/3] Keep audio routed to HDMI after the display has woken up from sleep   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/3] switch-on-port-available: unify input/output switching policy   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 2/3] switch-on-port-available: fix inverted if condition   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 3/3] switch-on-port-available: prefer ports that have been selected by the user   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v2 05/12] pulsecore: SHM: Introduce memfd support   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 08/12] pulsecore: Specially mark global mempools   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 11/12] pulse: client audio: Use memfd transport by default   Ahmed S. Darwish
• [pulseaudio-discuss] [pulseaudio] backend-ofono.c :Deferred setup failed on fd -1: Transport endpoint is not connected   Samiran Sarkar
• [pulseaudio-discuss] [PATCH v3 23/24] echo-cancel: Update a copyright notice   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 18/24] echo-cancel: Improve webrtc canceller error handling a bit   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 18/24] echo-cancel: Improve webrtc canceller error handling a bit   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 18/24] echo-cancel: Improve webrtc canceller error handling a bit   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 22/24] echo-cancel: Use webrtc's deinterleaved API   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 22/24] echo-cancel: Use webrtc's deinterleaved API   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 20/24] echo-cancel: Add beamforming support in the webrtc canceller   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 22/24] echo-cancel: Use webrtc's deinterleaved API   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 22/24] echo-cancel: Use webrtc's deinterleaved API   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 20/24] echo-cancel: Add beamforming support in the webrtc canceller   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v3 20/24] echo-cancel: Add beamforming support in the webrtc canceller   Arun Raghavan
• [pulseaudio-discuss] [PATCH v3 01/24] echo-cancel: Update webrtc-audio-processing usage to new API   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 00/23] webrtc echo canceller update   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 01/23] echo-cancel: Update webrtc-audio-processing usage to new API   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 02/23] echo-cancel: Allow enabling the extended filter in webrtc AEC   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 04/23] echo-cancel: Canceller may use different spec for playback and capture   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 05/23] echo-cancel: Relax restrictions on webrtc AEC stream config   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 06/23] echo-cancel: Add a modarg to use sink/source master format and spec   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 07/23] echo-cancel: Mark private function as static   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 08/23] echo-cancel: Allow enabling tracing output from the webrtc canceller   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 09/23] echo-cancel: Deal with volume limit breakage in webrtc AGC   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 10/23] echo-cancel: Start capture at a sane volume if we're doing webrtc AGC   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 11/23] echo-cancel: Allow enabling of the webrtc experimental AGC mechanism   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 12/23] echo-cancel: Add a modarg toggle for VAD in the webrtc canceller   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 13/23] build-sys: Move to compiling with C11 support   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 14/23] echo-cancel: Use anonymous unions for echo canceller params   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 15/23] echo-cancel: Make webrtc AGC start volume a modarg   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 16/23] echo-cancel: Fix webrtc canceller when rec channels != play channels   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 17/23] echo-cancel: Improve webrtc canceller error handling a bit   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 18/23] echo-cancel: webrtc canceller supports different in/out channel counts   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 19/23] echo-cancel: Mark webrtc intelligbility enhancer as non-functional   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 20/23] echo-cancel: Use webrtc's deinterleaved API   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 21/23] echo-cancel: Update a copyright notice   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 22/23] echo-cancel: Remove pa_ prefix on private functions   arun at accosted.net
• [pulseaudio-discuss] [PATCH v4 23/23] echo-cancel: Add beamforming support in the webrtc canceller   arun at accosted.net
• [pulseaudio-discuss] [PATCH] role-cork: Use the PA_IDXSET_FOREACH macro   이정섭
• [pulseaudio-discuss] ASoC and pulseaudio   Carlo Caione
• [pulseaudio-discuss] ASoC and pulseaudio   Arun Raghavan
• [pulseaudio-discuss] [PATCH] role-cork: Use the PA_IDXSET_FOREACH macro   Arun Raghavan
• [pulseaudio-discuss] [PATCH 2/2] core: Fix GCC 6 compiler warning regarding left shift of negative value   Arun Raghavan
• [pulseaudio-discuss] [PATCH 0/1] alsa: Make profiles' availability dynamic   Bob Ham
• [pulseaudio-discuss] [PATCH 1/1] alsa: Make profiles' availability dynamic   Bob Ham
• [pulseaudio-discuss] ASoC and pulseaudio   Tanu Kaskinen
• [pulseaudio-discuss] ASoC and pulseaudio   Arun Raghavan
• [pulseaudio-discuss] [PATCH] role-ducking: Fix improper unducking behavior in case of operating globally   Arun Raghavan
• [pulseaudio-discuss] ASoC and pulseaudio   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] role-cork: Fix improper uncork behavior in case of operating globally   Sangchul Lee
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] role-ducking: Fix improper unducking behavior in case of operating globally   Georg Chini
• [pulseaudio-discuss] [PATCH 0/1] alsa: Make profiles' availability dynamic   Raymond Yau
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Arun Raghavan
• [pulseaudio-discuss] [PATCH] alsa-mixer: sb-omni-surround-5.1.conf: remove analog-surround-21, add Linux 4.3+ support   Nazar Mokrynskyi
• [pulseaudio-discuss] [PATCH 0/1] alsa: Make profiles' availability dynamic   Bob Ham
• [pulseaudio-discuss] [pulseaudio] alsa-util.c: Error opening PCM device hdmi   Samiran Sarkar
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Nazar Mokrynskyi
• [pulseaudio-discuss] [PATCH] role-ducking: Add support for ducking group   Sangchul Lee
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Tanu Kaskinen
• [pulseaudio-discuss] [pulseaudio] alsa-util.c: Error opening PCM device hdmi   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 00/23] webrtc echo canceller update   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   David Henningsson
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 09/12] pulsecore: pstream: Support memfd blocks transport   Ahmed S. Darwish
• [pulseaudio-discuss] module role-ducking and module-role-cork   Georg Chini
• [pulseaudio-discuss] [PATCH v4 17/23] echo-cancel: Improve webrtc canceller error handling a bit   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 05/23] echo-cancel: Relax restrictions on webrtc AEC stream config   Tanu Kaskinen
• [pulseaudio-discuss] ASoC and pulseaudio   Pierre-Louis Bossart
• [pulseaudio-discuss] [PATCH v6 00/37] raop2 support for module-raop-sink   Hajime Fujita
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 05/23] echo-cancel: Relax restrictions on webrtc AEC stream config   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 17/23] echo-cancel: Improve webrtc canceller error handling a bit   Arun Raghavan
• [pulseaudio-discuss] [PATCH] role-ducking: Fix improper unducking behavior in case of operating globally   Arun Raghavan
• [pulseaudio-discuss] ASoC and pulseaudio   Carlo Caione
• [pulseaudio-discuss] [PATCH] role-cork: Use the PA_IDXSET_FOREACH macro   Jungsup Lee
• [pulseaudio-discuss] [PATCH] role-ducking: Fix improper unducking behavior in case of operating globally   Georg Chini
• [pulseaudio-discuss] pulseaudio[8858]: I: [alsa-sink-USB Audio] module-loopback.c: Could not peek into queue   Samiran Sarkar
• [pulseaudio-discuss] Design constraints for per-client mempools   Ahmed S. Danish
• [pulseaudio-discuss] Design constraints for per-client mempools   Tanu Kaskinen
• [pulseaudio-discuss] Design constraints for per-client mempools   Tanu Kaskinen
• [pulseaudio-discuss] Design constraints for per-client mempools   David Henningsson
• [pulseaudio-discuss] ASoC and pulseaudio   Liam Girdwood
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   David Henningsson
• [pulseaudio-discuss] [PATCH v2 09/12] pulsecore: pstream: Support memfd blocks transport   David Henningsson
• [pulseaudio-discuss] pulse audio on CentOS 7   Jerry Geis
• [pulseaudio-discuss] [PATCH v2 06/12] pulsecore: memexport/memimport: Support memfd blocks   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v2 09/12] pulsecore: pstream: Support memfd blocks transport   Ahmed S. Darwish
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Ian Pilcher
• [pulseaudio-discuss] [PATCH v4 05/23] echo-cancel: Relax restrictions on webrtc AEC stream config   Tanu Kaskinen
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 20/23] echo-cancel: Use webrtc's deinterleaved API   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 23/23] echo-cancel: Add beamforming support in the webrtc canceller   Tanu Kaskinen
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Ian Pilcher
• [pulseaudio-discuss] [PATCH v2 09/12] pulsecore: pstream: Support memfd blocks transport   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH v4 03/23] echo-cancel: Add support for the webrtc intelligibility enhancer   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 05/23] echo-cancel: Relax restrictions on webrtc AEC stream config   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 23/23] echo-cancel: Add beamforming support in the webrtc canceller   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 20/23] echo-cancel: Use webrtc's deinterleaved API   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 00/23] webrtc echo canceller update   Arun Raghavan
• [pulseaudio-discuss] [PATCH v4 20/23] echo-cancel: Use webrtc's deinterleaved API   Tanu Kaskinen
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] echo-cancel: Convert AGC API to deal with pa_volume_t   arun at accosted.net
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Tanu Kaskinen
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Nazar Mokrynskyi
• [pulseaudio-discuss] [PATCH] echo-cancel: Convert AGC API to deal with pa_volume_t   Tanu Kaskinen
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] echo-cancel: Convert AGC API to deal with pa_volume_t   Arun Raghavan
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Ian Pilcher
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Rex Dieter
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Nazar Mokrynskyi
• [pulseaudio-discuss] Prevent Bluejeans from changing mic gain   Arun Raghavan
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Tanu Kaskinen
• [pulseaudio-discuss] Design question: how to store the "preferred ports" of a card   Tanu Kaskinen
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Nazar Mokrynskyi
• [pulseaudio-discuss] Design question: how to store the "preferred ports" of a card   David Henningsson
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Tanu Kaskinen
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Nazar Mokrynskyi
• [pulseaudio-discuss] Design question: how to store the "preferred ports" of a card   Tanu Kaskinen
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Tanu Kaskinen
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Nazar Mokrynskyi
• [pulseaudio-discuss] SB Omni surround 5.1 microphone with speaker PulseAudio 8.0 not working simultaneously   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH v4 00/23] webrtc echo canceller update   Ahmed S. Darwish
• [pulseaudio-discuss] [PATCH] rtp: Do all receive side rate calculations in sink-input domain   arun at accosted.net
• [pulseaudio-discuss] [PATCH 0/8] Add GStreamer-based RTP support   arun at accosted.net
• [pulseaudio-discuss] [PATCH 1/8] rtp; Make init return a boolean value for success/failure   arun at accosted.net
• [pulseaudio-discuss] [PATCH 2/8] rtp: Don't use cookie for SSRC   arun at accosted.net
• [pulseaudio-discuss] [PATCH 3/8] rtp: Drop support for non-L16 media   arun at accosted.net
• [pulseaudio-discuss] [PATCH 4/8] rtp: Move MTU handling to the RTP implementation   arun at accosted.net
• [pulseaudio-discuss] [PATCH 5/8] rtp: Hide RTP implementation details from module-rtp-*   arun at accosted.net
• [pulseaudio-discuss] [PATCH 6/8] rtp: Don't release memblock until we stop accessing underlying data   arun at accosted.net
• [pulseaudio-discuss] [PATCH 7/8] rtpoll: Separate out before/after/work callback userdata   arun at accosted.net
• [pulseaudio-discuss] [PATCH 8/8] rtp: Add a GStreamer-based RTP implementation   arun at accosted.net
• [pulseaudio-discuss] [PATCH 8/8] rtp: Add a GStreamer-based RTP implementation   Pali Rohár
• [pulseaudio-discuss] [PATCH 8/8] rtp: Add a GStreamer-based RTP implementation   Arun Raghavan
• [pulseaudio-discuss] [PATCH 0/8] Add GStreamer-based RTP support   Felipe Sateler
• [pulseaudio-discuss] [PATCH 0/8] Add GStreamer-based RTP support   Arun Raghavan
• [pulseaudio-discuss] [PATCH 1/6] stream: Add a pa_stream_set_volume() API   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH 1/6] stream: Add a pa_stream_set_volume() API   Tanu Kaskinen
• [pulseaudio-discuss] Recording from USB devices without channel mixing   Klaus Jaensch
• [pulseaudio-discuss] Recording from USB devices without channel mixing   Tanu Kaskinen
• [pulseaudio-discuss] [PATCH] allow-passthrough module   Guillaume Desmottes
• [pulseaudio-discuss] Recording from USB devices without channel mixing   Klaus Jaensch
• [pulseaudio-discuss] [PATCH 0/8] Add GStreamer-based RTP support   Rémi Denis-Courmont
• [pulseaudio-discuss] [PATCH 0/8] Add GStreamer-based RTP support   Arun Raghavan

Last message date: Mon Feb 29 18:07:40 UTC 2016
Archived on: Mon Feb 29 18:07:45 UTC 2016

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...