[PATCH 02/12] drm/amd/display: moving remaining functionality from gpu to dce_clocks
Kai Wasserbäch
kai at dev.carbon-project.org
Thu Dec 8 16:15:26 UTC 2016
Hey Harry,
I can't say much about the overall changes (DAL/DC is a large code base and I've
no deep understanding of it), but I noticed a couple of things regarding
readability, see below.
Harry Wentland wrote on 08.12.2016 02:26:
> From: Dmytro Laktyushkin <Dmytro.Laktyushkin at amd.com>
>
> Change-Id: I2eaf2a49eb3ea492fc1960ef8018462f1a83a472
> Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin at amd.com>
> Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin at amd.com>
> Acked-by: Harry Wentland <Harry.Wentland at amd.com>
> ---
> drivers/gpu/drm/amd/display/dc/Makefile | 7 +-
> drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c | 181 ++++++++++++--
> drivers/gpu/drm/amd/display/dc/dce/dce_clocks.h | 36 ++-
> drivers/gpu/drm/amd/display/dc/gpu/Makefile | 21 --
> .../display/dc/gpu/dce112/display_clock_dce112.c | 277 ---------------------
> .../display/dc/gpu/dce112/display_clock_dce112.h | 79 ------
> drivers/gpu/drm/amd/display/dc/gpu/divider_range.c | 127 ----------
> drivers/gpu/drm/amd/display/dc/gpu/divider_range.h | 62 -----
> drivers/gpu/drm/amd/display/dc/inc/core_types.h | 2 +-
> .../inc/hw/display_clock.h} | 27 +-
> 10 files changed, 206 insertions(+), 613 deletions(-)
> delete mode 100644 drivers/gpu/drm/amd/display/dc/gpu/Makefile
> delete mode 100644 drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.c
> delete mode 100644 drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.h
> delete mode 100644 drivers/gpu/drm/amd/display/dc/gpu/divider_range.c
> delete mode 100644 drivers/gpu/drm/amd/display/dc/gpu/divider_range.h
> rename drivers/gpu/drm/amd/display/{include/display_clock_interface.h => dc/inc/hw/display_clock.h} (75%)
>
> diff --git a/drivers/gpu/drm/amd/display/dc/Makefile b/drivers/gpu/drm/amd/display/dc/Makefile
> index 5fac034093e9..26e2b50e4954 100644
> --- a/drivers/gpu/drm/amd/display/dc/Makefile
> +++ b/drivers/gpu/drm/amd/display/dc/Makefile
> @@ -2,8 +2,7 @@
> # Makefile for Display Core (dc) component.
> #
>
> -DC_LIBS = basics bios calcs dce \
> -gpio gpu i2caux irq virtual
> +DC_LIBS = basics bios calcs dce gpio i2caux irq virtual
>
> DC_LIBS += dce112
> DC_LIBS += dce110
> @@ -14,8 +13,8 @@ AMD_DC = $(addsuffix /Makefile, $(addprefix $(FULL_AMD_DISPLAY_PATH)/dc/,$(DC_LI
>
> include $(AMD_DC)
>
> -DISPLAY_CORE = dc.o dc_link.o dc_resource.o dc_hw_sequencer.o dc_target.o dc_sink.o dc_stream.o \
> -dc_surface.o dc_link_hwss.o dc_link_dp.o dc_link_ddc.o dc_debug.o
> +DISPLAY_CORE = dc.o dc_link.o dc_resource.o dc_hw_sequencer.o dc_target.o dc_sink.o \
> +dc_surface.o dc_link_hwss.o dc_link_dp.o dc_link_ddc.o dc_debug.o dc_stream.o
>
> AMD_DISPLAY_CORE = $(addprefix $(AMDDALPATH)/dc/core/,$(DISPLAY_CORE))
>
> diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c b/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c
> index 846754c16831..c2bd8dc7b4ad 100644
> --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c
> +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.c
> @@ -30,6 +30,8 @@
> #include "bios_parser_interface.h"
> #include "dc.h"
>
> +#define TO_DCE_CLOCKS(clocks)\
> + container_of(clocks, struct dce_disp_clk, base)
>
> #define REG(reg) \
> (clk_dce->regs->reg)
> @@ -41,8 +43,45 @@
> #define CTX \
> clk_dce->base.ctx
>
> +/* Max clock values for each state indexed by "enum clocks_state": */
> +static struct state_dependent_clocks dce80_max_clks_by_state[] = {
> +/* ClocksStateInvalid - should not be used */
> +{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
> +/* ClocksStateUltraLow - not expected to be used for DCE 8.0 */
> +{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
> +/* ClocksStateLow */
> +{ .display_clk_khz = 352000, .pixel_clk_khz = 330000},
> +/* ClocksStateNominal */
> +{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 },
> +/* ClocksStatePerformance */
> +{ .display_clk_khz = 600000, .pixel_clk_khz = 400000 } };
> +
> +static struct state_dependent_clocks dce110_max_clks_by_state[] = {
> +/*ClocksStateInvalid - should not be used*/
> +{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
> +/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
> +{ .display_clk_khz = 352000, .pixel_clk_khz = 330000 },
> +/*ClocksStateLow*/
> +{ .display_clk_khz = 352000, .pixel_clk_khz = 330000 },
> +/*ClocksStateNominal*/
> +{ .display_clk_khz = 467000, .pixel_clk_khz = 400000 },
> +/*ClocksStatePerformance*/
> +{ .display_clk_khz = 643000, .pixel_clk_khz = 400000 } };
> +
> +static struct state_dependent_clocks dce112_max_clks_by_state[] = {
> +/*ClocksStateInvalid - should not be used*/
> +{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
> +/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
> +{ .display_clk_khz = 389189, .pixel_clk_khz = 346672 },
> +/*ClocksStateLow*/
> +{ .display_clk_khz = 459000, .pixel_clk_khz = 400000 },
> +/*ClocksStateNominal*/
> +{ .display_clk_khz = 667000, .pixel_clk_khz = 600000 },
> +/*ClocksStatePerformance*/
> +{ .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } };
Can these be aligned like a table? For example like:
static struct state_dependent_clocks dce112_max_clks_by_state[] = {
{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
{ .display_clk_khz = 389189, .pixel_clk_khz = 346672 },
{ .display_clk_khz = 459000, .pixel_clk_khz = 400000 },
{ .display_clk_khz = 667000, .pixel_clk_khz = 600000 },
{ .display_clk_khz = 1132000, .pixel_clk_khz = 600000 },
};
Bonus points, if you make the alignment match across all of these structs. ;-)
> /* Starting point for each divider range.*/
> -enum divider_range_start {
> +enum dce_divider_range_start {
> DIVIDER_RANGE_01_START = 200, /* 2.00*/
> DIVIDER_RANGE_02_START = 1600, /* 16.00*/
> DIVIDER_RANGE_03_START = 3200, /* 32.00*/
> @@ -51,7 +90,7 @@ enum divider_range_start {
>
> /* Ranges for divider identifiers (Divider ID or DID)
> mmDENTIST_DISPCLK_CNTL.DENTIST_DISPCLK_WDIVIDER*/
> -enum divider_id_register_setting {
> +enum dce_divider_id_register_setting {
> DIVIDER_RANGE_01_BASE_DIVIDER_ID = 0X08,
> DIVIDER_RANGE_02_BASE_DIVIDER_ID = 0X40,
> DIVIDER_RANGE_03_BASE_DIVIDER_ID = 0X60,
> @@ -61,12 +100,112 @@ enum divider_id_register_setting {
> /* Step size between each divider within a range.
> Incrementing the DENTIST_DISPCLK_WDIVIDER by one
> will increment the divider by this much.*/
> -enum divider_range_step_size {
> +enum dce_divider_range_step_size {
> DIVIDER_RANGE_01_STEP_SIZE = 25, /* 0.25*/
> DIVIDER_RANGE_02_STEP_SIZE = 50, /* 0.50*/
> DIVIDER_RANGE_03_STEP_SIZE = 100 /* 1.00 */
> };
>
> +static bool dce_divider_range_construct(
> + struct dce_divider_range *div_range,
> + int range_start,
> + int range_step,
> + int did_min,
> + int did_max)
> +{
Is it guaranteed, that div_range is not a null pointer? This is a common
question and applies to the functions below as well. I expected an
if(!div_range)
return false;
> + div_range->div_range_start = range_start;
> + div_range->div_range_step = range_step;
> + div_range->did_min = did_min;
> + div_range->did_max = did_max;
> +
> + if (div_range->div_range_step == 0) {
> + div_range->div_range_step = 1;
> + /*div_range_step cannot be zero*/
> + BREAK_TO_DEBUGGER();
> + }
> + /* Calculate this based on the other inputs.*/
> + /* See DividerRange.h for explanation of */
> + /* the relationship between divider id (DID) and a divider.*/
> + /* Number of Divider IDs = (Maximum Divider ID - Minimum Divider ID)*/
> + /* Maximum divider identified in this range =
> + * (Number of Divider IDs)*Step size between dividers
> + * + The start of this range.*/
I'd be nice if you used only one opening and one closing statement for the
comment. You can always add a asterisk to the front:
/*
* Multi-line
* comment here
*/
It really took me a while to parse the comment – especially since there are
sometimes spaces between the closing statement and sometimes not.
> + div_range->div_range_end = (did_max - did_min) * range_step
> + + range_start;
> + return true;
> +}
> +
> +static int dce_divider_range_calc_divider(
> + struct dce_divider_range *div_range,
> + int did)
> +{
> + /* Is this DID within our range?*/
> + if ((did < div_range->did_min) || (did >= div_range->did_max))
> + return INVALID_DIVIDER;
> +
> + return ((did - div_range->did_min) * div_range->div_range_step)
> + + div_range->div_range_start;
> +
> +}
> +
> +static int dce_divider_range_calc_did(
> + struct dce_divider_range *div_range,
> + int div)
> +{
> + int did;
> + /* Check before dividing.*/
> + if (div_range->div_range_step == 0) {
> + div_range->div_range_step = 1;
> + /*div_range_step cannot be zero*/
> + BREAK_TO_DEBUGGER();
> + }
> + /* Is this divider within our range?*/
> + if ((div < div_range->div_range_start)
> + || (div >= div_range->div_range_end))
> + return INVALID_DID;
> +/* did = (divider - range_start + (range_step-1)) / range_step) + did_min*/
> + did = div - div_range->div_range_start;
> + did += div_range->div_range_step - 1;
> + did /= div_range->div_range_step;
> + did += div_range->did_min;
> + return did;
> +}
> +
> +static int dce_divider_range_get_divider(
> + struct dce_divider_range *div_range,
> + int ranges_num,
> + int did)
> +{
> + int div = INVALID_DIVIDER;
> + int i;
> +
> + for (i = 0; i < ranges_num; i++) {
> + /* Calculate divider with given divider ID*/
> + div = dce_divider_range_calc_divider(&div_range[i], did);
> + /* Found a valid return divider*/
> + if (div != INVALID_DIVIDER)
> + break;
> + }
> + return div;
> +}
> +
> +static int dce_divider_range_get_did(
> + struct dce_divider_range *div_range,
> + int ranges_num,
> + int divider)
> +{
> + int did = INVALID_DID;
> + int i;
> +
> + for (i = 0; i < ranges_num; i++) {
> + /* CalcDid returns InvalidDid if a divider ID isn't found*/
> + did = dce_divider_range_calc_did(&div_range[i], divider);
> + /* Found a valid return did*/
> + if (did != INVALID_DID)
> + break;
> + }
> + return did;
> +}
>
> static uint32_t dce_clocks_get_dp_ref_freq(struct display_clock *clk)
> {
> @@ -85,7 +224,7 @@ static uint32_t dce_clocks_get_dp_ref_freq(struct display_clock *clk)
> REG_GET(DENTIST_DISPCLK_CNTL, DENTIST_DPREFCLK_WDIVIDER, &dprefclk_wdivider);
>
> /* Convert DENTIST_DPREFCLK_WDIVIDERto actual divider*/
> - target_div = dal_divider_range_get_divider(
> + target_div = dce_divider_range_get_divider(
> clk_dce->divider_ranges,
> DIVIDER_RANGE_MAX,
> dprefclk_wdivider);
> @@ -183,7 +322,7 @@ static bool dce_clock_set_min_clocks_state(
>
> static void dce_set_clock(
> struct display_clock *clk,
> - uint32_t requested_clk_khz)
> + int requested_clk_khz)
> {
> struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
> struct bp_pixel_clock_parameters pxl_clk_params = { 0 };
> @@ -245,7 +384,7 @@ static void dce_psr_wait_loop(
>
> static void dce_psr_set_clock(
> struct display_clock *clk,
> - uint32_t requested_clk_khz)
> + int requested_clk_khz)
> {
> struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
>
> @@ -253,9 +392,9 @@ static void dce_psr_set_clock(
> dce_psr_wait_loop(clk_dce, requested_clk_khz);
> }
>
> -static void polaris_set_clock(
> +static void dce112_set_clock(
> struct display_clock *clk,
> - uint32_t requested_clk_khz)
> + int requested_clk_khz)
> {
> struct dce_disp_clk *clk_dce = TO_DCE_CLOCKS(clk);
> struct bp_set_dce_clock_parameters dce_clk_params;
> @@ -267,7 +406,7 @@ static void polaris_set_clock(
> /* Make sure requested clock isn't lower than minimum threshold*/
> if (requested_clk_khz > 0)
> requested_clk_khz = dm_max(requested_clk_khz,
> - clk_dce->dentist_vco_freq_khz / 64);
> + clk_dce->dentist_vco_freq_khz / 62);
Can you document why 62? Maybe a speaking #define would be best?
Cheers,
Kai
> dce_clk_params.target_clock_frequency = requested_clk_khz;
> dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
> @@ -284,7 +423,9 @@ static void polaris_set_clock(
> /*VBIOS will determine DPREFCLK frequency, so we don't set it*/
> dce_clk_params.target_clock_frequency = 0;
> dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK;
> - dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK = 0;
> + dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK =
> + (dce_clk_params.pll_id ==
> + CLOCK_SOURCE_COMBO_DISPLAY_PLL0);
>
> bp->funcs->set_dce_clock(bp, &dce_clk_params);
> }
> @@ -386,7 +527,7 @@ static const struct display_clock_funcs dce112_funcs = {
> .get_dp_ref_clk_frequency = dce_clocks_get_dp_ref_freq,
> .get_required_clocks_state = dce_get_required_clocks_state,
> .set_min_clocks_state = dce_clock_set_min_clocks_state,
> - .set_clock = polaris_set_clock
> + .set_clock = dce112_set_clock
> };
>
> static const struct display_clock_funcs dce110_funcs = {
> @@ -429,19 +570,19 @@ static void dce_disp_clk_construct(
> dce_clock_read_integrated_info(clk_dce);
> dce_clock_read_ss_info(clk_dce);
>
> - dal_divider_range_construct(
> + dce_divider_range_construct(
> &clk_dce->divider_ranges[DIVIDER_RANGE_01],
> DIVIDER_RANGE_01_START,
> DIVIDER_RANGE_01_STEP_SIZE,
> DIVIDER_RANGE_01_BASE_DIVIDER_ID,
> DIVIDER_RANGE_02_BASE_DIVIDER_ID);
> - dal_divider_range_construct(
> + dce_divider_range_construct(
> &clk_dce->divider_ranges[DIVIDER_RANGE_02],
> DIVIDER_RANGE_02_START,
> DIVIDER_RANGE_02_STEP_SIZE,
> DIVIDER_RANGE_02_BASE_DIVIDER_ID,
> DIVIDER_RANGE_03_BASE_DIVIDER_ID);
> - dal_divider_range_construct(
> + dce_divider_range_construct(
> &clk_dce->divider_ranges[DIVIDER_RANGE_03],
> DIVIDER_RANGE_03_START,
> DIVIDER_RANGE_03_STEP_SIZE,
> @@ -462,6 +603,10 @@ struct display_clock *dce_disp_clk_create(
> return NULL;
> }
>
> + memcpy(clk_dce->max_clks_by_state,
> + dce80_max_clks_by_state,
> + sizeof(dce80_max_clks_by_state));
> +
> dce_disp_clk_construct(
> clk_dce, ctx, regs, clk_shift, clk_mask);
>
> @@ -481,6 +626,10 @@ struct display_clock *dce110_disp_clk_create(
> return NULL;
> }
>
> + memcpy(clk_dce->max_clks_by_state,
> + dce110_max_clks_by_state,
> + sizeof(dce110_max_clks_by_state));
> +
> dce_disp_clk_construct(
> clk_dce, ctx, regs, clk_shift, clk_mask);
>
> @@ -502,6 +651,10 @@ struct display_clock *dce112_disp_clk_create(
> return NULL;
> }
>
> + memcpy(clk_dce->max_clks_by_state,
> + dce112_max_clks_by_state,
> + sizeof(dce112_max_clks_by_state));
> +
> dce_disp_clk_construct(
> clk_dce, ctx, regs, clk_shift, clk_mask);
>
> diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.h b/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.h
> index e3b23749f0a2..4ad6fe4c2841 100644
> --- a/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.h
> +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_clocks.h
> @@ -27,12 +27,7 @@
> #ifndef _DCE_CLOCKS_H_
> #define _DCE_CLOCKS_H_
>
> -#include "display_clock_interface.h"
> -#include "../gpu/divider_range.h"
> -
> -
> -#define TO_DCE_CLOCKS(clocks)\
> - container_of(clocks, struct dce_disp_clk, base)
> +#include "display_clock.h"
>
> #define CLK_COMMON_REG_LIST_DCE_BASE() \
> .DPREFCLK_CNTL = mmDPREFCLK_CNTL, \
> @@ -74,13 +69,30 @@ struct dce_disp_clk_registers {
> };
>
> /* Array identifiers and count for the divider ranges.*/
> -enum divider_range_count {
> +enum dce_divider_range_count {
> DIVIDER_RANGE_01 = 0,
> DIVIDER_RANGE_02,
> DIVIDER_RANGE_03,
> DIVIDER_RANGE_MAX /* == 3*/
> };
>
> +enum dce_divider_error_types {
> + INVALID_DID = 0,
> + INVALID_DIVIDER = 1
> +};
> +
> +struct dce_divider_range {
> + int div_range_start;
> + /* The end of this range of dividers.*/
> + int div_range_end;
> + /* The distance between each divider in this range.*/
> + int div_range_step;
> + /* The divider id for the lowest divider.*/
> + int did_min;
> + /* The divider id for the highest divider.*/
> + int did_max;
> +};
> +
> struct dce_disp_clk {
> struct display_clock base;
> const struct dce_disp_clk_registers *regs;
> @@ -88,23 +100,23 @@ struct dce_disp_clk {
> const struct dce_disp_clk_mask *clk_mask;
>
> struct state_dependent_clocks max_clks_by_state[DM_PP_CLOCKS_MAX_STATES];
> - struct divider_range divider_ranges[DIVIDER_RANGE_MAX];
> + struct dce_divider_range divider_ranges[DIVIDER_RANGE_MAX];
>
> bool use_max_disp_clk;
> - uint32_t dentist_vco_freq_khz;
> + int dentist_vco_freq_khz;
>
> /* Cache the status of DFS-bypass feature*/
> bool dfs_bypass_enabled;
> /* Cache the display clock returned by VBIOS if DFS-bypass is enabled.
> * This is basically "Crystal Frequency In KHz" (XTALIN) frequency */
> - uint32_t dfs_bypass_disp_clk;
> + int dfs_bypass_disp_clk;
>
> /* Flag for Enabled SS on GPU PLL */
> bool ss_on_gpu_pll;
> /* GPU PLL SS percentage (if down-spread enabled) */
> - uint32_t gpu_pll_ss_percentage;
> + int gpu_pll_ss_percentage;
> /* GPU PLL SS percentage Divider (100 or 1000) */
> - uint32_t gpu_pll_ss_divider;
> + int gpu_pll_ss_divider;
>
>
> };
> diff --git a/drivers/gpu/drm/amd/display/dc/gpu/Makefile b/drivers/gpu/drm/amd/display/dc/gpu/Makefile
> deleted file mode 100644
> index 6ab4078405f2..000000000000
> --- a/drivers/gpu/drm/amd/display/dc/gpu/Makefile
> +++ /dev/null
> @@ -1,21 +0,0 @@
> -#
> -# Makefile for the 'gpu' sub-component of DAL.
> -# It provides the control and status of HW adapter resources,
> -# that are global for the ASIC and sharable between pipes.
> -
> -GPU = divider_range.o
> -
> -AMD_DAL_GPU = $(addprefix $(AMDDALPATH)/dc/gpu/,$(GPU))
> -
> -AMD_DISPLAY_FILES += $(AMD_DAL_GPU)
> -
> -###############################################################################
> -# DCE 110 family
> -###############################################################################
> -
> -GPU_DCE112 = display_clock_dce112.o
> -
> -AMD_DAL_GPU_DCE112 = $(addprefix $(AMDDALPATH)/dc/gpu/dce112/,$(GPU_DCE112))
> -
> -AMD_DISPLAY_FILES += $(AMD_DAL_GPU_DCE110) $(AMD_DAL_GPU_DCE112)
> -
> diff --git a/drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.c b/drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.c
> deleted file mode 100644
> index e0d67fb6c633..000000000000
> --- a/drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.c
> +++ /dev/null
> @@ -1,277 +0,0 @@
> -/*
> - * Copyright 2012-15 Advanced Micro Devices, Inc.
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining a
> - * copy of this software and associated documentation files (the "Software"),
> - * to deal in the Software without restriction, including without limitation
> - * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> - * and/or sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following conditions:
> - *
> - * The above copyright notice and this permission notice shall be included in
> - * all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - *
> - * Authors: AMD
> - *
> - */
> -
> -#include "dm_services.h"
> -
> -#include "dce/dce_11_2_d.h"
> -#include "dce/dce_11_2_sh_mask.h"
> -
> -#include "include/bios_parser_interface.h"
> -#include "include/fixed32_32.h"
> -#include "include/logger_interface.h"
> -
> -#include "../divider_range.h"
> -
> -#include "display_clock_dce112.h"
> -
> -#define FROM_DISPLAY_CLOCK(base) \
> - container_of(base, struct display_clock_dce112, disp_clk_base)
> -
> -static struct state_dependent_clocks max_clks_by_state[] = {
> -/*ClocksStateInvalid - should not be used*/
> -{ .display_clk_khz = 0, .pixel_clk_khz = 0 },
> -/*ClocksStateUltraLow - currently by HW design team not supposed to be used*/
> -{ .display_clk_khz = 389189, .pixel_clk_khz = 346672 },
> -/*ClocksStateLow*/
> -{ .display_clk_khz = 459000, .pixel_clk_khz = 400000 },
> -/*ClocksStateNominal*/
> -{ .display_clk_khz = 667000, .pixel_clk_khz = 600000 },
> -/*ClocksStatePerformance*/
> -{ .display_clk_khz = 1132000, .pixel_clk_khz = 600000 } };
> -
> -/* Ranges for divider identifiers (Divider ID or DID)
> - mmDENTIST_DISPCLK_CNTL.DENTIST_DISPCLK_WDIVIDER*/
> -enum divider_id_register_setting {
> - DIVIDER_RANGE_01_BASE_DIVIDER_ID = 0X08,
> - DIVIDER_RANGE_02_BASE_DIVIDER_ID = 0X40,
> - DIVIDER_RANGE_03_BASE_DIVIDER_ID = 0X60,
> - DIVIDER_RANGE_MAX_DIVIDER_ID = 0X80
> -};
> -
> -/* Step size between each divider within a range.
> - Incrementing the DENTIST_DISPCLK_WDIVIDER by one
> - will increment the divider by this much.*/
> -enum divider_range_step_size {
> - DIVIDER_RANGE_01_STEP_SIZE = 25, /* 0.25*/
> - DIVIDER_RANGE_02_STEP_SIZE = 50, /* 0.50*/
> - DIVIDER_RANGE_03_STEP_SIZE = 100 /* 1.00 */
> -};
> -
> -static struct divider_range divider_ranges[DIVIDER_RANGE_MAX];
> -
> -
> -void dispclk_dce112_destroy(struct display_clock **base)
> -{
> - struct display_clock_dce112 *dc112;
> -
> - dc112 = DCLCK112_FROM_BASE(*base);
> -
> - dm_free(dc112);
> -
> - *base = NULL;
> -}
> -
> -static bool display_clock_integrated_info_construct(
> - struct display_clock_dce112 *disp_clk)
> -{
> - struct integrated_info info;
> - uint32_t i;
> - struct display_clock *base = &disp_clk->disp_clk_base;
> -
> - memset(&info, 0, sizeof(struct integrated_info));
> -
> - disp_clk->dentist_vco_freq_khz = info.dentist_vco_freq;
> - if (disp_clk->dentist_vco_freq_khz == 0)
> - disp_clk->dentist_vco_freq_khz = 3600000;
> -
> - base->min_display_clk_threshold_khz =
> - disp_clk->dentist_vco_freq_khz / 64;
> -
> - /*update the maximum display clock for each power state*/
> - for (i = 0; i < NUMBER_OF_DISP_CLK_VOLTAGE; ++i) {
> - enum dm_pp_clocks_state clk_state = DM_PP_CLOCKS_STATE_INVALID;
> -
> - switch (i) {
> - case 0:
> - clk_state = DM_PP_CLOCKS_STATE_ULTRA_LOW;
> - break;
> -
> - case 1:
> - clk_state = DM_PP_CLOCKS_STATE_LOW;
> - break;
> -
> - case 2:
> - clk_state = DM_PP_CLOCKS_STATE_NOMINAL;
> - break;
> -
> - case 3:
> - clk_state = DM_PP_CLOCKS_STATE_PERFORMANCE;
> - break;
> -
> - default:
> - clk_state = DM_PP_CLOCKS_STATE_INVALID;
> - break;
> - }
> -
> - /*Do not allow bad VBIOS/SBIOS to override with invalid values,
> - * check for > 100MHz*/
> - if (info.disp_clk_voltage[i].max_supported_clk >= 100000) {
> - (disp_clk->max_clks_by_state + clk_state)->
> - display_clk_khz =
> - info.disp_clk_voltage[i].max_supported_clk;
> - }
> - }
> -
> - return true;
> -}
> -
> -void dce112_set_clock(
> - struct display_clock *base,
> - uint32_t requested_clk_khz)
> -{
> - struct bp_set_dce_clock_parameters dce_clk_params;
> - struct dc_bios *bp = base->ctx->dc_bios;
> -
> - /* Prepare to program display clock*/
> - memset(&dce_clk_params, 0, sizeof(dce_clk_params));
> -
> - /* Make sure requested clock isn't lower than minimum threshold*/
> - if (requested_clk_khz > 0)
> - requested_clk_khz = dm_max(requested_clk_khz,
> - base->min_display_clk_threshold_khz);
> -
> - dce_clk_params.target_clock_frequency = requested_clk_khz;
> - dce_clk_params.pll_id = CLOCK_SOURCE_ID_DFS;
> - dce_clk_params.clock_type = DCECLOCK_TYPE_DISPLAY_CLOCK;
> -
> - bp->funcs->set_dce_clock(bp, &dce_clk_params);
> -
> - /* from power down, we need mark the clock state as ClocksStateNominal
> - * from HWReset, so when resume we will call pplib voltage regulator.*/
> - if (requested_clk_khz == 0)
> - base->cur_min_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
> -
> - /*Program DP ref Clock*/
> - /*VBIOS will determine DPREFCLK frequency, so we don't set it*/
> - dce_clk_params.target_clock_frequency = 0;
> - dce_clk_params.clock_type = DCECLOCK_TYPE_DPREFCLK;
> - dce_clk_params.flags.USE_GENLOCK_AS_SOURCE_FOR_DPREFCLK =
> - (dce_clk_params.pll_id ==
> - CLOCK_SOURCE_COMBO_DISPLAY_PLL0);
> -
> - bp->funcs->set_dce_clock(bp, &dce_clk_params);
> -}
> -
> -static const struct display_clock_funcs funcs = {
> - .destroy = dispclk_dce112_destroy,
> - .set_clock = dce112_set_clock,
> -};
> -
> -bool dal_display_clock_dce112_construct(
> - struct display_clock_dce112 *dc112,
> - struct dc_context *ctx)
> -{
> - struct display_clock *dc_base = &dc112->disp_clk_base;
> -
> - dc_base->ctx = ctx;
> - dc_base->min_display_clk_threshold_khz = 0;
> -
> - dc_base->cur_min_clks_state = DM_PP_CLOCKS_STATE_INVALID;
> -
> - dc_base->funcs = &funcs;
> -
> - dc112->dfs_bypass_disp_clk = 0;
> -
> - if (!display_clock_integrated_info_construct(dc112))
> - dm_logger_write(dc_base->ctx->logger, LOG_WARNING,
> - "Cannot obtain VBIOS integrated info\n");
> -
> - dc112->gpu_pll_ss_percentage = 0;
> - dc112->gpu_pll_ss_divider = 1000;
> - dc112->ss_on_gpu_pll = false;
> -
> -/* Initially set max clocks state to nominal. This should be updated by
> - * via a pplib call to DAL IRI eventually calling a
> - * DisplayEngineClock_dce112::StoreMaxClocksState(). This call will come in
> - * on PPLIB init. This is from DCE5x. in case HW wants to use mixed method.*/
> - dc_base->max_clks_state = DM_PP_CLOCKS_STATE_NOMINAL;
> -
> - dc112->disp_clk_base.min_display_clk_threshold_khz =
> - (dc112->dentist_vco_freq_khz / 62);
> -
> - dal_divider_range_construct(
> - ÷r_ranges[DIVIDER_RANGE_01],
> - DIVIDER_RANGE_01_START,
> - DIVIDER_RANGE_01_STEP_SIZE,
> - DIVIDER_RANGE_01_BASE_DIVIDER_ID,
> - DIVIDER_RANGE_02_BASE_DIVIDER_ID);
> - dal_divider_range_construct(
> - ÷r_ranges[DIVIDER_RANGE_02],
> - DIVIDER_RANGE_02_START,
> - DIVIDER_RANGE_02_STEP_SIZE,
> - DIVIDER_RANGE_02_BASE_DIVIDER_ID,
> - DIVIDER_RANGE_03_BASE_DIVIDER_ID);
> - dal_divider_range_construct(
> - ÷r_ranges[DIVIDER_RANGE_03],
> - DIVIDER_RANGE_03_START,
> - DIVIDER_RANGE_03_STEP_SIZE,
> - DIVIDER_RANGE_03_BASE_DIVIDER_ID,
> - DIVIDER_RANGE_MAX_DIVIDER_ID);
> -
> - {
> - uint32_t ss_info_num =
> - ctx->dc_bios->funcs->
> - get_ss_entry_number(ctx->dc_bios, AS_SIGNAL_TYPE_GPU_PLL);
> -
> - if (ss_info_num) {
> - struct spread_spectrum_info info;
> - bool result;
> -
> - memset(&info, 0, sizeof(info));
> -
> - result =
> - (BP_RESULT_OK == ctx->dc_bios->funcs->
> - get_spread_spectrum_info(ctx->dc_bios,
> - AS_SIGNAL_TYPE_GPU_PLL, 0, &info)) ? true : false;
> -
> -
> - /* Based on VBIOS, VBIOS will keep entry for GPU PLL SS
> - * even if SS not enabled and in that case
> - * SSInfo.spreadSpectrumPercentage !=0 would be sign
> - * that SS is enabled
> - */
> - if (result && info.spread_spectrum_percentage != 0) {
> - dc112->ss_on_gpu_pll = true;
> - dc112->gpu_pll_ss_divider =
> - info.spread_percentage_divider;
> -
> - if (info.type.CENTER_MODE == 0) {
> - /* Currently for DP Reference clock we
> - * need only SS percentage for
> - * downspread */
> - dc112->gpu_pll_ss_percentage =
> - info.spread_spectrum_percentage;
> - }
> - }
> -
> - }
> - }
> -
> - dc112->use_max_disp_clk = true;
> - dc112->max_clks_by_state = max_clks_by_state;
> -
> - return true;
> -}
> -
> diff --git a/drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.h b/drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.h
> deleted file mode 100644
> index 0743c514a60f..000000000000
> --- a/drivers/gpu/drm/amd/display/dc/gpu/dce112/display_clock_dce112.h
> +++ /dev/null
> @@ -1,79 +0,0 @@
> -/*
> - * Copyright 2012-15 Advanced Micro Devices, Inc.
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining a
> - * copy of this software and associated documentation files (the "Software"),
> - * to deal in the Software without restriction, including without limitation
> - * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> - * and/or sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following conditions:
> - *
> - * The above copyright notice and this permission notice shall be included in
> - * all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - *
> - * Authors: AMD
> - *
> - */
> -#ifndef __DAL_DISPLAY_CLOCK_DCE112_H__
> -#define __DAL_DISPLAY_CLOCK_DCE112_H__
> -
> -#include "display_clock_interface.h"
> -
> -struct display_clock_dce112 {
> - struct display_clock disp_clk_base;
> - bool use_max_disp_clk;
> - uint32_t dentist_vco_freq_khz;
> - /* Cache the status of DFS-bypass feature*/
> - bool dfs_bypass_enabled;
> - /* GPU PLL SS percentage (if down-spread enabled) */
> - uint32_t gpu_pll_ss_percentage;
> - /* GPU PLL SS percentage Divider (100 or 1000) */
> - uint32_t gpu_pll_ss_divider;
> - /* Flag for Enabled SS on GPU PLL */
> - bool ss_on_gpu_pll;
> - /* Cache the display clock returned by VBIOS if DFS-bypass is enabled.
> - * This is basically "Crystal Frequency In KHz" (XTALIN) frequency */
> - uint32_t dfs_bypass_disp_clk;
> - struct state_dependent_clocks *max_clks_by_state;
> -
> -};
> -
> -#define DCLCK112_FROM_BASE(dc_base) \
> - container_of(dc_base, struct display_clock_dce112, disp_clk_base)
> -
> -/* Array identifiers and count for the divider ranges.*/
> -enum divider_range_count {
> - DIVIDER_RANGE_01 = 0,
> - DIVIDER_RANGE_02,
> - DIVIDER_RANGE_03,
> - DIVIDER_RANGE_MAX /* == 3*/
> -};
> -
> -/* Starting point for each divider range.*/
> -enum divider_range_start {
> - DIVIDER_RANGE_01_START = 200, /* 2.00*/
> - DIVIDER_RANGE_02_START = 1600, /* 16.00*/
> - DIVIDER_RANGE_03_START = 3200, /* 32.00*/
> - DIVIDER_RANGE_SCALE_FACTOR = 100 /* Results are scaled up by 100.*/
> -};
> -
> -bool dal_display_clock_dce112_construct(
> - struct display_clock_dce112 *dc112,
> - struct dc_context *ctx);
> -
> -void dispclk_dce112_destroy(struct display_clock **base);
> -
> -void dce112_set_clock(
> - struct display_clock *base,
> - uint32_t requested_clk_khz);
> -
> -
> -#endif /* __DAL_DISPLAY_CLOCK_DCE112_H__ */
> diff --git a/drivers/gpu/drm/amd/display/dc/gpu/divider_range.c b/drivers/gpu/drm/amd/display/dc/gpu/divider_range.c
> deleted file mode 100644
> index 59d44004411b..000000000000
> --- a/drivers/gpu/drm/amd/display/dc/gpu/divider_range.c
> +++ /dev/null
> @@ -1,127 +0,0 @@
> -/*
> - * Copyright 2012-15 Advanced Micro Devices, Inc.
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining a
> - * copy of this software and associated documentation files (the "Software"),
> - * to deal in the Software without restriction, including without limitation
> - * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> - * and/or sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following conditions:
> - *
> - * The above copyright notice and this permission notice shall be included in
> - * all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - *
> - * Authors: AMD
> - *
> - */
> -#include "dm_services.h"
> -#include "divider_range.h"
> -
> -bool dal_divider_range_construct(
> - struct divider_range *div_range,
> - uint32_t range_start,
> - uint32_t range_step,
> - uint32_t did_min,
> - uint32_t did_max)
> -{
> - div_range->div_range_start = range_start;
> - div_range->div_range_step = range_step;
> - div_range->did_min = did_min;
> - div_range->did_max = did_max;
> -
> - if (div_range->div_range_step == 0) {
> - div_range->div_range_step = 1;
> - /*div_range_step cannot be zero*/
> - BREAK_TO_DEBUGGER();
> - }
> - /* Calculate this based on the other inputs.*/
> - /* See DividerRange.h for explanation of */
> - /* the relationship between divider id (DID) and a divider.*/
> - /* Number of Divider IDs = (Maximum Divider ID - Minimum Divider ID)*/
> - /* Maximum divider identified in this range =
> - * (Number of Divider IDs)*Step size between dividers
> - * + The start of this range.*/
> - div_range->div_range_end = (did_max - did_min) * range_step
> - + range_start;
> - return true;
> -}
> -
> -static uint32_t dal_divider_range_calc_divider(
> - struct divider_range *div_range,
> - uint32_t did)
> -{
> - /* Is this DID within our range?*/
> - if ((did < div_range->did_min) || (did >= div_range->did_max))
> - return INVALID_DIVIDER;
> -
> - return ((did - div_range->did_min) * div_range->div_range_step)
> - + div_range->div_range_start;
> -
> -}
> -
> -static uint32_t dal_divider_range_calc_did(
> - struct divider_range *div_range,
> - uint32_t div)
> -{
> - uint32_t did;
> - /* Check before dividing.*/
> - if (div_range->div_range_step == 0) {
> - div_range->div_range_step = 1;
> - /*div_range_step cannot be zero*/
> - BREAK_TO_DEBUGGER();
> - }
> - /* Is this divider within our range?*/
> - if ((div < div_range->div_range_start)
> - || (div >= div_range->div_range_end))
> - return INVALID_DID;
> -/* did = (divider - range_start + (range_step-1)) / range_step) + did_min*/
> - did = div - div_range->div_range_start;
> - did += div_range->div_range_step - 1;
> - did /= div_range->div_range_step;
> - did += div_range->did_min;
> - return did;
> -}
> -
> -uint32_t dal_divider_range_get_divider(
> - struct divider_range *div_range,
> - uint32_t ranges_num,
> - uint32_t did)
> -{
> - uint32_t div = INVALID_DIVIDER;
> - uint32_t i;
> -
> - for (i = 0; i < ranges_num; i++) {
> - /* Calculate divider with given divider ID*/
> - div = dal_divider_range_calc_divider(&div_range[i], did);
> - /* Found a valid return divider*/
> - if (div != INVALID_DIVIDER)
> - break;
> - }
> - return div;
> -}
> -uint32_t dal_divider_range_get_did(
> - struct divider_range *div_range,
> - uint32_t ranges_num,
> - uint32_t divider)
> -{
> - uint32_t did = INVALID_DID;
> - uint32_t i;
> -
> - for (i = 0; i < ranges_num; i++) {
> - /* CalcDid returns InvalidDid if a divider ID isn't found*/
> - did = dal_divider_range_calc_did(&div_range[i], divider);
> - /* Found a valid return did*/
> - if (did != INVALID_DID)
> - break;
> - }
> - return did;
> -}
> -
> diff --git a/drivers/gpu/drm/amd/display/dc/gpu/divider_range.h b/drivers/gpu/drm/amd/display/dc/gpu/divider_range.h
> deleted file mode 100644
> index e53522f652cc..000000000000
> --- a/drivers/gpu/drm/amd/display/dc/gpu/divider_range.h
> +++ /dev/null
> @@ -1,62 +0,0 @@
> -/*
> - * Copyright 2012-15 Advanced Micro Devices, Inc.
> - *
> - * Permission is hereby granted, free of charge, to any person obtaining a
> - * copy of this software and associated documentation files (the "Software"),
> - * to deal in the Software without restriction, including without limitation
> - * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> - * and/or sell copies of the Software, and to permit persons to whom the
> - * Software is furnished to do so, subject to the following conditions:
> - *
> - * The above copyright notice and this permission notice shall be included in
> - * all copies or substantial portions of the Software.
> - *
> - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> - * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> - * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> - * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> - * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> - * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> - * OTHER DEALINGS IN THE SOFTWARE.
> - *
> - * Authors: AMD
> - *
> - */
> -
> -#ifndef __DAL_DIVIDER_RANGE_H__
> -#define __DAL_DIVIDER_RANGE_H__
> -
> -enum divider_error_types {
> - INVALID_DID = 0,
> - INVALID_DIVIDER = 1
> -};
> -
> -struct divider_range {
> - uint32_t div_range_start;
> - /* The end of this range of dividers.*/
> - uint32_t div_range_end;
> - /* The distance between each divider in this range.*/
> - uint32_t div_range_step;
> - /* The divider id for the lowest divider.*/
> - uint32_t did_min;
> - /* The divider id for the highest divider.*/
> - uint32_t did_max;
> -};
> -
> -bool dal_divider_range_construct(
> - struct divider_range *div_range,
> - uint32_t range_start,
> - uint32_t range_step,
> - uint32_t did_min,
> - uint32_t did_max);
> -
> -uint32_t dal_divider_range_get_divider(
> - struct divider_range *div_range,
> - uint32_t ranges_num,
> - uint32_t did);
> -uint32_t dal_divider_range_get_did(
> - struct divider_range *div_range,
> - uint32_t ranges_num,
> - uint32_t divider);
> -
> -#endif /* __DAL_DIVIDER_RANGE_H__ */
> diff --git a/drivers/gpu/drm/amd/display/dc/inc/core_types.h b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
> index f2eb8945d5c4..0418e3e02c7a 100644
> --- a/drivers/gpu/drm/amd/display/dc/inc/core_types.h
> +++ b/drivers/gpu/drm/amd/display/dc/inc/core_types.h
> @@ -188,7 +188,7 @@ void core_link_enable_stream(struct pipe_ctx *pipe_ctx);
> void core_link_disable_stream(struct pipe_ctx *pipe_ctx);
>
> /********** DAL Core*********************/
> -#include "display_clock_interface.h"
> +#include "display_clock.h"
> #include "transform.h"
>
> struct resource_pool;
> diff --git a/drivers/gpu/drm/amd/display/include/display_clock_interface.h b/drivers/gpu/drm/amd/display/dc/inc/hw/display_clock.h
> similarity index 75%
> rename from drivers/gpu/drm/amd/display/include/display_clock_interface.h
> rename to drivers/gpu/drm/amd/display/dc/inc/hw/display_clock.h
> index 53a01381c638..e163f5818dd9 100644
> --- a/drivers/gpu/drm/amd/display/include/display_clock_interface.h
> +++ b/drivers/gpu/drm/amd/display/dc/inc/hw/display_clock.h
> @@ -1,5 +1,5 @@
> /*
> - * Copyright 2012-15 Advanced Micro Devices, Inc.
> + * Copyright 2012-16 Advanced Micro Devices, Inc.
> *
> * Permission is hereby granted, free of charge, to any person obtaining a
> * copy of this software and associated documentation files (the "Software"),
> @@ -23,44 +23,39 @@
> *
> */
>
> -#ifndef __DISPLAY_CLOCK_INTERFACE_H__
> -#define __DISPLAY_CLOCK_INTERFACE_H__
> +#ifndef __DISPLAY_CLOCK_H__
> +#define __DISPLAY_CLOCK_H__
>
> #include "dm_services_types.h"
> -#include "hw_sequencer_types.h"
> -#include "grph_object_defs.h"
> -#include "signal_types.h"
>
> /* Structure containing all state-dependent clocks
> * (dependent on "enum clocks_state") */
> struct state_dependent_clocks {
> - uint32_t display_clk_khz;
> - uint32_t pixel_clk_khz;
> + int display_clk_khz;
> + int pixel_clk_khz;
> };
>
> struct display_clock {
> struct dc_context *ctx;
> const struct display_clock_funcs *funcs;
>
> - int min_display_clk_threshold_khz;
> enum dm_pp_clocks_state max_clks_state;
> enum dm_pp_clocks_state cur_min_clks_state;
> };
>
> struct display_clock_funcs {
> - void (*destroy)(struct display_clock **to_destroy);
> void (*set_clock)(struct display_clock *disp_clk,
> - uint32_t requested_clock_khz);
> + int requested_clock_khz);
> +
> enum dm_pp_clocks_state (*get_required_clocks_state)(
> struct display_clock *disp_clk,
> struct state_dependent_clocks *req_clocks);
> +
> bool (*set_min_clocks_state)(struct display_clock *disp_clk,
> enum dm_pp_clocks_state dm_pp_clocks_state);
> - uint32_t (*get_dp_ref_clk_frequency)(struct display_clock *disp_clk);
>
> -};
> -
> -void dal_display_clock_destroy(struct display_clock **to_destroy);
> + int (*get_dp_ref_clk_frequency)(struct display_clock *disp_clk);
>
> +};
>
> -#endif /* __DISPLAY_CLOCK_INTERFACE_H__ */
> +#endif /* __DISPLAY_CLOCK_H__ */
>
More information about the amd-gfx
mailing list