[PATCH 056/117] drm/amdgpu: init sdma power gating for raven
Alex Deucher
alexdeucher at gmail.com
Wed May 10 18:46:47 UTC 2017
From: Huang Rui <ray.huang at amd.com>
Initialize sdma for powergating.
Signed-off-by: Huang Rui <ray.huang at amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang at amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c | 48 +++++++++++++++++++++++++++++++++-
1 file changed, 47 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
index 2afcadb..3d24e50 100644
--- a/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/sdma_v4_0.c
@@ -35,6 +35,7 @@
#include "vega10/MMHUB/mmhub_1_0_offset.h"
#include "vega10/MMHUB/mmhub_1_0_sh_mask.h"
#include "vega10/HDP/hdp_4_0_offset.h"
+#include "raven1/SDMA0/sdma0_4_1_default.h"
#include "soc15_common.h"
#include "soc15.h"
@@ -44,6 +45,9 @@ MODULE_FIRMWARE("amdgpu/vega10_sdma.bin");
MODULE_FIRMWARE("amdgpu/vega10_sdma1.bin");
MODULE_FIRMWARE("amdgpu/raven_sdma.bin");
+#define SDMA0_POWER_CNTL__ON_OFF_CONDITION_HOLD_TIME_MASK 0x000000F8L
+#define SDMA0_POWER_CNTL__ON_OFF_STATUS_DURATION_TIME_MASK 0xFC000000L
+
static void sdma_v4_0_set_ring_funcs(struct amdgpu_device *adev);
static void sdma_v4_0_set_buffer_funcs(struct amdgpu_device *adev);
static void sdma_v4_0_set_vm_pte_funcs(struct amdgpu_device *adev);
@@ -665,6 +669,47 @@ static int sdma_v4_0_gfx_resume(struct amdgpu_device *adev)
return 0;
}
+static void sdma_v4_1_init_power_gating(struct amdgpu_device *adev)
+{
+ uint32_t def, data;
+
+ /* Enable HW based PG. */
+ def = data = RREG32(SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_POWER_CNTL));
+ data |= SDMA0_POWER_CNTL__PG_CNTL_ENABLE_MASK;
+ if (data != def)
+ WREG32(SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_POWER_CNTL), data);
+
+ /* enable interrupt */
+ def = data = RREG32(SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_CNTL));
+ data |= SDMA0_CNTL__CTXEMPTY_INT_ENABLE_MASK;
+ if (data != def)
+ WREG32(SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_CNTL), data);
+
+ /* Configure hold time to filter in-valid power on/off request. Use default right now */
+ def = data = RREG32(SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_POWER_CNTL));
+ data &= ~SDMA0_POWER_CNTL__ON_OFF_CONDITION_HOLD_TIME_MASK;
+ data |= (mmSDMA0_POWER_CNTL_DEFAULT & SDMA0_POWER_CNTL__ON_OFF_CONDITION_HOLD_TIME_MASK);
+ /* Configure switch time for hysteresis purpose. Use default right now */
+ data &= ~SDMA0_POWER_CNTL__ON_OFF_STATUS_DURATION_TIME_MASK;
+ data |= (mmSDMA0_POWER_CNTL_DEFAULT & SDMA0_POWER_CNTL__ON_OFF_STATUS_DURATION_TIME_MASK);
+ if(data != def)
+ WREG32(SOC15_REG_OFFSET(SDMA0, 0, mmSDMA0_POWER_CNTL), data);
+}
+
+static void sdma_v4_0_init_pg(struct amdgpu_device *adev)
+{
+ if (!(adev->pg_flags & AMD_PG_SUPPORT_SDMA))
+ return;
+
+ switch (adev->asic_type) {
+ case CHIP_RAVEN:
+ sdma_v4_1_init_power_gating(adev);
+ break;
+ default:
+ break;
+ }
+}
+
/**
* sdma_v4_0_rlc_resume - setup and start the async dma engines
*
@@ -675,7 +720,8 @@ static int sdma_v4_0_gfx_resume(struct amdgpu_device *adev)
*/
static int sdma_v4_0_rlc_resume(struct amdgpu_device *adev)
{
- /* XXX todo */
+ sdma_v4_0_init_pg(adev);
+
return 0;
}
--
2.5.5
More information about the amd-gfx
mailing list