[PATCH 1/8] drm/amdgpu: Correct SDMA load/unload sequence on HWS disabled mode
Felix Kuehling
Felix.Kuehling at amd.com
Wed Nov 1 23:21:55 UTC 2017
Fix the SDMA load and unload sequence as suggested by HW document.
Signed-off-by: shaoyun liu <shaoyun.liu at amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling at amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c | 47 ++++++++++++++++-------
1 file changed, 34 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
index 47d1c13..1e3e9be 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v7.c
@@ -379,29 +379,50 @@ static int kgd_hqd_sdma_load(struct kgd_dev *kgd, void *mqd)
{
struct amdgpu_device *adev = get_amdgpu_device(kgd);
struct cik_sdma_rlc_registers *m;
+ unsigned long end_jiffies;
uint32_t sdma_base_addr;
+ uint32_t data;
m = get_sdma_mqd(mqd);
sdma_base_addr = get_sdma_base_addr(m);
- WREG32(sdma_base_addr + mmSDMA0_RLC0_VIRTUAL_ADDR,
- m->sdma_rlc_virtual_addr);
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_CNTL,
+ m->sdma_rlc_rb_cntl & (~SDMA0_RLC0_RB_CNTL__RB_ENABLE_MASK));
- WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_BASE,
- m->sdma_rlc_rb_base);
+ end_jiffies = msecs_to_jiffies(2000) + jiffies;
+ while (true) {
+ data = RREG32(sdma_base_addr + mmSDMA0_RLC0_CONTEXT_STATUS);
+ if (data & SDMA0_RLC0_CONTEXT_STATUS__IDLE_MASK)
+ break;
+ if (time_after(jiffies, end_jiffies))
+ return -ETIME;
+ usleep_range(500, 1000);
+ }
+ if (m->sdma_engine_id) {
+ data = RREG32(mmSDMA1_GFX_CONTEXT_CNTL);
+ data = REG_SET_FIELD(data, SDMA1_GFX_CONTEXT_CNTL,
+ RESUME_CTX, 0);
+ WREG32(mmSDMA1_GFX_CONTEXT_CNTL, data);
+ } else {
+ data = RREG32(mmSDMA0_GFX_CONTEXT_CNTL);
+ data = REG_SET_FIELD(data, SDMA0_GFX_CONTEXT_CNTL,
+ RESUME_CTX, 0);
+ WREG32(mmSDMA0_GFX_CONTEXT_CNTL, data);
+ }
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_DOORBELL,
+ m->sdma_rlc_doorbell);
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_RPTR, 0);
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_WPTR, 0);
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_VIRTUAL_ADDR,
+ m->sdma_rlc_virtual_addr);
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_BASE, m->sdma_rlc_rb_base);
WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_BASE_HI,
m->sdma_rlc_rb_base_hi);
-
WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_RPTR_ADDR_LO,
m->sdma_rlc_rb_rptr_addr_lo);
-
WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_RPTR_ADDR_HI,
m->sdma_rlc_rb_rptr_addr_hi);
-
- WREG32(sdma_base_addr + mmSDMA0_RLC0_DOORBELL,
- m->sdma_rlc_doorbell);
-
WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_CNTL,
m->sdma_rlc_rb_cntl);
@@ -574,9 +595,9 @@ static int kgd_hqd_sdma_destroy(struct kgd_dev *kgd, void *mqd,
}
WREG32(sdma_base_addr + mmSDMA0_RLC0_DOORBELL, 0);
- WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_RPTR, 0);
- WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_WPTR, 0);
- WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_BASE, 0);
+ WREG32(sdma_base_addr + mmSDMA0_RLC0_RB_CNTL,
+ RREG32(sdma_base_addr + mmSDMA0_RLC0_RB_CNTL) |
+ SDMA0_RLC0_RB_CNTL__RB_ENABLE_MASK);
return 0;
}
--
2.7.4
More information about the amd-gfx
mailing list