[PATCH 22/37] drm/amdkfd: Add perf counters to topology

Alex Deucher alexdeucher at gmail.com
Mon Dec 11 15:47:46 UTC 2017


On Mon, Dec 11, 2017 at 10:23 AM, Oded Gabbay <oded.gabbay at gmail.com> wrote:
> On Sat, Dec 9, 2017 at 6:09 AM, Felix Kuehling <Felix.Kuehling at amd.com> wrote:
>> From: Amber Lin <Amber.Lin at amd.com>
>>
>> For hardware blocks whose performance counters are accessed via MMIO
>> registers, KFD provides the support for those privileged blocks. IOMMU is
>> one of those privileged blocks. Most performance counter properties
>> required by Thunk are available at /sys/bus/event_source/devices/amd_iommu.
>>  This patch adds properties to topology in KFD sysfs for information not
>> available in /sys/bus/event_source/devices/amd_iommu. They are shown at
>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as
>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e.
>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent.
>> For dGPUs, who don't have IOMMU, nothing appears under
>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf.
>
> I don't feel comfortable with this patch. It seems to me you didn't
> have anywhere to put these counters so you just stuck them in a place
> the thunk already reads because it was "convenient" for you to do it.
> But, as you point out in a comment later, these counters have nothing
> to do with topology.
> So this just feels wrong and I would like to:
>
> a. get additional opinions on it. Christian ? Alex ? What do you think
> ? How the GPU's GFX counters are exposed ?

They are handled as part of the command stream and exposed via OpenGL
extensions.

> b. Ask why not use IOCTL to get the counters ?

I'm not sure that is really any better.

>
> btw, I tried to search for other drivers that do this (expose perf
> counters in sysfs) and didn't find any (it wasn't an exhaustive search
> so I may have missed).

There is the perf subsystem, but I'm not sure how well it works for
device counters and tying the sampling to events and such.

Alex

>
> Thanks,
> Oded
>
>
>
>
>>
>> Signed-off-by: Amber Lin <Amber.Lin at amd.com>
>> Signed-off-by: Kent Russell <kent.russell at amd.com>
>> Signed-off-by: Felix Kuehling <Felix.Kuehling at amd.com>
>> ---
>>  drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 116 +++++++++++++++++++++++++++++-
>>  drivers/gpu/drm/amd/amdkfd/kfd_topology.h |  13 ++++
>>  2 files changed, 127 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>> index 7fe7ee0..52d20f5 100644
>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>> @@ -104,6 +104,7 @@ static void kfd_release_topology_device(struct kfd_topology_device *dev)
>>         struct kfd_mem_properties *mem;
>>         struct kfd_cache_properties *cache;
>>         struct kfd_iolink_properties *iolink;
>> +       struct kfd_perf_properties *perf;
>>
>>         list_del(&dev->list);
>>
>> @@ -128,6 +129,13 @@ static void kfd_release_topology_device(struct kfd_topology_device *dev)
>>                 kfree(iolink);
>>         }
>>
>> +       while (dev->perf_props.next != &dev->perf_props) {
>> +               perf = container_of(dev->perf_props.next,
>> +                               struct kfd_perf_properties, list);
>> +               list_del(&perf->list);
>> +               kfree(perf);
>> +       }
>> +
>>         kfree(dev);
>>  }
>>
>> @@ -162,6 +170,7 @@ struct kfd_topology_device *kfd_create_topology_device(
>>         INIT_LIST_HEAD(&dev->mem_props);
>>         INIT_LIST_HEAD(&dev->cache_props);
>>         INIT_LIST_HEAD(&dev->io_link_props);
>> +       INIT_LIST_HEAD(&dev->perf_props);
>>
>>         list_add_tail(&dev->list, device_list);
>>
>> @@ -328,6 +337,39 @@ static struct kobj_type cache_type = {
>>         .sysfs_ops = &cache_ops,
>>  };
>>
>> +/****** Sysfs of Performance Counters ******/
>> +
>> +struct kfd_perf_attr {
>> +       struct kobj_attribute attr;
>> +       uint32_t data;
>> +};
>> +
>> +static ssize_t perf_show(struct kobject *kobj, struct kobj_attribute *attrs,
>> +                       char *buf)
>> +{
>> +       struct kfd_perf_attr *attr;
>> +
>> +       buf[0] = 0;
>> +       attr = container_of(attrs, struct kfd_perf_attr, attr);
>> +       if (!attr->data) /* invalid data for PMC */
>> +               return 0;
>> +       else
>> +               return sysfs_show_32bit_val(buf, attr->data);
>> +}
>> +
>> +#define KFD_PERF_DESC(_name, _data)                    \
>> +{                                                      \
>> +       .attr  = __ATTR(_name, 0444, perf_show, NULL),  \
>> +       .data = _data,                                  \
>> +}
>> +
>> +static struct kfd_perf_attr perf_attr_iommu[] = {
>> +       KFD_PERF_DESC(max_concurrent, 0),
>> +       KFD_PERF_DESC(num_counters, 0),
>> +       KFD_PERF_DESC(counter_ids, 0),
>> +};
>> +/****************************************/
>> +
>>  static ssize_t node_show(struct kobject *kobj, struct attribute *attr,
>>                 char *buffer)
>>  {
>> @@ -452,6 +494,7 @@ static void kfd_remove_sysfs_node_entry(struct kfd_topology_device *dev)
>>         struct kfd_iolink_properties *iolink;
>>         struct kfd_cache_properties *cache;
>>         struct kfd_mem_properties *mem;
>> +       struct kfd_perf_properties *perf;
>>
>>         if (dev->kobj_iolink) {
>>                 list_for_each_entry(iolink, &dev->io_link_props, list)
>> @@ -488,6 +531,16 @@ static void kfd_remove_sysfs_node_entry(struct kfd_topology_device *dev)
>>                 dev->kobj_mem = NULL;
>>         }
>>
>> +       if (dev->kobj_perf) {
>> +               list_for_each_entry(perf, &dev->perf_props, list) {
>> +                       kfree(perf->attr_group);
>> +                       perf->attr_group = NULL;
>> +               }
>> +               kobject_del(dev->kobj_perf);
>> +               kobject_put(dev->kobj_perf);
>> +               dev->kobj_perf = NULL;
>> +       }
>> +
>>         if (dev->kobj_node) {
>>                 sysfs_remove_file(dev->kobj_node, &dev->attr_gpuid);
>>                 sysfs_remove_file(dev->kobj_node, &dev->attr_name);
>> @@ -504,8 +557,10 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>         struct kfd_iolink_properties *iolink;
>>         struct kfd_cache_properties *cache;
>>         struct kfd_mem_properties *mem;
>> +       struct kfd_perf_properties *perf;
>>         int ret;
>> -       uint32_t i;
>> +       uint32_t i, num_attrs;
>> +       struct attribute **attrs;
>>
>>         if (WARN_ON(dev->kobj_node))
>>                 return -EEXIST;
>> @@ -534,6 +589,10 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>         if (!dev->kobj_iolink)
>>                 return -ENOMEM;
>>
>> +       dev->kobj_perf = kobject_create_and_add("perf", dev->kobj_node);
>> +       if (!dev->kobj_perf)
>> +               return -ENOMEM;
>> +
>>         /*
>>          * Creating sysfs files for node properties
>>          */
>> @@ -611,7 +670,33 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>                 if (ret < 0)
>>                         return ret;
>>                 i++;
>> -}
>> +       }
>> +
>> +       /* All hardware blocks have the same number of attributes. */
>> +       num_attrs = sizeof(perf_attr_iommu)/sizeof(struct kfd_perf_attr);
>> +       list_for_each_entry(perf, &dev->perf_props, list) {
>> +               perf->attr_group = kzalloc(sizeof(struct kfd_perf_attr)
>> +                       * num_attrs + sizeof(struct attribute_group),
>> +                       GFP_KERNEL);
>> +               if (!perf->attr_group)
>> +                       return -ENOMEM;
>> +
>> +               attrs = (struct attribute **)(perf->attr_group + 1);
>> +               if (!strcmp(perf->block_name, "iommu")) {
>> +               /* Information of IOMMU's num_counters and counter_ids is shown
>> +                * under /sys/bus/event_source/devices/amd_iommu. We don't
>> +                * duplicate here.
>> +                */
>> +                       perf_attr_iommu[0].data = perf->max_concurrent;
>> +                       for (i = 0; i < num_attrs; i++)
>> +                               attrs[i] = &perf_attr_iommu[i].attr.attr;
>> +               }
>> +               perf->attr_group->name = perf->block_name;
>> +               perf->attr_group->attrs = attrs;
>> +               ret = sysfs_create_group(dev->kobj_perf, perf->attr_group);
>> +               if (ret < 0)
>> +                       return ret;
>> +       }
>>
>>         return 0;
>>  }
>> @@ -778,6 +863,29 @@ static void find_system_memory(const struct dmi_header *dm,
>>                 }
>>         }
>>  }
>> +
>> +/*
>> + * Performance counters information is not part of CRAT but we would like to
>> + * put them in the sysfs under topology directory for Thunk to get the data.
>> + * This function is called before updating the sysfs.
>> + */
>> +static int kfd_add_perf_to_topology(struct kfd_topology_device *kdev)
>> +{
>> +       struct kfd_perf_properties *props;
>> +
>> +       if (amd_iommu_pc_supported()) {
>> +               props = kfd_alloc_struct(props);
>> +               if (!props)
>> +                       return -ENOMEM;
>> +               strcpy(props->block_name, "iommu");
>> +               props->max_concurrent = amd_iommu_pc_get_max_banks(0) *
>> +                       amd_iommu_pc_get_max_counters(0); /* assume one iommu */
>> +               list_add_tail(&props->list, &kdev->perf_props);
>> +       }
>> +
>> +       return 0;
>> +}
>> +
>>  /* kfd_add_non_crat_information - Add information that is not currently
>>   *     defined in CRAT but is necessary for KFD topology
>>   * @dev - topology device to which addition info is added
>> @@ -860,6 +968,10 @@ int kfd_topology_init(void)
>>                 }
>>         }
>>
>> +       kdev = list_first_entry(&temp_topology_device_list,
>> +                               struct kfd_topology_device, list);
>> +       kfd_add_perf_to_topology(kdev);
>> +
>>         down_write(&topology_lock);
>>         kfd_topology_update_device_list(&temp_topology_device_list,
>>                                         &topology_device_list);
>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>> index 55de56f..b9f3142 100644
>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>> @@ -134,6 +134,13 @@ struct kfd_iolink_properties {
>>         struct attribute        attr;
>>  };
>>
>> +struct kfd_perf_properties {
>> +       struct list_head        list;
>> +       char                    block_name[16];
>> +       uint32_t                max_concurrent;
>> +       struct attribute_group  *attr_group;
>> +};
>> +
>>  struct kfd_topology_device {
>>         struct list_head                list;
>>         uint32_t                        gpu_id;
>> @@ -144,11 +151,13 @@ struct kfd_topology_device {
>>         struct list_head                cache_props;
>>         uint32_t                        io_link_count;
>>         struct list_head                io_link_props;
>> +       struct list_head                perf_props;
>>         struct kfd_dev                  *gpu;
>>         struct kobject                  *kobj_node;
>>         struct kobject                  *kobj_mem;
>>         struct kobject                  *kobj_cache;
>>         struct kobject                  *kobj_iolink;
>> +       struct kobject                  *kobj_perf;
>>         struct attribute                attr_gpuid;
>>         struct attribute                attr_name;
>>         struct attribute                attr_props;
>> @@ -173,4 +182,8 @@ struct kfd_topology_device *kfd_create_topology_device(
>>                 struct list_head *device_list);
>>  void kfd_release_topology_device_list(struct list_head *device_list);
>>
>> +extern bool amd_iommu_pc_supported(void);
>> +extern u8 amd_iommu_pc_get_max_banks(u16 devid);
>> +extern u8 amd_iommu_pc_get_max_counters(u16 devid);
>> +
>>  #endif /* __KFD_TOPOLOGY_H__ */
>> --
>> 2.7.4
>>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx


More information about the amd-gfx mailing list