<p><br>
>>  ><br>
>>  > I'd prefer a multi-purpose configuration with multiple<br>
>> sinks/sources:<br>
>>  ><br>
>>  > - Source 'DAW':                   aux1,aux2,aux3,aux4,aux5,aux6<br>
>>  > - Source 'Mic/Instrument':        channel 0/1 = left/right<br>
>>  > - Source 'Line':                  channel 2/3 = left/right<br>
>>  > - Source 'S/PDIF'                 channel 4/5 = left/right<br>
>>  > - Source 'TV'                     channel 4/5 = left/right<br>
>> (=S/PDIF)<br>
>>  ><br>
>>  > - Sink   'DAW':<br>
>> aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9,aux10<br>
>>  > - Sink   'Stereo1/Headphone A':   channel 0/1 = left/right<br>
>>  > - Sink   'Stereo2/Headphone B':   channel 2/3 = left/right<br>
>>  > - Sink   'Stereo3':               channel 4/5 = left/right<br>
>>  > - Sink   'Stereo4':               channel 6/7 = left/right<br>
>>  > - Sink   'Stereo5/SPDIF':         channel 8/9 = left/right<br>
>>  > - Sink   'Surround 7.1':          front-left, front-right,<br>
>> rear-left, rear-right, center, lfe, side-left, side-right<br>
>>  > - Sink   'Surround 7.1 -> 5.0':   front-left, front-right,<br>
>> rear-left, rear-right, center, lfe -> front-left + front-right,<br>
>> side-left -> front-left + rear-left, side-right -> front-right +<br>
>> rear-right<br>
>><br>
>> <a href="http://cgit.freedesktop.org/pulseaudio/pulseaudio/plain/src/modules/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf">http://cgit.freedesktop.org/pulseaudio/pulseaudio/plain/src/modules/alsa/mixer/profile-sets/native-instruments-traktor-audio10.conf</a><br>
>> [1]<br>
>><br>
>><br>
>> Pulseaudio only support different device<br>
>><br>
>> If your driver only have simgle device for 10 channel playback and 6<br>
>> channel capture<br>
><br>
><br>
> ALSA provides the following hardware-devices/plugs:<br>
><br>
> - sysdefault:CARD=FCA610<br>
> - front:CARD=FCA610,DEV=0<br>
> - surround21:CARD=FCA610,DEV=0<br>
> - surround40:CARD=FCA610,DEV=0<br>
> - surround41:CARD=FCA610,DEV=0<br>
> - surround50:CARD=FCA610,DEV=0<br>
> - surround51:CARD=FCA610,DEV=0<br>
> - surround71:CARD=FCA610,DEV=0<br>
> - iec958:CARD=FCA610,DEV=0<br>
> - dmix:CARD=FCA610,DEV=0<br>
> - dsnoop:CARD=FCA610,DEV=0<br>
> - hw:CARD=FCA610,DEV=0<br>
> - plughw:CARD=FCA610,DEV=0<br></p>
<p>Are you sure that those devices really work ?<br>
</p>