[Spice-devel] [PATCH 2/2] Add controller messages for USB redirection

[flooding Controlled]

Oh~~ I am sorry that in my company we have to use vms... Though I think
that a real machine is more perfect...

I catch a new part of log with my USB plugin in .


Bus 001 Device 003: ID 154b:6001 PNY
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x154b PNY
  idProduct          0x6001
  bcdDevice            1.00
  iManufacturer           1 PNY
  iProduct                2 Lovely Attache
  iSerial                 3 0000000000011F
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           39
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0x80
      (Bus Powered)
    MaxPower               98mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           3
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk (Zip)
      iInterface              0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               1
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               8
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)


Is there a rule matched ?


2012/7/24 Hans de Goede <hdegoede at redhat.com>

> Hi,
>
>
> On 07/24/2012 03:56 PM, flooding Controlled wrote:
>
>> Yes! Can you tell me how to reflect the rule value to the log I attatch ?
>>
>
> So have you redirect the printer to the vmware-vm ? Otherwise things don't
> work also stacking redirection on redirection is going to be really
> hard to debug ... Can you please run the client under Linux running
> directly on the hardware, rather then in a vm ?
>
> Regards,
>
> Hans
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.freedesktop.org/archives/spice-devel/attachments/20120724/1c2fcf3c/attachment.html>