[ANNOUNCE] xf86-video-ati 18.104.22.168 - release candidate
gene.heskett at verizon.net
Mon Dec 22 21:25:08 PST 2008
On Monday 22 December 2008, Dave Airlie wrote:
>This is a pre-release of what will be called xf86-video-ati 6.9.1
>This contains a lot of bugfixes/enhancements, highlights include
>Output support for all radeon chips from r100 to rv730 (mergedfb accel for
> all r600 and newer) - rv710/730 DCE3.2 support
> - Initial eMac support
> - better HDMI support
>Enhanced textured video support
> - Bicubic shaders
> - Large triangle rendering to decrease tearing
> - vsynced Xv
>Interlaced mode support
>Lots of EXA correctness and stability fixes
>Big-endian atombios support.
>Initial ATOM tv-out support. This is disabled by default currently,
>(please use the Option "ATOMTvOut" "TRUE" option in xorg.conf to test).
>Adam Jackson (2):
> Fix connector table mapping for lvtma/kaleidoscope/uniphy.
> Fix HDMI output setup on DIG1/DIG2.
>Adrian Friedli (1):
> Add another AGP quirk
>Alex Deucher (80):
> Revert "IGP: attempt to fix VGA on IGP chips"
> RADEON: IGP VGA fixes take 2
> RS4xx: enable the DRI by default on all variants
> Revert "rotate: fix rotation in conf file."
> Add quirk for Falcon NW laptop
> Fix cursor with multi-head and rotation
> Make sure cursor offsets are properly aligned when using EXA
> R300: NUM_FPU adjustments for VAP_CNTL
> ATOM: Add support for UpdateCRTC_DoubleBufferRegisters cmd table
> ATOM: fix for r4xx cards with no VRAM_Usage tables
> Add oem quirk for external tmds setup on Dell Inspiron 8600
> Clean up legacy display watermark setup
> Clear display priority bits before resetting them
> Interlaced mode fixups for AVIVO chips
> First pass at InitDispBandwidth() for AVIVO chips
> Add quirk for oem x300 card
> Fix error in driver connector table for powerbook w/ vga
> Change prim types for exa and textured video to help avoid tearing
> IGP: Updated quirk handling
> IGP: attempt to get external TMDS working
> IGP: fix typo in IGP quirk handling
> Remove un-needed dac check for single crtc cards
> RS4xx: Fix up ddc gpio
> RS4xx DDC fixes take 3
> Fix VT switching on M6 chips
> Further cleanup and unification of i2c code
> Remove reset of 3D scissor registers when using the CP in the ddx
> PLL adjustments
> Whitespace cleanup from bucubic merge
> Additional cleanups and re-arragement following bicubic merge
> match textured video macro names with other accel code
> Move CP into a separate struct
> Move accel state to a separate struct
> Move DRI to a separate struct
> Switch to using radeon_drm.h from the drm
> Convert randr, Xv to a common allocator
> Bicubic fixes from the last cherry-pick
> Switch cursors over to generic allocator
> Switch EXA path back to static cursor allocation
> fix some fallout from the common allocator
> radeon: Add quirk for macbook
> Fix copy/paste error in the last commit
> more macbook fixes
> cleanup macbook quirk
> radeon: Further pll adjustments
> atombios updates from upstream
> Workaround to make initial rotation work
> proper fix for initial rotation
> man page updates
> Add support for DDC via atom commands for RV410
> Refactor atom LCD/DFP output setup
> Turn coherent mode off by default on DVI
> set grey levels correctly for temporal dithering
> Fixups from last DFP/LCD refactor
> Fix grey level dithering setup
> Add LCD dithering quirk for macbook pro
> Check for LVDS on all IGP chips
> Don't support rotation is accel is not available
> Get hardcoded edid from the bios for servers that support it
> Fix up posted logic
> radeon: fixup shared DDC lines for some rv610 cards.
> Add quirk for r200 card with the primary dac wired to both ports
> move 3d state init after RADEON_SWITCH_TO_3D()
> Only flush IB when direct rendering is enabled
> Make sure 3D state is emited when switching to 3D IB
> Fix up US setup after r3xx bicubic merge
> First pass at tear-free accel
> Make VSync for EXA and Xv configurable
> set coherent mode consistently (enabled for now)
> R200: Remove scissor setup from init3d()
> Add missing .TP in man page
> Add randr 1.3 panning support
> Add another AGP quirk
> Add support for Apple eMacs
> Remove mention of MergedFB from server log
> Remove remnants of unused DDCMode option
> R3xx-R5xx: switch back to quad rendering for Xv
> R2xx: switch EXA composite to rects rather quads
> Pre-avivo: fix FP setup
> R3xx-R5xx: better fix for xv primitive tearing issues
>Benjamin Close (1):
> xf86misc extension has been removed, update driver to reflect it
>Benjamin Herrenschmidt (3):
> atombios: add support for other endians.
> Fix console switch on R500
> radeon: Fix PCI usage of 32-bit driver on 64-bit platform
>Brice Goglin (2):
> use PACKAGE_VERSION_* for radeon version
> Increase default GART size to 32MB on >=R300
>Bryce Harrington (4):
> radeon: Fix pasto in connector table setup for vga powerbooks
> Add AGP quirk table
> Additional AGP quirks
> Add another AGP quirk
>Calvin Fong (1):
> IGP: add support for NTSC tv-out on legacy IGP chips
>Corbin Simpson (21):
> Add bicubic texture table, as well as the script used to (re)generate
> it. To regenerate, just run "python bicubic_table.py > bicubic_table.h".
> Fixed typos in the bicubic texture tables. Whoops, looks like I'm still
> asleep. Allocate memory for the bicubic filter texture.
> Upload bicubic filter to card. This was a LOT easier than I had
> feared, to be honest. Upload pixel shader to card for r5xx. This was
> ridiculous. Also it doesn't work yet... Try to get tex coords from the VAP
> to RS properly when bicubic filtering is enabled. Make vertices emit
> More bicubic FP buggies.
> Finally got the fragment program fully working for bicubic filtering
> on r5xx. Fix constants.
> Merge upstream changes to vertices, and also add Xv attributes for
> textured video, including bicubic filtering. Oops, made a mistake with
> Bump bicubic cutoff to R580.
> Force R580-only for bicubic.
> Update bicubic tables.
> Enable bicubic filtering for all r5xx HW.
> Change floats to uint32_t hex.
> Switch from 32-bit floats to 16-bit half-floats.
> Switch to Mesa-style 24-bit float packing.
> r3xx: Various Xv fixes.
> Fix indentation on IS_R300_3D Xv code.
>Dave Airlie (42):
> radeon: drop all use of CPMode.
> rotate: fix rotation in conf file.
> rv770 initial support
> pciid: add radeon HD3850.
> atombios: use macro to get offset into table
> atombios: fix typo in mode conversion for panel
> radeon: make r600 use i2c table lookup for ddc.
> radeon: add 0x9441 for hd 4870 x2
> radeon: fix powerpc build
> radeon: rename radeon_memory to radeon_legacy_memory.
> radeon: hopefully fix plls for 30" monitors.
> atombios: set missing pixel clock
> atombios: oops typo
> pciid: add HD3300 - 790GX chipset.
> radeon: always align dstPitch to 64 bytes for textured video
> r100/r200: EXA misrenders dst == a8 + dst alpha use.
> radeon_drm.h: remove kernel defines
> radeon: fix HDMI having DACs in some BIOSes
> Stability fixes from radeon-gem-cs
> Don't mix 2D and 3D in the same IB
> radeon: apply atom quirks to object table
> radeon: damn you bios, HDMI cannot have DACs.
> radeon: memset the pll setting function
> r600: don't idle engine
> radeon: fixes from Alex for some output engines
> DCE32: add support for DCE3.2 digital outputs.
> radeon: add initial rv730 pciids.
> atombios: fix issue with Clearing of MM_INDEX 0.
> atombios: correct fix for previous issue.
> atombios: fixup parsing of TV tables on r500 and r600 cards.
> atom/tv: fixup the tv out default if bios doesn't specify
> atom/tv: enable scaler can set the TV output scaler up.
> atom: spc3 only requires ucEncoderMode for DIG outputs
> radeon: use latest atombios constants for TV encoders in
> set_crtc_source atom/r600: re-enable TV outputs
> atombios: re-enable TV dpms
> radeon: tv timings have crev/frev wrong way around for some reason.
> radeon: add all new pci ids for rv730/rv710 families
> radeon: setup 3D engine even when no DRI.
> atombios/tv: add an option to enable atom tv-out for users.
> radeon: pass distcheck
> radeon: update to 22.214.171.124
>Dennis Kasprzyk (12):
> Fix texture size, texture filter, vertex offsets, etc.
> Set helper texture filter correctly.
> Implement LPR in one instruction.
> Remove uneeded negations.
> Heavy optimizations.
> Remove one constant.
> Smarter usage of the texture semaphore.
> Another uneeded SEM_AQUIRE.
> Move some ALU instructions after the TEX instructions, so we can do
> something usefull while we are waiting for the texture values. Fixed
> bicubic fragment program comments.
> Fix bicubic fp calculation.
> Fix typos.
>Egbert Eich (1):
> Cleanups from rhd port
>Eygene Ryabinkin (1):
> Catch unsubstituted macro for PCI region base access
> Fix formatting in man page
> Remove duplicate ATI in some device names
> man page updates
>Joseph Adams (1):
> Add more eMac modes, fix crash in last patch
>Julien Cristau (2):
> Link with -lpciaccess and -ldrm if needed
> Bug#7148: Fix manpage formatting
>Maciej Cencora (3):
> Add needed FP registers, etc. for r3xx bicubic Xv.
> Add r3xx-specific bicubic filtering code. FP, RS, mostly, everything
> else is shared with r5xx. Enable bicubic Xv on r3xx+. Still some buggies in
> the actual display, but looks pretty good.
>Michel Dänzer (7):
> Restore versioning of interface for Mesa DRI driver.
> Only declare local variable when it's used.
> Call DRM modeset ioctl after the IRQ has been initialized.
> Make sure video offerlay offsets don't exceed the hardware limit of
> 128 MB. Fix -Werror build.
> Update GEN_INT_CNTL register value after calling DRM modeset ioctl.
> Pass base offset into RADEONDisplayVideo() explicitly.
>Owain Gordon Ainsworth (1):
> radeon: don't call ioctl unless DRI is initialised
>Patrick Haller (1):
> Fix off by one in EXA composite limit checking
>Pierre Ossman (10):
> Fix comments for R500 fragment shader to reflect the code.
> Fix node setup on R300 bicubic pixel shader. It was backwards and used
> Fix macros so that they are safe to use with expressions as
> parameters. Now that we have a bicubic code path that messes up the pixel
> shader, Make the R300 bicubic shader program a bit easier to understand by
> Change the XV_BICUBIC attribute to a tristate, where the third state Switch
> r200 Xv to use rect lists rather than quads to avoid tearing Improve
> tearing avoidance for Xvideo in two steps
> Optimise RADEONWaitForVLine
> Fix scissor setup for Xv
>Ramon van der Stelt (1):
> Interlaced mode fixes
>Roland Scheidegger (1):
> clamp tex coords (r100/r200) for textured video
>Wolke Liu (1):
> Add pci id for FireMV 2400
>git tag: xf86-video-ati-126.96.36.199
>1.tar.bz2 MD5: ec6eda1fb77cf2a289e31f2b54edd056
> xf86-video-ati-188.8.131.52.tar.bz2 SHA1:
> 710827ccbf2ad3660fde9ad9a8aab91b7820af54 xf86-video-ati-184.108.40.206.tar.bz2
>1.tar.gz MD5: b5c547bfbe7a164845fbda6ab482edba
> xf86-video-ati-220.127.116.11.tar.gz SHA1:
> 71a6d1ff9157c7f8ef44ea5537bf165d76bd6e6e xf86-video-ati-18.104.22.168.tar.gz
Dave, FU8 system, quad core phenom. ./configure --prefix=/usr, no errors.
Make OTOH, trundles along for a few files and then gets all choked up:
gcc -DHAVE_CONFIG_H -I. -I.. -I./AtomBios/includes -Wall -I/usr/include/xorg -I/usr/include/drm -I/usr/include/X11/dri -DDISABLE_EASF -DENABLE_ALL_SERVICE_FUNCTIONS -DATOM_BIOS -DATOM_BIOS_PARSER -DDRIVER_PARSER -g -O2 -MT
radeon_accel.lo -MD -MP -MF .deps/radeon_accel.Tpo -c
radeon_accel.c -fPIC -DPIC -o .libs/radeon_accel.o
radeon_accel.c: In function 'RADEONEngineInit':
radeon_accel.c:383: error: 'RADEON_PARAM_NUM_GB_PIPES' undeclared (first use
in this function)
radeon_accel.c:383: error: (Each undeclared identifier is reported only once
radeon_accel.c:383: error: for each function it appears in.)
make: *** [radeon_accel.lo] Error 1
make: Leaving directory `/usr/src/xf86-video-ati-22.214.171.124/src'
make: *** [all-recursive] Error 1
make: Leaving directory `/usr/src/xf86-video-ati-126.96.36.199'
make: *** [all] Error 2
What am I missing?
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
To annoy people.
More information about the xorg