[PATCH xf86-video-amdgpu] modesetting: re-set the crtc's mode when link-status goes BAD

[Michel Dänzer]

From: Martin Peres <martin.peres at linux.intel.com>

Despite all the careful planning of the kernel, a link may become
insufficient to handle the currently-set mode. At this point, the
kernel should mark this particular configuration as being broken
and potentially prune the mode before setting the offending connector's
link-status to BAD and send the userspace a hotplug event. This may
happen right after a modeset or later on.

Upon receiving a hot-plug event, we iterate through the connectors to
re-apply the currently-set mode on all the connectors that have a
link-status property set to BAD. The kernel may be able to get the
link to work by dropping to using a lower link bpp (with the same
display bpp). However, the modeset may fail if the kernel has pruned
the mode, so to make users aware of this problem a warning is outputed
in the logs to warn about having a potentially-black display.

This patch does not modify the current behaviour of always propagating
the events to the randr clients. This allows desktop environments to
re-probe the connectors and select a new resolution based on the new
(currated) mode list if a mode disapeared. This behaviour is expected in
order to pass the Display Port compliance tests.

(Ported from xserver commit bcee1b76aa0db8525b491485e90b8740763d7de6)

[ Michel: Bump libdrm dependency to >= 2.4.78 for
  DRM_MODE_LINK_STATUS_BAD ]
(Ported from radeon commit 0472a605e0ec8fec1892bbc3a84698b7ef9c5296)

Signed-off-by: Michel Dänzer <michel.daenzer at amd.com>
---
 configure.ac          |  2 +-
 src/drmmode_display.c | 43 +++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 44 insertions(+), 1 deletion(-)

diff --git a/configure.ac b/configure.ac
index 0ff2bdfaa..6d7cee476 100644
--- a/configure.ac
+++ b/configure.ac
@@ -70,7 +70,7 @@ XORG_DRIVER_CHECK_EXT(XV, videoproto)
 XORG_DRIVER_CHECK_EXT(DPMSExtension, xextproto)
 
 # Checks for libraries.
-PKG_CHECK_MODULES(LIBDRM, [libdrm >= 2.4.72])
+PKG_CHECK_MODULES(LIBDRM, [libdrm >= 2.4.78])
 PKG_CHECK_MODULES(LIBDRM_AMDGPU, [libdrm_amdgpu >= 2.4.72])
 PKG_CHECK_MODULES(GBM, [gbm])
 
diff --git a/src/drmmode_display.c b/src/drmmode_display.c
index ad3325be6..17efde8e8 100644
--- a/src/drmmode_display.c
+++ b/src/drmmode_display.c
@@ -2627,6 +2627,49 @@ amdgpu_mode_hotplug(ScrnInfoPtr scrn, drmmode_ptr drmmode)
 	Bool changed = FALSE;
 	int num_dvi = 0, num_hdmi = 0;
 
+	/* Try to re-set the mode on all the connectors with a BAD link-state:
+	 * This may happen if a link degrades and a new modeset is necessary, using
+	 * different link-training parameters. If the kernel found that the current
+	 * mode is not achievable anymore, it should have pruned the mode before
+	 * sending the hotplug event. Try to re-set the currently-set mode to keep
+	 * the display alive, this will fail if the mode has been pruned.
+	 * In any case, we will send randr events for the Desktop Environment to
+	 * deal with it, if it wants to.
+	 */
+	for (i = 0; i < config->num_output; i++) {
+		xf86OutputPtr output = config->output[i];
+		drmmode_output_private_ptr drmmode_output = output->driver_private;
+		uint32_t con_id = drmmode_output->mode_output->connector_id;
+		drmModeConnectorPtr koutput;
+
+		/* Get an updated view of the properties for the current connector and
+		 * look for the link-status property
+		 */
+		koutput = drmModeGetConnectorCurrent(pAMDGPUEnt->fd, con_id);
+		for (j = 0; koutput && j < koutput->count_props; j++) {
+			drmModePropertyPtr props;
+			props = drmModeGetProperty(pAMDGPUEnt->fd, koutput->props[j]);
+			if (props && props->flags & DRM_MODE_PROP_ENUM &&
+			    !strcmp(props->name, "link-status") &&
+			    koutput->prop_values[j] == DRM_MODE_LINK_STATUS_BAD) {
+				xf86CrtcPtr crtc = output->crtc;
+				if (!crtc)
+					continue;
+
+				/* the connector got a link failure, re-set the current mode */
+				drmmode_set_mode_major(crtc, &crtc->mode, crtc->rotation,
+						       crtc->x, crtc->y);
+
+				xf86DrvMsg(scrn->scrnIndex, X_WARNING,
+					   "hotplug event: connector %u's link-state is BAD, "
+					   "tried resetting the current mode. You may be left "
+					   "with a black screen if this fails...\n", con_id);
+			}
+			drmModeFreeProperty(props);
+		}
+		drmModeFreeConnector(koutput);
+	}
+
 	mode_res = drmModeGetResources(pAMDGPUEnt->fd);
 	if (!mode_res)
 		goto out;
-- 
2.14.1