Synaptics touchpad right click doen't click properly

[Peter Hutterer]

On Thu, Oct 21, 2010 at 07:06:04PM +0200, Louis Ixo wrote:
> 
> Hi,
> 
> > Did you try to set both ClickFinger1=1 and ClickFinger2=3 simultaneusly in 
> > your hal config?
> 
> Thank you for your suggestion but I tried and it doesn't work.
> 
> In fact using synclient -m 500 and clicking in both bottons (right/left) it shows only l=1 and r=0.
> Here the output, first I clicked on the left button, then on the right, you can see that r is always=0.
> 
>   time     x    y   z f  w  l r u d m     multi  gl gm gr gdx gdy
>    0.000  5600 4889   0 0  0  0 0 0 0 0  00000000   0  0  0   0   0
>    1.501  1512 4869  35 1  4  0 0 0 0 0  00000000   0  0  0   0   0
>    2.001  1503 4860  35 1  4  0 0 0 0 0  00000000   0  0  0   0   0
>    2.501  1495 4852  36 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    3.001  1501 4863  36 1  4  0 0 0 0 0  00000000   0  0  0   0   0
>    3.501  1498 4854  36 1  4  0 0 0 0 0  00000000   0  0  0   0   0
>    4.001  1492 4853  38 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    4.501  1489 4859  38 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    5.001  1515 4872  38 1  4  0 0 0 0 0  00000000   0  0  0   0   0
>    5.501     1 5855   0 0  0  0 0 0 0 0  00000000   0  0  0   0   0
>    6.002  5396 4841  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    6.502  5391 4852  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    7.002  5389 4851  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    7.502  5379 4848  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    8.002  5368 4841  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    9.002  5375 4860  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>    9.503  5378 4858  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
>   10.003  5581 4831  39 1  4  1 0 0 0 0  00000000   0  0  0   0   0
> 
> Let me know if I can reproduce some useful information for you.
> Thank you again,

please run evtest against the device to check if the information we get from
the kernel is correct. note that you need to VT switch away from the server
to get events out of the synaptics device.

Cheers,
  Peter