[PATCH 2/4] drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11.
Alex Deucher
alexdeucher at gmail.com
Wed Jun 29 16:14:10 UTC 2016
From: Rex Zhu <Rex.Zhu at amd.com>
1. Populate correct value of VDDCI voltage for SMC SAMU, VCE,
and UVD levels depending on whether VDDCi control is SVI2 or GPIO.
2. Populate SMC ACPI minimum voltage using VBIOS boot SCLK and MCLK
When static voltage is configured as VDDCI, driver still tries to program
a voltage for MM minVoltage using VDDC-VDDCI delta requirement.
minVoltage should be set as boot up voltage.
Signed-off-by: Rex Zhu <Rex.Zhu at amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
.../gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c | 101 ++++++++++++---------
1 file changed, 60 insertions(+), 41 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c
index d15584c..ec2a7ad 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/polaris10_hwmgr.c
@@ -1423,22 +1423,19 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr,
table->ACPILevel.Flags &= ~PPSMC_SWSTATE_FLAG_DC;
- if (!data->sclk_dpm_key_disabled) {
- /* Get MinVoltage and Frequency from DPM0,
- * already converted to SMC_UL */
- sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value;
- result = polaris10_get_dependency_volt_by_clk(hwmgr,
- table_info->vdd_dep_on_sclk,
- table->ACPILevel.SclkFrequency,
- &table->ACPILevel.MinVoltage, &mvdd);
- PP_ASSERT_WITH_CODE((0 == result),
- "Cannot find ACPI VDDC voltage value "
- "in Clock Dependency Table", );
- } else {
- sclk_frequency = data->vbios_boot_state.sclk_bootup_value;
- table->ACPILevel.MinVoltage =
- data->vbios_boot_state.vddc_bootup_value * VOLTAGE_SCALE;
- }
+
+ /* Get MinVoltage and Frequency from DPM0,
+ * already converted to SMC_UL */
+ sclk_frequency = data->dpm_table.sclk_table.dpm_levels[0].value;
+ result = polaris10_get_dependency_volt_by_clk(hwmgr,
+ table_info->vdd_dep_on_sclk,
+ sclk_frequency,
+ &table->ACPILevel.MinVoltage, &mvdd);
+ PP_ASSERT_WITH_CODE((0 == result),
+ "Cannot find ACPI VDDC voltage value "
+ "in Clock Dependency Table",
+ );
+
result = polaris10_calculate_sclk_params(hwmgr, sclk_frequency, &(table->ACPILevel.SclkSetting));
PP_ASSERT_WITH_CODE(result == 0, "Error retrieving Engine Clock dividers from VBIOS.", return result);
@@ -1463,24 +1460,18 @@ static int polaris10_populate_smc_acpi_level(struct pp_hwmgr *hwmgr,
CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Fcw1_frac);
CONVERT_FROM_HOST_TO_SMC_US(table->ACPILevel.SclkSetting.Sclk_ss_slew_rate);
- if (!data->mclk_dpm_key_disabled) {
- /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */
- table->MemoryACPILevel.MclkFrequency =
- data->dpm_table.mclk_table.dpm_levels[0].value;
- result = polaris10_get_dependency_volt_by_clk(hwmgr,
- table_info->vdd_dep_on_mclk,
- table->MemoryACPILevel.MclkFrequency,
- &table->MemoryACPILevel.MinVoltage, &mvdd);
- PP_ASSERT_WITH_CODE((0 == result),
- "Cannot find ACPI VDDCI voltage value "
- "in Clock Dependency Table",
- );
- } else {
- table->MemoryACPILevel.MclkFrequency =
- data->vbios_boot_state.mclk_bootup_value;
- table->MemoryACPILevel.MinVoltage =
- data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE;
- }
+
+ /* Get MinVoltage and Frequency from DPM0, already converted to SMC_UL */
+ table->MemoryACPILevel.MclkFrequency =
+ data->dpm_table.mclk_table.dpm_levels[0].value;
+ result = polaris10_get_dependency_volt_by_clk(hwmgr,
+ table_info->vdd_dep_on_mclk,
+ table->MemoryACPILevel.MclkFrequency,
+ &table->MemoryACPILevel.MinVoltage, &mvdd);
+ PP_ASSERT_WITH_CODE((0 == result),
+ "Cannot find ACPI VDDCI voltage value "
+ "in Clock Dependency Table",
+ );
us_mvdd = 0;
if ((POLARIS10_VOLTAGE_CONTROL_NONE == data->mvdd_control) ||
@@ -1525,6 +1516,7 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr,
struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
table_info->mm_dep_table;
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+ uint32_t vddci;
table->VceLevelCount = (uint8_t)(mm_table->count);
table->VceBootLevel = 0;
@@ -1534,9 +1526,18 @@ static int polaris10_populate_smc_vce_level(struct pp_hwmgr *hwmgr,
table->VceLevel[count].MinVoltage = 0;
table->VceLevel[count].MinVoltage |=
(mm_table->entries[count].vddc * VOLTAGE_SCALE) << VDDC_SHIFT;
+
+ if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control)
+ vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table),
+ mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
+ else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control)
+ vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA;
+ else
+ vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+
table->VceLevel[count].MinVoltage |=
- ((mm_table->entries[count].vddc - data->vddc_vddci_delta) *
- VOLTAGE_SCALE) << VDDCI_SHIFT;
+ (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT;
table->VceLevel[count].MinVoltage |= 1 << PHASES_SHIFT;
/*retrieve divider value for VBIOS */
@@ -1565,6 +1566,7 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr,
struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
table_info->mm_dep_table;
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+ uint32_t vddci;
table->SamuBootLevel = 0;
table->SamuLevelCount = (uint8_t)(mm_table->count);
@@ -1575,8 +1577,16 @@ static int polaris10_populate_smc_samu_level(struct pp_hwmgr *hwmgr,
table->SamuLevel[count].Frequency = mm_table->entries[count].samclock;
table->SamuLevel[count].MinVoltage |= (mm_table->entries[count].vddc *
VOLTAGE_SCALE) << VDDC_SHIFT;
- table->SamuLevel[count].MinVoltage |= ((mm_table->entries[count].vddc -
- data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control)
+ vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table),
+ mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
+ else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control)
+ vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA;
+ else
+ vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ table->SamuLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT;
table->SamuLevel[count].MinVoltage |= 1 << PHASES_SHIFT;
/* retrieve divider value for VBIOS */
@@ -1659,6 +1669,7 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr,
struct phm_ppt_v1_mm_clock_voltage_dependency_table *mm_table =
table_info->mm_dep_table;
struct polaris10_hwmgr *data = (struct polaris10_hwmgr *)(hwmgr->backend);
+ uint32_t vddci;
table->UvdLevelCount = (uint8_t)(mm_table->count);
table->UvdBootLevel = 0;
@@ -1669,8 +1680,16 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr,
table->UvdLevel[count].DclkFrequency = mm_table->entries[count].dclk;
table->UvdLevel[count].MinVoltage |= (mm_table->entries[count].vddc *
VOLTAGE_SCALE) << VDDC_SHIFT;
- table->UvdLevel[count].MinVoltage |= ((mm_table->entries[count].vddc -
- data->vddc_vddci_delta) * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ if (POLARIS10_VOLTAGE_CONTROL_BY_GPIO == data->vddci_control)
+ vddci = (uint32_t)phm_find_closest_vddci(&(data->vddci_voltage_table),
+ mm_table->entries[count].vddc - VDDC_VDDCI_DELTA);
+ else if (POLARIS10_VOLTAGE_CONTROL_BY_SVID2 == data->vddci_control)
+ vddci = mm_table->entries[count].vddc - VDDC_VDDCI_DELTA;
+ else
+ vddci = (data->vbios_boot_state.vddci_bootup_value * VOLTAGE_SCALE) << VDDCI_SHIFT;
+
+ table->UvdLevel[count].MinVoltage |= (vddci * VOLTAGE_SCALE) << VDDCI_SHIFT;
table->UvdLevel[count].MinVoltage |= 1 << PHASES_SHIFT;
/* retrieve divider value for VBIOS */
@@ -1691,8 +1710,8 @@ static int polaris10_populate_smc_uvd_level(struct pp_hwmgr *hwmgr,
CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].VclkFrequency);
CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].DclkFrequency);
CONVERT_FROM_HOST_TO_SMC_UL(table->UvdLevel[count].MinVoltage);
-
}
+
return result;
}
--
2.5.5
More information about the amd-gfx
mailing list