[PATCH 000/100] Add Vega10 Support

[Jan Ziak]

On Mon, Mar 20, 2017 at 10:41 PM, Alex Deucher <alexdeucher at gmail.com>
wrote:

> On Mon, Mar 20, 2017 at 5:36 PM, Jan Ziak <0xe2.0x9a.0x9b at gmail.com>
> wrote:
> > Hi
> >
> > https://cgit.freedesktop.org/~agd5f/linux/plain/drivers/gpu/
> drm/amd/include/asic_reg/vega10/NBIO/nbio_6_1_sh_mask.
> h?h=amd-staging-4.9&id=9555ef0ba926df25d9a637d0ea21bc0d231c21d2
> >
> > The file nbio_6_1_sh_mask.h is uncompressed. It consists from 133884
> lines.
> > Only generated C/C++ code will be able to utilize the content of such a
> file
> > efficiently. All hand-written codes combined will be able to utilize
> about
> > 1% of the file.
> >
> > Is there a reason why nbio_6_1_sh_mask.h is huge?
>
> That IP block contains a lot of registers.  The idea is to open source
> as much IP as possible to facilitate debugging, new features, etc.
>
> Alex
>

[This email contains long/wide lines and should be viewed on a sufficiently
wide screen]

For example if I open the file in vim and go to line 66952:

#define DWC_E12MP_PHY_X4_NS_X4_1_LANE1_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
0x9

Then abstracting away some of the digits used in the defined identifier and
using egrep:

$ egrep
"\<DWC_E12MP_PHY_X._NS_X._._LANE._DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_.__DTB_SEL__SHIFT\>"
nbio_6_1_sh_mask.h
#define
DWC_E12MP_PHY_X4_NS_X4_0_LANE0_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_0_LANE1_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_0_LANE2_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_0_LANE3_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_0_LANEX_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_1_LANE0_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_1_LANE1_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_1_LANE2_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_1_LANE3_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_1_LANEX_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_2_LANE0_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_2_LANE1_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_2_LANE2_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_2_LANE3_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_2_LANEX_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_3_LANE0_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_3_LANE1_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_3_LANE2_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_3_LANE3_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9
#define
DWC_E12MP_PHY_X4_NS_X4_3_LANEX_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_1__DTB_SEL__SHIFT
                       0x9

The egrep command produced 20 lines.

Instead of the many #define directives, it is a possibility to define
functions such as:

int
DWC_E12MP_PHY_Xa_NS_Xb_c_LANEd_DIG_RX_VCOCAL_RX_VCO_CAL_CTRL_e__DTB_SEL__SHIFT(int
a, int b, int c, int d, int e) __attribute__((pure));

I suppose the file nbio_6_1_sh_mask.h is the output of a tool (it is a
generated file). It is an option to modify the tool to output C functions
with proper input guards instead of #define directives.

Jan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20170320/03aafe0e/attachment-0001.html>