[PATCH 22/37] drm/amdkfd: Add perf counters to topology

Oded Gabbay oded.gabbay at gmail.com
Tue Dec 12 08:15:15 UTC 2017


On Mon, Dec 11, 2017 at 9:54 PM, Felix Kuehling <felix.kuehling at amd.com> wrote:
> On 2017-12-11 10:23 AM, Oded Gabbay wrote:
>> On Sat, Dec 9, 2017 at 6:09 AM, Felix Kuehling <Felix.Kuehling at amd.com> wrote:
>>> From: Amber Lin <Amber.Lin at amd.com>
>>>
>>> For hardware blocks whose performance counters are accessed via MMIO
>>> registers, KFD provides the support for those privileged blocks. IOMMU is
>>> one of those privileged blocks. Most performance counter properties
>>> required by Thunk are available at /sys/bus/event_source/devices/amd_iommu.
>>>  This patch adds properties to topology in KFD sysfs for information not
>>> available in /sys/bus/event_source/devices/amd_iommu. They are shown at
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/ formatted as
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/<block>/<property>, i.e.
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf/iommu/max_concurrent.
>>> For dGPUs, who don't have IOMMU, nothing appears under
>>> /sys/devices/virtual/kfd/kfd/topology/nodes/0/perf.
>> I don't feel comfortable with this patch. It seems to me you didn't
>> have anywhere to put these counters so you just stuck them in a place
>> the thunk already reads because it was "convenient" for you to do it.
>> But, as you point out in a comment later, these counters have nothing
>> to do with topology.
>> So this just feels wrong and I would like to:
>>
>> a. get additional opinions on it. Christian ? Alex ? What do you think
>> ? How the GPU's GFX counters are exposed ?
>> b. Ask why not use IOCTL to get the counters ?
>
> I see the performance counter information similar to other information
> provided in the topology, such as memory, caches, CUs, etc. That's why
> it makes sense for me to report it in the topology.
>
> If this is controversial, I can drop the patch for now. It's not
> critically needed for enabling dGPU support.
>
> Regards,
>   Felix

Felix,
Is the perf counter information part of the snapshot that the thunk
takes before opening the device, or is it constantly being sampled ?
If its a oneshot thing, than I think that's somehow acceptable.

Oded

>
>>
>> btw, I tried to search for other drivers that do this (expose perf
>> counters in sysfs) and didn't find any (it wasn't an exhaustive search
>> so I may have missed).
>>
>> Thanks,
>> Oded
>>
>>
>>
>>
>>> Signed-off-by: Amber Lin <Amber.Lin at amd.com>
>>> Signed-off-by: Kent Russell <kent.russell at amd.com>
>>> Signed-off-by: Felix Kuehling <Felix.Kuehling at amd.com>
>>> ---
>>>  drivers/gpu/drm/amd/amdkfd/kfd_topology.c | 116 +++++++++++++++++++++++++++++-
>>>  drivers/gpu/drm/amd/amdkfd/kfd_topology.h |  13 ++++
>>>  2 files changed, 127 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>>> index 7fe7ee0..52d20f5 100644
>>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.c
>>> @@ -104,6 +104,7 @@ static void kfd_release_topology_device(struct kfd_topology_device *dev)
>>>         struct kfd_mem_properties *mem;
>>>         struct kfd_cache_properties *cache;
>>>         struct kfd_iolink_properties *iolink;
>>> +       struct kfd_perf_properties *perf;
>>>
>>>         list_del(&dev->list);
>>>
>>> @@ -128,6 +129,13 @@ static void kfd_release_topology_device(struct kfd_topology_device *dev)
>>>                 kfree(iolink);
>>>         }
>>>
>>> +       while (dev->perf_props.next != &dev->perf_props) {
>>> +               perf = container_of(dev->perf_props.next,
>>> +                               struct kfd_perf_properties, list);
>>> +               list_del(&perf->list);
>>> +               kfree(perf);
>>> +       }
>>> +
>>>         kfree(dev);
>>>  }
>>>
>>> @@ -162,6 +170,7 @@ struct kfd_topology_device *kfd_create_topology_device(
>>>         INIT_LIST_HEAD(&dev->mem_props);
>>>         INIT_LIST_HEAD(&dev->cache_props);
>>>         INIT_LIST_HEAD(&dev->io_link_props);
>>> +       INIT_LIST_HEAD(&dev->perf_props);
>>>
>>>         list_add_tail(&dev->list, device_list);
>>>
>>> @@ -328,6 +337,39 @@ static struct kobj_type cache_type = {
>>>         .sysfs_ops = &cache_ops,
>>>  };
>>>
>>> +/****** Sysfs of Performance Counters ******/
>>> +
>>> +struct kfd_perf_attr {
>>> +       struct kobj_attribute attr;
>>> +       uint32_t data;
>>> +};
>>> +
>>> +static ssize_t perf_show(struct kobject *kobj, struct kobj_attribute *attrs,
>>> +                       char *buf)
>>> +{
>>> +       struct kfd_perf_attr *attr;
>>> +
>>> +       buf[0] = 0;
>>> +       attr = container_of(attrs, struct kfd_perf_attr, attr);
>>> +       if (!attr->data) /* invalid data for PMC */
>>> +               return 0;
>>> +       else
>>> +               return sysfs_show_32bit_val(buf, attr->data);
>>> +}
>>> +
>>> +#define KFD_PERF_DESC(_name, _data)                    \
>>> +{                                                      \
>>> +       .attr  = __ATTR(_name, 0444, perf_show, NULL),  \
>>> +       .data = _data,                                  \
>>> +}
>>> +
>>> +static struct kfd_perf_attr perf_attr_iommu[] = {
>>> +       KFD_PERF_DESC(max_concurrent, 0),
>>> +       KFD_PERF_DESC(num_counters, 0),
>>> +       KFD_PERF_DESC(counter_ids, 0),
>>> +};
>>> +/****************************************/
>>> +
>>>  static ssize_t node_show(struct kobject *kobj, struct attribute *attr,
>>>                 char *buffer)
>>>  {
>>> @@ -452,6 +494,7 @@ static void kfd_remove_sysfs_node_entry(struct kfd_topology_device *dev)
>>>         struct kfd_iolink_properties *iolink;
>>>         struct kfd_cache_properties *cache;
>>>         struct kfd_mem_properties *mem;
>>> +       struct kfd_perf_properties *perf;
>>>
>>>         if (dev->kobj_iolink) {
>>>                 list_for_each_entry(iolink, &dev->io_link_props, list)
>>> @@ -488,6 +531,16 @@ static void kfd_remove_sysfs_node_entry(struct kfd_topology_device *dev)
>>>                 dev->kobj_mem = NULL;
>>>         }
>>>
>>> +       if (dev->kobj_perf) {
>>> +               list_for_each_entry(perf, &dev->perf_props, list) {
>>> +                       kfree(perf->attr_group);
>>> +                       perf->attr_group = NULL;
>>> +               }
>>> +               kobject_del(dev->kobj_perf);
>>> +               kobject_put(dev->kobj_perf);
>>> +               dev->kobj_perf = NULL;
>>> +       }
>>> +
>>>         if (dev->kobj_node) {
>>>                 sysfs_remove_file(dev->kobj_node, &dev->attr_gpuid);
>>>                 sysfs_remove_file(dev->kobj_node, &dev->attr_name);
>>> @@ -504,8 +557,10 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>>         struct kfd_iolink_properties *iolink;
>>>         struct kfd_cache_properties *cache;
>>>         struct kfd_mem_properties *mem;
>>> +       struct kfd_perf_properties *perf;
>>>         int ret;
>>> -       uint32_t i;
>>> +       uint32_t i, num_attrs;
>>> +       struct attribute **attrs;
>>>
>>>         if (WARN_ON(dev->kobj_node))
>>>                 return -EEXIST;
>>> @@ -534,6 +589,10 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>>         if (!dev->kobj_iolink)
>>>                 return -ENOMEM;
>>>
>>> +       dev->kobj_perf = kobject_create_and_add("perf", dev->kobj_node);
>>> +       if (!dev->kobj_perf)
>>> +               return -ENOMEM;
>>> +
>>>         /*
>>>          * Creating sysfs files for node properties
>>>          */
>>> @@ -611,7 +670,33 @@ static int kfd_build_sysfs_node_entry(struct kfd_topology_device *dev,
>>>                 if (ret < 0)
>>>                         return ret;
>>>                 i++;
>>> -}
>>> +       }
>>> +
>>> +       /* All hardware blocks have the same number of attributes. */
>>> +       num_attrs = sizeof(perf_attr_iommu)/sizeof(struct kfd_perf_attr);
>>> +       list_for_each_entry(perf, &dev->perf_props, list) {
>>> +               perf->attr_group = kzalloc(sizeof(struct kfd_perf_attr)
>>> +                       * num_attrs + sizeof(struct attribute_group),
>>> +                       GFP_KERNEL);
>>> +               if (!perf->attr_group)
>>> +                       return -ENOMEM;
>>> +
>>> +               attrs = (struct attribute **)(perf->attr_group + 1);
>>> +               if (!strcmp(perf->block_name, "iommu")) {
>>> +               /* Information of IOMMU's num_counters and counter_ids is shown
>>> +                * under /sys/bus/event_source/devices/amd_iommu. We don't
>>> +                * duplicate here.
>>> +                */
>>> +                       perf_attr_iommu[0].data = perf->max_concurrent;
>>> +                       for (i = 0; i < num_attrs; i++)
>>> +                               attrs[i] = &perf_attr_iommu[i].attr.attr;
>>> +               }
>>> +               perf->attr_group->name = perf->block_name;
>>> +               perf->attr_group->attrs = attrs;
>>> +               ret = sysfs_create_group(dev->kobj_perf, perf->attr_group);
>>> +               if (ret < 0)
>>> +                       return ret;
>>> +       }
>>>
>>>         return 0;
>>>  }
>>> @@ -778,6 +863,29 @@ static void find_system_memory(const struct dmi_header *dm,
>>>                 }
>>>         }
>>>  }
>>> +
>>> +/*
>>> + * Performance counters information is not part of CRAT but we would like to
>>> + * put them in the sysfs under topology directory for Thunk to get the data.
>>> + * This function is called before updating the sysfs.
>>> + */
>>> +static int kfd_add_perf_to_topology(struct kfd_topology_device *kdev)
>>> +{
>>> +       struct kfd_perf_properties *props;
>>> +
>>> +       if (amd_iommu_pc_supported()) {
>>> +               props = kfd_alloc_struct(props);
>>> +               if (!props)
>>> +                       return -ENOMEM;
>>> +               strcpy(props->block_name, "iommu");
>>> +               props->max_concurrent = amd_iommu_pc_get_max_banks(0) *
>>> +                       amd_iommu_pc_get_max_counters(0); /* assume one iommu */
>>> +               list_add_tail(&props->list, &kdev->perf_props);
>>> +       }
>>> +
>>> +       return 0;
>>> +}
>>> +
>>>  /* kfd_add_non_crat_information - Add information that is not currently
>>>   *     defined in CRAT but is necessary for KFD topology
>>>   * @dev - topology device to which addition info is added
>>> @@ -860,6 +968,10 @@ int kfd_topology_init(void)
>>>                 }
>>>         }
>>>
>>> +       kdev = list_first_entry(&temp_topology_device_list,
>>> +                               struct kfd_topology_device, list);
>>> +       kfd_add_perf_to_topology(kdev);
>>> +
>>>         down_write(&topology_lock);
>>>         kfd_topology_update_device_list(&temp_topology_device_list,
>>>                                         &topology_device_list);
>>> diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>>> index 55de56f..b9f3142 100644
>>> --- a/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>>> +++ b/drivers/gpu/drm/amd/amdkfd/kfd_topology.h
>>> @@ -134,6 +134,13 @@ struct kfd_iolink_properties {
>>>         struct attribute        attr;
>>>  };
>>>
>>> +struct kfd_perf_properties {
>>> +       struct list_head        list;
>>> +       char                    block_name[16];
>>> +       uint32_t                max_concurrent;
>>> +       struct attribute_group  *attr_group;
>>> +};
>>> +
>>>  struct kfd_topology_device {
>>>         struct list_head                list;
>>>         uint32_t                        gpu_id;
>>> @@ -144,11 +151,13 @@ struct kfd_topology_device {
>>>         struct list_head                cache_props;
>>>         uint32_t                        io_link_count;
>>>         struct list_head                io_link_props;
>>> +       struct list_head                perf_props;
>>>         struct kfd_dev                  *gpu;
>>>         struct kobject                  *kobj_node;
>>>         struct kobject                  *kobj_mem;
>>>         struct kobject                  *kobj_cache;
>>>         struct kobject                  *kobj_iolink;
>>> +       struct kobject                  *kobj_perf;
>>>         struct attribute                attr_gpuid;
>>>         struct attribute                attr_name;
>>>         struct attribute                attr_props;
>>> @@ -173,4 +182,8 @@ struct kfd_topology_device *kfd_create_topology_device(
>>>                 struct list_head *device_list);
>>>  void kfd_release_topology_device_list(struct list_head *device_list);
>>>
>>> +extern bool amd_iommu_pc_supported(void);
>>> +extern u8 amd_iommu_pc_get_max_banks(u16 devid);
>>> +extern u8 amd_iommu_pc_get_max_counters(u16 devid);
>>> +
>>>  #endif /* __KFD_TOPOLOGY_H__ */
>>> --
>>> 2.7.4
>>>
>


More information about the amd-gfx mailing list