[PATCH 3/5] drm/amd/amdgpu: clean up gfx_v8_0_kiq_init_register()

[Tom St Denis]

Swap read/write pattern for WREG32_FIELD()

Signed-off-by: Tom St Denis <tom.stdenis at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 3c43c10d0ada..d09d69b0d096 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -4869,13 +4869,10 @@ static int gfx_v8_0_kiq_init_register(struct amdgpu_ring *ring)
 {
 	struct amdgpu_device *adev = ring->adev;
 	struct vi_mqd *mqd = ring->mqd_ptr;
-	uint32_t tmp;
 	int j;
 
 	/* disable wptr polling */
-	tmp = RREG32(mmCP_PQ_WPTR_POLL_CNTL);
-	tmp = REG_SET_FIELD(tmp, CP_PQ_WPTR_POLL_CNTL, EN, 0);
-	WREG32(mmCP_PQ_WPTR_POLL_CNTL, tmp);
+	WREG32_FIELD(CP_PQ_WPTR_POLL_CNTL, EN, 0);
 
 	WREG32(mmCP_HQD_EOP_BASE_ADDR, mqd->cp_hqd_eop_base_addr_lo);
 	WREG32(mmCP_HQD_EOP_BASE_ADDR_HI, mqd->cp_hqd_eop_base_addr_hi);
@@ -4947,11 +4944,8 @@ static int gfx_v8_0_kiq_init_register(struct amdgpu_ring *ring)
 	/* activate the queue */
 	WREG32(mmCP_HQD_ACTIVE, mqd->cp_hqd_active);
 
-	if (ring->use_doorbell) {
-		tmp = RREG32(mmCP_PQ_STATUS);
-		tmp = REG_SET_FIELD(tmp, CP_PQ_STATUS, DOORBELL_ENABLE, 1);
-		WREG32(mmCP_PQ_STATUS, tmp);
-	}
+	if (ring->use_doorbell)
+		WREG32_FIELD(CP_PQ_STATUS, DOORBELL_ENABLE, 1);
 
 	return 0;
 }
-- 
2.12.0