[PATCH 30/43] drm/amd/display: Disable plane right after disconnected

[Harry Wentland]

From: Yongqiang Sun <yongqiang.sun at amd.com>

HDR display playing video underflow is observed when switching
to full screen due to program a lower watermark right after unlock otg.

Instead of disable plane in next flip coming, if there is a
plane disconnected, after otg unlock wait for mpcc idle and disable
the plane, then program watermark. So there is enough warter mark to make
sure current frame data pass through.

Signed-off-by: Yongqiang Sun <yongqiang.sun at amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng at amd.com>
Acked-by: Harry Wentland <harry.wentland at amd.com>
---
 drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 1ebe980bfb6d..d542e4db5495 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -2297,7 +2297,7 @@ static void dcn10_apply_ctx_for_surface(
 			pipe_ctx->plane_state->update_flags.bits.full_update)
 			program_water_mark = true;
 
-		if (removed_pipe[i] && num_planes == 0)
+		if (removed_pipe[i])
 			dcn10_disable_plane(dc, old_pipe_ctx);
 	}
 
@@ -2306,6 +2306,7 @@ static void dcn10_apply_ctx_for_surface(
 			/* pstate stuck check after watermark update */
 			dcn10_verify_allow_pstate_change_high(dc);
 		}
+
 		/* watermark is for all pipes */
 		hubbub1_program_watermarks(dc->res_pool->hubbub,
 				&context->bw.dcn.watermarks, ref_clk_mhz);
-- 
2.14.1