[PATCH 12/27] drm/amd/display: remove disable_clk_gate debug flag for DCN
Harry Wentland
harry.wentland at amd.com
Fri Jun 9 20:11:25 UTC 2017
From: Hersen Wu <hersenxs.wu at amd.com>
Change-Id: I6143202c8b6c3c730c098fc4cabcbc89d3cf8908
Signed-off-by: Hersen Wu <hersenxs.wu at amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng at amd.com>
Acked-by: Harry Wentland <Harry.Wentland at amd.com>
---
.../drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 30 ----------------------
.../gpu/drm/amd/display/dc/dcn10/dcn10_resource.c | 1 -
2 files changed, 31 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 877e2b6a7dd5..0e677f9db96a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -397,19 +397,6 @@ static void enable_power_gating_plane(
HWSEQ_REG_UPDATE(DOMAIN3_PG_CONFIG, DOMAIN3_POWER_FORCEON, force_on);
HWSEQ_REG_UPDATE(DOMAIN5_PG_CONFIG, DOMAIN5_POWER_FORCEON, force_on);
HWSEQ_REG_UPDATE(DOMAIN7_PG_CONFIG, DOMAIN7_POWER_FORCEON, force_on);
-
- if (ctx->dc->debug.disable_clock_gate) {
- /* probably better to just write entire register to 0xffff to
- * ensure all clock gating is disabled
- */
- HWSEQ_REG_UPDATE_3(DCCG_GATE_DISABLE_CNTL,
- DISPCLK_R_DCCG_GATE_DISABLE, 1,
- DPREFCLK_R_DCCG_GATE_DISABLE, 1,
- REFCLK_R_DIG_GATE_DISABLE, 1);
- HWSEQ_REG_UPDATE(DCFCLK_CNTL,
- DCFCLK_GATE_DIS, 1);
- }
-
}
static void dpp_pg_control(
@@ -513,29 +500,12 @@ static void power_on_plane(
{
uint32_t inst_offset = 0;
- /* disable clock power gating */
-
- /* DCCG_GATE_DISABLE_CNTL only has one instance */
- if (ctx->dc->debug.disable_clock_gate) {
- HWSEQ_REG_UPDATE_2(DCCG_GATE_DISABLE_CNTL,
- DISPCLK_DCCG_GATE_DISABLE, 1,
- DPPCLK_GATE_DISABLE, 1);
- /* DCFCLK_CNTL only has one instance */
- HWSEQ_REG_UPDATE(DCFCLK_CNTL,
- DCFCLK_GATE_DIS, 1);
- }
-
HWSEQ_REG_SET(DC_IP_REQUEST_CNTL,
IP_REQUEST_EN, 1);
dpp_pg_control(ctx, plane_id, true);
hubp_pg_control(ctx, plane_id, true);
HWSEQ_REG_SET(DC_IP_REQUEST_CNTL,
IP_REQUEST_EN, 0);
-
- if (ctx->dc->debug.disable_clock_gate) {
- HWSEQ_REG_UPDATE(DCCG_GATE_DISABLE_CNTL,
- DISPCLK_DCCG_GATE_DISABLE, 0);
- }
}
/* fully check bios enabledisplaypowergating table. dal only need dce init
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
index 660cb43fd3bc..e527d10b3e1f 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_resource.c
@@ -438,7 +438,6 @@ static const struct dc_debug debug_defaults_drv = {
};
static const struct dc_debug debug_defaults_diags = {
- .disable_clock_gate = true,
.disable_dmcu = true,
.force_abm_enable = false,
.timing_trace = true,
--
2.11.0
More information about the amd-gfx
mailing list