[PATCH 2/2] [RFC]drm: add syncobj timeline support
Daniel Vetter
daniel at ffwll.ch
Wed Aug 22 09:24:45 UTC 2018
On Wed, Aug 22, 2018 at 04:49:28PM +0800, Chunming Zhou wrote:
> VK_KHR_timeline_semaphore:
> This extension introduces a new type of semaphore that has an integer payload
> identifying a point in a timeline. Such timeline semaphores support the
> following operations:
> * Host query - A host operation that allows querying the payload of the
> timeline semaphore.
> * Host wait - A host operation that allows a blocking wait for a
> timeline semaphore to reach a specified value.
> * Device wait - A device operation that allows waiting for a
> timeline semaphore to reach a specified value.
> * Device signal - A device operation that allows advancing the
> timeline semaphore to a specified value.
>
> Since it's a timeline, that means the front time point(PT) always is signaled before the late PT.
> a. signal PT design:
> Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled,
> the timeline will increase to value of PT[N].
> b. wait PT design:
> Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare
> wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be
> signaled, otherwise keep in list. semaphore wait operation can wait on any point of timeline,
> so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to
> perform that.
>
> TODO:
> CPU query and wait on timeline semaphore.
Another TODO: igt testcase for all the cornercases. We already have
other syncobj tests in there.
That would also help with understanding how this is supposed to be used,
since I'm a bit too dense to immediately get your algorithm by just
staring at the code.
> Change-Id: I9f09aae225e268442c30451badac40406f24262c
> Signed-off-by: Chunming Zhou <david1.zhou at amd.com>
> Cc: Christian Konig <christian.koenig at amd.com>
> Cc: Dave Airlie <airlied at redhat.com>
> Cc: Daniel Rakos <Daniel.Rakos at amd.com>
> ---
> drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 7 +-
> drivers/gpu/drm/drm_syncobj.c | 385 ++++++++++++++++++++++++++++++++-
> drivers/gpu/drm/v3d/v3d_gem.c | 4 +-
> drivers/gpu/drm/vc4/vc4_gem.c | 2 +-
> include/drm/drm_syncobj.h | 45 +++-
> include/uapi/drm/drm.h | 3 +-
> 6 files changed, 435 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
> index d42d1c8f78f6..463cc8960723 100644
> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
> @@ -1105,7 +1105,7 @@ static int amdgpu_syncobj_lookup_and_add_to_sync(struct amdgpu_cs_parser *p,
> {
> int r;
> struct dma_fence *fence;
> - r = drm_syncobj_find_fence(p->filp, handle, &fence);
> + r = drm_syncobj_find_fence(p->filp, handle, &fence, 0);
> if (r)
> return r;
>
> @@ -1193,8 +1193,9 @@ static void amdgpu_cs_post_dependencies(struct amdgpu_cs_parser *p)
> {
> int i;
>
> - for (i = 0; i < p->num_post_dep_syncobjs; ++i)
> - drm_syncobj_replace_fence(p->post_dep_syncobjs[i], p->fence);
> + for (i = 0; i < p->num_post_dep_syncobjs; ++i) {
> + drm_syncobj_signal_fence(p->post_dep_syncobjs[i], p->fence, 0);
> + }
> }
>
> static int amdgpu_cs_submit(struct amdgpu_cs_parser *p,
> diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c
> index 70af32d0def1..3709f36c901e 100644
> --- a/drivers/gpu/drm/drm_syncobj.c
> +++ b/drivers/gpu/drm/drm_syncobj.c
> @@ -187,6 +187,191 @@ void drm_syncobj_replace_fence(struct drm_syncobj *syncobj,
> }
> EXPORT_SYMBOL(drm_syncobj_replace_fence);
>
> +static void drm_syncobj_timeline_signal_submission_fences(struct drm_syncobj *syncobj)
> +{
> + struct rb_node *node = NULL;
> + struct drm_syncobj_wait_pt *wait_pt = NULL;
> +
> + spin_lock(&syncobj->lock);
> + for(node = rb_first(&syncobj->syncobj_timeline.wait_pt_tree);
> + node != NULL; node = rb_next(node)) {
> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
> + if (wait_pt->value <= syncobj->syncobj_timeline.signal_point) {
> + if (wait_pt->submission_fence)
> + dma_fence_signal(&wait_pt->submission_fence->base);
> + } else {
> + /* the loop is from left to right, the later entry value is
> + * bigger, so don't need to check any more */
> + break;
> + }
This seems to reinvet syncobj->cb_list. Since this is the exact same
"future fence that doesn't even exist yet" problem I think those two code
path should be unified. In general I think it'd be much better if we treat
the old syncobj as a timeline with a limit of 1 slot only.
Or there needs to be a really good reason why all new code.
Specifically for this stuff here having unified future fence semantics
will allow drivers to do clever stuff with them.
> + }
> + spin_unlock(&syncobj->lock);
> +}
> +
> +static void drm_syncobj_timeline_signal_wait_pts(struct drm_syncobj *syncobj)
> +{
> + struct rb_node *node = NULL;
> + struct drm_syncobj_wait_pt *wait_pt = NULL;
> +
> + spin_lock(&syncobj->lock);
> + for(node = rb_first(&syncobj->syncobj_timeline.wait_pt_tree);
> + node != NULL; ) {
> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
> + node = rb_next(node);
> + if (wait_pt->value <= syncobj->syncobj_timeline.timeline) {
> + dma_fence_signal(&wait_pt->base.base);
> + rb_erase(&wait_pt->node,
> + &syncobj->syncobj_timeline.wait_pt_tree);
> + RB_CLEAR_NODE(&wait_pt->node);
> + if (wait_pt->submission_fence)
> + dma_fence_put(&wait_pt->submission_fence->base);
> + /* kfree(wait_pt) is excuted by fence put */
> + dma_fence_put(&wait_pt->base.base);
> + } else {
> + /* the loop is from left to right, the later entry value is
> + * bigger, so don't need to check any more */
> + break;
> + }
> + }
> + spin_unlock(&syncobj->lock);
> +}
> +
> +
> +static void pt_fence_cb(struct drm_syncobj_signal_pt *signal_pt)
> +{
> + struct dma_fence *fence = NULL;
> + struct drm_syncobj *syncobj;
> +
> + fence = signal_pt->signal_fence;
> + signal_pt->signal_fence = NULL;
> + dma_fence_put(fence);
> + fence = signal_pt->pre_pt_base;
> + signal_pt->pre_pt_base = NULL;
> + dma_fence_put(fence);
> +
> + syncobj = signal_pt->syncobj;
> + spin_lock(&syncobj->lock);
> + list_del(&signal_pt->list);
> + syncobj->syncobj_timeline.timeline = signal_pt->value;
> + spin_unlock(&syncobj->lock);
> + /* kfree(signal_pt) will be executed by below fence put */
> + dma_fence_put(&signal_pt->base.base);
> + drm_syncobj_timeline_signal_wait_pts(syncobj);
> +}
> +static void pt_signal_fence_func(struct dma_fence *fence,
> + struct dma_fence_cb *cb)
> +{
> + struct drm_syncobj_signal_pt *signal_pt =
> + container_of(cb, struct drm_syncobj_signal_pt, signal_cb);
> +
> + if (signal_pt->pre_pt_base &&
> + !dma_fence_is_signaled(signal_pt->pre_pt_base))
> + return;
> +
> + pt_fence_cb(signal_pt);
> +}
> +static void pt_pre_fence_func(struct dma_fence *fence,
> + struct dma_fence_cb *cb)
> +{
> + struct drm_syncobj_signal_pt *signal_pt =
> + container_of(cb, struct drm_syncobj_signal_pt, pre_pt_cb);
> +
> + if (signal_pt->signal_fence &&
> + !dma_fence_is_signaled(signal_pt->pre_pt_base))
> + return;
> +
> + pt_fence_cb(signal_pt);
> +}
> +
> +static int drm_syncobj_timeline_signal_fence(struct drm_syncobj *syncobj,
> + struct dma_fence *fence,
> + u64 point)
> +{
> + struct drm_syncobj_signal_pt *signal_pt =
> + kzalloc(sizeof(struct drm_syncobj_signal_pt), GFP_KERNEL);
> + struct drm_syncobj_signal_pt *tail_pt;
> + struct dma_fence *tail_pt_fence = NULL;
> + int ret = 0;
> +
> + if (!signal_pt)
> + return -ENOMEM;
> + if (syncobj->syncobj_timeline.signal_point >= point) {
> + DRM_WARN("A later signal is ready!");
> + goto out;
> + }
> + if (fence)
> + dma_fence_get(fence);
> + spin_lock(&syncobj->lock);
> + spin_lock_init(&signal_pt->base.lock);
> + dma_fence_init(&signal_pt->base.base,
> + &drm_syncobj_stub_fence_ops,
> + &signal_pt->base.lock,
> + syncobj->syncobj_timeline.timeline_context, point);
> + signal_pt->signal_fence =
> + rcu_dereference_protected(fence,
> + lockdep_is_held(&fence->lock));
> + if (!list_empty(&syncobj->syncobj_timeline.signal_pt_list)) {
> + tail_pt = list_last_entry(&syncobj->syncobj_timeline.signal_pt_list,
> + struct drm_syncobj_signal_pt, list);
> + tail_pt_fence = &tail_pt->base.base;
> + if (dma_fence_is_signaled(tail_pt_fence))
> + tail_pt_fence = NULL;
> + }
> + if (tail_pt_fence)
> + signal_pt->pre_pt_base =
> + dma_fence_get(rcu_dereference_protected(tail_pt_fence,
> + lockdep_is_held(&tail_pt_fence->lock)));
> +
> + signal_pt->value = point;
> + syncobj->syncobj_timeline.signal_point = point;
> + signal_pt->syncobj = syncobj;
> + INIT_LIST_HEAD(&signal_pt->list);
> + list_add_tail(&signal_pt->list, &syncobj->syncobj_timeline.signal_pt_list);
> + spin_unlock(&syncobj->lock);
> + drm_syncobj_timeline_signal_submission_fences(syncobj);
> + /**
> + * Every pt is depending on signal fence and previous pt fence, add
> + * callbacks to them
> + */
> + if (!dma_fence_is_signaled(signal_pt->signal_fence))
> + dma_fence_add_callback(signal_pt->signal_fence,
> + &signal_pt->signal_cb,
> + pt_signal_fence_func);
> + else
> + pt_signal_fence_func(signal_pt->signal_fence,
> + &signal_pt->signal_cb);
> + if (signal_pt->pre_pt_base && !dma_fence_is_signaled(signal_pt->pre_pt_base))
> + dma_fence_add_callback(signal_pt->pre_pt_base,
> + &signal_pt->pre_pt_cb,
> + pt_pre_fence_func);
> + else
> + pt_pre_fence_func(signal_pt->pre_pt_base, &signal_pt->pre_pt_cb);
> +
> +
> + return 0;
> +out:
> + kfree(signal_pt);
> + return ret;
> +}
> +
> +/**
> + * drm_syncobj_signal_fence - place fence into a sync object.
> + * @syncobj: Sync object to replace fence in
> + * @fence: fence to install in sync file.
> + *
> + * This places the fence into normal or timeline sync object
> + */
> +void drm_syncobj_signal_fence(struct drm_syncobj *syncobj,
> + struct dma_fence *fence,
> + u64 point)
This is a very confusion function name. Feels like
drm_syncobj_timeline_signal_fence is rather misnamed. I think we should
just extend replace_fence like you do with find_fence already.
> +{
> + if (syncobj->type == DRM_SYNCOBJ_TYPE_NORMAL)
> + drm_syncobj_replace_fence(syncobj, fence);
> + else if (syncobj->type == DRM_SYNCOBJ_TYPE_TIMELINE)
> + drm_syncobj_timeline_signal_fence(syncobj, fence, point);
> +}
> +EXPORT_SYMBOL(drm_syncobj_signal_fence);
> +
> static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
> {
> struct drm_syncobj_stub_fence *fence;
> @@ -205,12 +390,150 @@ static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
>
> return 0;
> }
> +static struct drm_syncobj_wait_pt *
> +drm_syncobj_timeline_lookup_wait_pt(struct drm_syncobj *syncobj, u64 point)
> +{
> + struct rb_node *node = syncobj->syncobj_timeline.wait_pt_tree.rb_node;
> + struct drm_syncobj_wait_pt *wait_pt = NULL;
> +
> +
> + spin_lock(&syncobj->lock);
> + while(node) {
> + int result = point - wait_pt->value;
> +
> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
> + if (result < 0)
> + node = node->rb_left;
> + else if (result > 0)
> + node = node->rb_right;
> + else
> + break;
> + }
> + spin_unlock(&syncobj->lock);
> +
> + return wait_pt;
> +}
> +
> +static struct drm_syncobj_wait_pt *
> +drm_syncobj_timeline_create_wait_pt(struct drm_syncobj *syncobj, u64 point)
> +{
> + struct drm_syncobj_wait_pt *wait_pt;
> + struct rb_node **new = &(syncobj->syncobj_timeline.wait_pt_tree.rb_node), *parent = NULL;
> +
> + wait_pt = kzalloc(sizeof(*wait_pt), GFP_KERNEL);
> + if (!wait_pt)
> + return NULL;
> + spin_lock_init(&wait_pt->base.lock);
> + dma_fence_init(&wait_pt->base.base,
> + &drm_syncobj_stub_fence_ops,
> + &wait_pt->base.lock,
> + syncobj->syncobj_timeline.timeline_context, point);
> + wait_pt->submission_fence = NULL;
> + /* check if the pt is already sumbitted, if yes, then don't need to
> + * create submission fence, otherwise create it */
> + if (point > syncobj->syncobj_timeline.signal_point) {
> + wait_pt->submission_fence =
> + kzalloc(sizeof(struct drm_syncobj_stub_fence),
> + GFP_KERNEL);
> + if (!wait_pt->submission_fence) {
> + dma_fence_put(&wait_pt->base.base);
> + return NULL;
> + }
> + spin_lock_init(&wait_pt->submission_fence->lock);
> + dma_fence_init(&wait_pt->submission_fence->base,
> + &drm_syncobj_stub_fence_ops,
> + &wait_pt->submission_fence->lock,
> + syncobj->syncobj_timeline.submission_context,
> + point);
> + }
> + wait_pt->value = point;
> +
> + /* wait pt must be in an order, so that we can easily lookup and signal
> + * it */
> + spin_lock(&syncobj->lock);
> + if (point <= syncobj->syncobj_timeline.timeline)
> + dma_fence_signal(&wait_pt->base.base);
> + if (wait_pt->submission_fence &&
> + point <= syncobj->syncobj_timeline.signal_point)
> + dma_fence_signal(&wait_pt->submission_fence->base);
> + while(*new) {
> + struct drm_syncobj_wait_pt *this =
> + rb_entry(*new, struct drm_syncobj_wait_pt, node);
> + int result = wait_pt->value - this->value;
> +
> + parent = *new;
> + if (result < 0)
> + new = &((*new)->rb_left);
> + else if (result > 0)
> + new = &((*new)->rb_right);
> + else
> + goto exist;
> + }
> +
> + rb_link_node(&wait_pt->node, parent, new);
> + rb_insert_color(&wait_pt->node, &syncobj->syncobj_timeline.wait_pt_tree);
> + spin_unlock(&syncobj->lock);
> + return wait_pt;
> +exist:
> + spin_unlock(&syncobj->lock);
> + if (wait_pt->submission_fence)
> + dma_fence_put(&wait_pt->submission_fence->base);
> + dma_fence_put(&wait_pt->base.base);
> + wait_pt = drm_syncobj_timeline_lookup_wait_pt(syncobj, point);
> + return wait_pt;
> +}
> +
> +static struct dma_fence *
> +drm_syncobj_timeline_point_get(struct drm_syncobj *syncobj, u64 point, u64 flag)
> +{
> + struct drm_syncobj_wait_pt *wait_pt;
> +
> + /* already signaled, simply return a signaled stub fence */
> + if (point <= syncobj->syncobj_timeline.timeline) {
> + struct drm_syncobj_stub_fence *fence;
> +
> + fence = kzalloc(sizeof(*fence), GFP_KERNEL);
> + if (fence == NULL)
> + return NULL;
> +
> + spin_lock_init(&fence->lock);
> + dma_fence_init(&fence->base, &drm_syncobj_stub_fence_ops,
> + &fence->lock, 0, 0);
> + dma_fence_signal(&fence->base);
> + return &fence->base;
> + }
> +
> + /* check if the wait pt exists */
> + wait_pt = drm_syncobj_timeline_lookup_wait_pt(syncobj, point);
> + if (!wait_pt) {
> + /* This is a new wait pt, so create it */
> + wait_pt = drm_syncobj_timeline_create_wait_pt(syncobj, point);
> + if (!wait_pt)
> + return NULL;
> + }
> + if (wait_pt) {
> + struct dma_fence *fence;
> + if (wait_pt->submission_fence) {
> + if (flag & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT)
> + dma_fence_wait(&wait_pt->submission_fence->base, true);
> + else if (!dma_fence_is_signaled(&wait_pt->submission_fence->base))
> + return NULL;
> + }
> + rcu_read_lock();
> + fence = dma_fence_get_rcu(&wait_pt->base.base);
> + rcu_read_unlock();
> + return fence;
> + }
> + return NULL;
> +}
> +
>
> /**
> * drm_syncobj_find_fence - lookup and reference the fence in a sync object
> * @file_private: drm file private pointer
> * @handle: sync object handle to lookup.
> * @fence: out parameter for the fence
> + * @point: timeline point
> *
> * This is just a convenience function that combines drm_syncobj_find() and
> * drm_syncobj_fence_get().
> @@ -221,7 +544,8 @@ static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
> */
> int drm_syncobj_find_fence(struct drm_file *file_private,
> u32 handle,
> - struct dma_fence **fence)
> + struct dma_fence **fence,
> + u64 point)
> {
> struct drm_syncobj *syncobj = drm_syncobj_find(file_private, handle);
> int ret = 0;
> @@ -229,7 +553,15 @@ int drm_syncobj_find_fence(struct drm_file *file_private,
> if (!syncobj)
> return -ENOENT;
>
> - *fence = drm_syncobj_fence_get(syncobj);
> + if (syncobj->type == DRM_SYNCOBJ_TYPE_NORMAL) {
> + *fence = drm_syncobj_fence_get(syncobj);
Needs at least a WARN_ON(point != 0) here, since I'd say that would be a
driver bug. Or userspace bug, in which case we need to return -EINVAL;
Hard to tell without the driver implementation.
> + }else if (syncobj->type == DRM_SYNCOBJ_TYPE_TIMELINE) {
> + *fence = drm_syncobj_timeline_point_get(syncobj, point,
> + DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT);
> + } else {
> + DRM_ERROR("invalid syncobj type\n");
> + return -EINVAL;
> + }
> if (!*fence) {
> ret = -EINVAL;
> }
> @@ -238,6 +570,35 @@ int drm_syncobj_find_fence(struct drm_file *file_private,
> }
> EXPORT_SYMBOL(drm_syncobj_find_fence);
>
> +static void drm_syncobj_timeline_fini(struct drm_syncobj *syncobj,
> + struct drm_syncobj_timeline *syncobj_timeline)
> +{
> + struct rb_node *node = NULL;
> + struct drm_syncobj_wait_pt *wait_pt = NULL;
> + struct drm_syncobj_signal_pt *signal_pt = NULL, *tmp;
> +
> + spin_lock(&syncobj->lock);
> + for(node = rb_first(&syncobj_timeline->wait_pt_tree);
> + node != NULL; ) {
> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
> + node = rb_next(node);
> + rb_erase(&wait_pt->node,
> + &syncobj_timeline->wait_pt_tree);
> + RB_CLEAR_NODE(&wait_pt->node);
> + if (wait_pt->submission_fence)
> + dma_fence_put(&wait_pt->submission_fence->base);
> + /* kfree(wait_pt) is excuted by fence put */
> + dma_fence_put(&wait_pt->base.base);
> + }
> + list_for_each_entry_safe(signal_pt, tmp,
> + &syncobj_timeline->signal_pt_list, list) {
> + list_del(&signal_pt->list);
> + dma_fence_put(signal_pt->signal_fence);
> + dma_fence_put(signal_pt->pre_pt_base);
> + dma_fence_put(&signal_pt->base.base);
> + }
> + spin_unlock(&syncobj->lock);
> +}
> /**
> * drm_syncobj_free - free a sync object.
> * @kref: kref to free.
> @@ -250,10 +611,22 @@ void drm_syncobj_free(struct kref *kref)
> struct drm_syncobj,
> refcount);
> drm_syncobj_replace_fence(syncobj, NULL);
> + drm_syncobj_timeline_fini(syncobj, &syncobj->syncobj_timeline);
> kfree(syncobj);
> }
> EXPORT_SYMBOL(drm_syncobj_free);
>
> +static void drm_syncobj_timeline_init(struct drm_syncobj_timeline
> + *syncobj_timeline)
> +{
> + syncobj_timeline->timeline_context = dma_fence_context_alloc(1);
> + syncobj_timeline->submission_context = dma_fence_context_alloc(1);
> + syncobj_timeline->timeline = 0;
> + syncobj_timeline->signal_point = 0;
> +
> + syncobj_timeline->wait_pt_tree = RB_ROOT;
> + INIT_LIST_HEAD(&syncobj_timeline->signal_pt_list);
> +}
> /**
> * drm_syncobj_create - create a new syncobj
> * @out_syncobj: returned syncobj
> @@ -279,6 +652,12 @@ int drm_syncobj_create(struct drm_syncobj **out_syncobj, uint32_t flags,
> kref_init(&syncobj->refcount);
> INIT_LIST_HEAD(&syncobj->cb_list);
> spin_lock_init(&syncobj->lock);
> + if (flags & DRM_SYNCOBJ_CREATE_TYPE_TIMELINE) {
> + syncobj->type = DRM_SYNCOBJ_TYPE_TIMELINE;
> + drm_syncobj_timeline_init(&syncobj->syncobj_timeline);
> + } else {
> + syncobj->type = DRM_SYNCOBJ_TYPE_NORMAL;
> + }
>
> if (flags & DRM_SYNCOBJ_CREATE_SIGNALED) {
> ret = drm_syncobj_assign_null_handle(syncobj);
> @@ -491,7 +870,7 @@ static int drm_syncobj_export_sync_file(struct drm_file *file_private,
> if (fd < 0)
> return fd;
>
> - ret = drm_syncobj_find_fence(file_private, handle, &fence);
> + ret = drm_syncobj_find_fence(file_private, handle, &fence, 0);
> if (ret)
> goto err_put_fd;
>
> diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
> index 9029590267aa..f24c3eccb4d5 100644
> --- a/drivers/gpu/drm/v3d/v3d_gem.c
> +++ b/drivers/gpu/drm/v3d/v3d_gem.c
> @@ -521,12 +521,12 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
> kref_init(&exec->refcount);
>
> ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl,
> - &exec->bin.in_fence);
> + &exec->bin.in_fence, 0);
> if (ret == -EINVAL)
> goto fail;
>
> ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl,
> - &exec->render.in_fence);
> + &exec->render.in_fence, 0);
> if (ret == -EINVAL)
> goto fail;
>
> diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
> index 7910b9acedd6..f7b4971342e8 100644
> --- a/drivers/gpu/drm/vc4/vc4_gem.c
> +++ b/drivers/gpu/drm/vc4/vc4_gem.c
> @@ -1173,7 +1173,7 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
>
> if (args->in_sync) {
> ret = drm_syncobj_find_fence(file_priv, args->in_sync,
> - &in_fence);
> + &in_fence, 0);
> if (ret)
> goto fail;
>
> diff --git a/include/drm/drm_syncobj.h b/include/drm/drm_syncobj.h
> index b04c492ddbb5..b6e193c6cc9a 100644
> --- a/include/drm/drm_syncobj.h
> +++ b/include/drm/drm_syncobj.h
> @@ -54,6 +54,41 @@ const struct dma_fence_ops drm_syncobj_stub_fence_ops = {
> .release = NULL,
> };
>
> +enum drm_syncobj_type {
> + DRM_SYNCOBJ_TYPE_NORMAL,
> + DRM_SYNCOBJ_TYPE_TIMELINE
> +};
> +
> +struct drm_syncobj;
> +struct drm_syncobj_wait_pt {
> + struct drm_syncobj_stub_fence base;
> + struct drm_syncobj_stub_fence *submission_fence;
> + u64 value;
> + struct rb_node node;
> +};
> +struct drm_syncobj_signal_pt {
> + struct drm_syncobj_stub_fence base;
> + struct dma_fence *signal_fence;
> + struct dma_fence *pre_pt_base;
> + struct dma_fence_cb signal_cb;
> + struct dma_fence_cb pre_pt_cb;
> + struct drm_syncobj *syncobj;
> + u64 value;
> + struct list_head list;
> +};
The above internal structs shouldn't be in the public header.
Some tiny comments about what each piece is for would also go a long way
towards me being able to understand things.
Thanks, Daniel
> +struct drm_syncobj_timeline {
> + u64 timeline_context;
> + u64 submission_context;
> + /**
> + * @timeline: syncobj timeline
> + */
> + u64 timeline;
> + u64 signal_point;
> +
> +
> + struct rb_root wait_pt_tree;
> + struct list_head signal_pt_list;
> +};
> /**
> * struct drm_syncobj - sync object.
> *
> @@ -64,6 +99,11 @@ struct drm_syncobj {
> * @refcount: Reference count of this object.
> */
> struct kref refcount;
> + /**
> + * @type: indicate syncobj type
> + */
> + enum drm_syncobj_type type;
> + struct drm_syncobj_timeline syncobj_timeline;
> /**
> * @fence:
> * NULL or a pointer to the fence bound to this object.
> @@ -162,9 +202,12 @@ void drm_syncobj_remove_callback(struct drm_syncobj *syncobj,
> struct drm_syncobj_cb *cb);
> void drm_syncobj_replace_fence(struct drm_syncobj *syncobj,
> struct dma_fence *fence);
> +void drm_syncobj_signal_fence(struct drm_syncobj *syncobj,
> + struct dma_fence *fence,
> + u64 point);
> int drm_syncobj_find_fence(struct drm_file *file_private,
> u32 handle,
> - struct dma_fence **fence);
> + struct dma_fence **fence, u64 point);
> void drm_syncobj_free(struct kref *kref);
> int drm_syncobj_create(struct drm_syncobj **out_syncobj, uint32_t flags,
> struct dma_fence *fence);
> diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h
> index 300f336633f2..71e6cd1c88f8 100644
> --- a/include/uapi/drm/drm.h
> +++ b/include/uapi/drm/drm.h
> @@ -717,6 +717,8 @@ struct drm_prime_handle {
> struct drm_syncobj_create {
> __u32 handle;
> #define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0)
> +#define DRM_SYNCOBJ_CREATE_TYPE_NORMAL (1 << 1)
> +#define DRM_SYNCOBJ_CREATE_TYPE_TIMELINE (1 << 2)
> __u32 flags;
> };
>
> @@ -734,7 +736,6 @@ struct drm_syncobj_handle {
> __s32 fd;
> __u32 pad;
> };
> -
> #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
> #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
> struct drm_syncobj_wait {
> --
> 2.14.1
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
More information about the amd-gfx
mailing list