[PATCH 2/3] drm/amdgpu: report more amdgpu_fence_info v2

[Pixel Ding]

From: pding <Pixel.Ding at amd.com>

Only for GFX ring. This can help checking MCBP feature.

v2: report more fence offs.

The fence at the end of the frame will indicate the completion status.
If the frame completed normally, the fence is written to the address
given in the EVENT_WRITE_EOP packet. If preemption occurred in the
previous IB the address is adjusted by 2 DWs. If work submitted in the
frame was reset before completion, the fence address is adjusted by
four DWs. In the case that preemption occurred, and before preemption
completed a reset was initiated, the address will be adjusted with six
DWs

Signed-off-by: pding <Pixel.Ding at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index 09d5a5c..688740e 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -645,6 +645,19 @@ static int amdgpu_debugfs_fence_info(struct seq_file *m, void *data)
 			   atomic_read(&ring->fence_drv.last_seq));
 		seq_printf(m, "Last emitted        0x%08x\n",
 			   ring->fence_drv.sync_seq);
+
+		if (ring->funcs->type != AMDGPU_RING_TYPE_GFX)
+			continue;
+
+		/* set in CP_VMID_PREEMPT and preemption occurred */
+		seq_printf(m, "Last preempted      0x%08x\n",
+			   le32_to_cpu(*(ring->fence_drv.cpu_addr + 2)));
+		/* set in CP_VMID_RESET and reset occurred */
+		seq_printf(m, "Last reset          0x%08x\n",
+			   le32_to_cpu(*(ring->fence_drv.cpu_addr + 4)));
+		/* Both preemption and reset occurred */
+		seq_printf(m, "Last both           0x%08x\n",
+			   le32_to_cpu(*(ring->fence_drv.cpu_addr + 6)));
 	}
 	return 0;
 }
-- 
2.9.5