[PATCH] drm/amd/amdgpu: Fix wave mask in amdgpu_debugfs_wave_read() (v2)
Tom St Denis
tom.stdenis at amd.com
Fri Nov 10 19:37:42 UTC 2017
The bottom two bits of the simd value were being put into
the upper bits of the wave value which was likely working due
to the bits being ignored (or aliased).
Eitherway, now we mask it correctly.
Signed-off-by: Tom St Denis <tom.stdenis at amd.com>
(v2) Touch up using GENMASK_ULL to a couple of other functions too
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 40 +++++++++++++++---------------
1 file changed, 20 insertions(+), 20 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index c1f1b8f15395..4944f8e1577b 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -3336,9 +3336,9 @@ static ssize_t amdgpu_debugfs_regs_read(struct file *f, char __user *buf,
pm_pg_lock = (*pos >> 23) & 1;
if (*pos & (1ULL << 62)) {
- se_bank = (*pos >> 24) & 0x3FF;
- sh_bank = (*pos >> 34) & 0x3FF;
- instance_bank = (*pos >> 44) & 0x3FF;
+ se_bank = (*pos & GENMASK_ULL(33, 24)) >> 24;
+ sh_bank = (*pos & GENMASK_ULL(43, 34)) >> 34;
+ instance_bank = (*pos & GENMASK_ULL(53, 44)) >> 44;
if (se_bank == 0x3FF)
se_bank = 0xFFFFFFFF;
@@ -3412,9 +3412,9 @@ static ssize_t amdgpu_debugfs_regs_write(struct file *f, const char __user *buf,
pm_pg_lock = (*pos >> 23) & 1;
if (*pos & (1ULL << 62)) {
- se_bank = (*pos >> 24) & 0x3FF;
- sh_bank = (*pos >> 34) & 0x3FF;
- instance_bank = (*pos >> 44) & 0x3FF;
+ se_bank = (*pos & GENMASK_ULL(33, 24)) >> 24;
+ sh_bank = (*pos & GENMASK_ULL(43, 34)) >> 34;
+ instance_bank = (*pos & GENMASK_ULL(53, 44)) >> 44;
if (se_bank == 0x3FF)
se_bank = 0xFFFFFFFF;
@@ -3762,12 +3762,12 @@ static ssize_t amdgpu_debugfs_wave_read(struct file *f, char __user *buf,
return -EINVAL;
/* decode offset */
- offset = (*pos & 0x7F);
- se = ((*pos >> 7) & 0xFF);
- sh = ((*pos >> 15) & 0xFF);
- cu = ((*pos >> 23) & 0xFF);
- wave = ((*pos >> 31) & 0xFF);
- simd = ((*pos >> 37) & 0xFF);
+ offset = (*pos & GENMASK_ULL(6, 0));
+ se = (*pos & GENMASK_ULL(14, 7)) >> 7;
+ sh = (*pos & GENMASK_ULL(22, 15)) >> 15;
+ cu = (*pos & GENMASK_ULL(30, 23)) >> 23;
+ wave = (*pos & GENMASK_ULL(36, 31)) >> 31;
+ simd = (*pos & GENMASK_ULL(44, 37)) >> 37;
/* switch to the specific se/sh/cu */
mutex_lock(&adev->grbm_idx_mutex);
@@ -3812,14 +3812,14 @@ static ssize_t amdgpu_debugfs_gpr_read(struct file *f, char __user *buf,
return -EINVAL;
/* decode offset */
- offset = (*pos & 0xFFF); /* in dwords */
- se = ((*pos >> 12) & 0xFF);
- sh = ((*pos >> 20) & 0xFF);
- cu = ((*pos >> 28) & 0xFF);
- wave = ((*pos >> 36) & 0xFF);
- simd = ((*pos >> 44) & 0xFF);
- thread = ((*pos >> 52) & 0xFF);
- bank = ((*pos >> 60) & 1);
+ offset = *pos & GENMASK_ULL(11, 0);
+ se = (*pos & GENMASK_ULL(19, 12)) >> 12;
+ sh = (*pos & GENMASK_ULL(27, 20)) >> 20;
+ cu = (*pos & GENMASK_ULL(35, 28)) >> 28;
+ wave = (*pos & GENMASK_ULL(43, 36)) >> 36;
+ simd = (*pos & GENMASK_ULL(51, 44)) >> 44;
+ thread = (*pos & GENMASK_ULL(59, 52)) >> 52;
+ bank = (*pos & GENMASK_ULL(61, 60)) >> 60;
data = kmalloc_array(1024, sizeof(*data), GFP_KERNEL);
if (!data)
--
2.12.0
More information about the amd-gfx
mailing list