[PATCH 2/2] [RFC]drm: add syncobj timeline support
zhoucm1
zhoucm1 at amd.com
Wed Aug 22 09:59:37 UTC 2018
On 2018年08月22日 17:31, Daniel Vetter wrote:
> On Wed, Aug 22, 2018 at 05:28:17PM +0800, zhoucm1 wrote:
>>
>> On 2018年08月22日 17:24, Daniel Vetter wrote:
>>> On Wed, Aug 22, 2018 at 04:49:28PM +0800, Chunming Zhou wrote:
>>>> VK_KHR_timeline_semaphore:
>>>> This extension introduces a new type of semaphore that has an integer payload
>>>> identifying a point in a timeline. Such timeline semaphores support the
>>>> following operations:
>>>> * Host query - A host operation that allows querying the payload of the
>>>> timeline semaphore.
>>>> * Host wait - A host operation that allows a blocking wait for a
>>>> timeline semaphore to reach a specified value.
>>>> * Device wait - A device operation that allows waiting for a
>>>> timeline semaphore to reach a specified value.
>>>> * Device signal - A device operation that allows advancing the
>>>> timeline semaphore to a specified value.
>>>>
>>>> Since it's a timeline, that means the front time point(PT) always is signaled before the late PT.
>>>> a. signal PT design:
>>>> Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled,
>>>> the timeline will increase to value of PT[N].
>>>> b. wait PT design:
>>>> Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare
>>>> wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be
>>>> signaled, otherwise keep in list. semaphore wait operation can wait on any point of timeline,
>>>> so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to
>>>> perform that.
>>>>
>>>> TODO:
>>>> CPU query and wait on timeline semaphore.
>>> Another TODO: igt testcase for all the cornercases. We already have
>>> other syncobj tests in there.
>> Yes, I'm also trying to find where test should be wrote, Could you give a
>> directory?
> There's already tests/syncobj_basic.c and tests/syncobj_wait.c. Either
> extend those, or probably better to start a new tests/syncobj_timeline.c
> since I expect this will have a lot of corner-cases we need to check.
I failed to find them in both kernel and libdrm, Could you point which
test you said?
Thanks,
David Zhou
> -Daniel
>
>> Thanks,
>> David Zhou
>>> That would also help with understanding how this is supposed to be used,
>>> since I'm a bit too dense to immediately get your algorithm by just
>>> staring at the code.
>>>
>>>
>>>> Change-Id: I9f09aae225e268442c30451badac40406f24262c
>>>> Signed-off-by: Chunming Zhou <david1.zhou at amd.com>
>>>> Cc: Christian Konig <christian.koenig at amd.com>
>>>> Cc: Dave Airlie <airlied at redhat.com>
>>>> Cc: Daniel Rakos <Daniel.Rakos at amd.com>
>>>> ---
>>>> drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 7 +-
>>>> drivers/gpu/drm/drm_syncobj.c | 385 ++++++++++++++++++++++++++++++++-
>>>> drivers/gpu/drm/v3d/v3d_gem.c | 4 +-
>>>> drivers/gpu/drm/vc4/vc4_gem.c | 2 +-
>>>> include/drm/drm_syncobj.h | 45 +++-
>>>> include/uapi/drm/drm.h | 3 +-
>>>> 6 files changed, 435 insertions(+), 11 deletions(-)
>>>>
>>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
>>>> index d42d1c8f78f6..463cc8960723 100644
>>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
>>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c
>>>> @@ -1105,7 +1105,7 @@ static int amdgpu_syncobj_lookup_and_add_to_sync(struct amdgpu_cs_parser *p,
>>>> {
>>>> int r;
>>>> struct dma_fence *fence;
>>>> - r = drm_syncobj_find_fence(p->filp, handle, &fence);
>>>> + r = drm_syncobj_find_fence(p->filp, handle, &fence, 0);
>>>> if (r)
>>>> return r;
>>>> @@ -1193,8 +1193,9 @@ static void amdgpu_cs_post_dependencies(struct amdgpu_cs_parser *p)
>>>> {
>>>> int i;
>>>> - for (i = 0; i < p->num_post_dep_syncobjs; ++i)
>>>> - drm_syncobj_replace_fence(p->post_dep_syncobjs[i], p->fence);
>>>> + for (i = 0; i < p->num_post_dep_syncobjs; ++i) {
>>>> + drm_syncobj_signal_fence(p->post_dep_syncobjs[i], p->fence, 0);
>>>> + }
>>>> }
>>>> static int amdgpu_cs_submit(struct amdgpu_cs_parser *p,
>>>> diff --git a/drivers/gpu/drm/drm_syncobj.c b/drivers/gpu/drm/drm_syncobj.c
>>>> index 70af32d0def1..3709f36c901e 100644
>>>> --- a/drivers/gpu/drm/drm_syncobj.c
>>>> +++ b/drivers/gpu/drm/drm_syncobj.c
>>>> @@ -187,6 +187,191 @@ void drm_syncobj_replace_fence(struct drm_syncobj *syncobj,
>>>> }
>>>> EXPORT_SYMBOL(drm_syncobj_replace_fence);
>>>> +static void drm_syncobj_timeline_signal_submission_fences(struct drm_syncobj *syncobj)
>>>> +{
>>>> + struct rb_node *node = NULL;
>>>> + struct drm_syncobj_wait_pt *wait_pt = NULL;
>>>> +
>>>> + spin_lock(&syncobj->lock);
>>>> + for(node = rb_first(&syncobj->syncobj_timeline.wait_pt_tree);
>>>> + node != NULL; node = rb_next(node)) {
>>>> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
>>>> + if (wait_pt->value <= syncobj->syncobj_timeline.signal_point) {
>>>> + if (wait_pt->submission_fence)
>>>> + dma_fence_signal(&wait_pt->submission_fence->base);
>>>> + } else {
>>>> + /* the loop is from left to right, the later entry value is
>>>> + * bigger, so don't need to check any more */
>>>> + break;
>>>> + }
>>> This seems to reinvet syncobj->cb_list. Since this is the exact same
>>> "future fence that doesn't even exist yet" problem I think those two code
>>> path should be unified. In general I think it'd be much better if we treat
>>> the old syncobj as a timeline with a limit of 1 slot only.
>>>
>>> Or there needs to be a really good reason why all new code.
>>>
>>> Specifically for this stuff here having unified future fence semantics
>>> will allow drivers to do clever stuff with them.
>>>
>>>> + }
>>>> + spin_unlock(&syncobj->lock);
>>>> +}
>>>> +
>>>> +static void drm_syncobj_timeline_signal_wait_pts(struct drm_syncobj *syncobj)
>>>> +{
>>>> + struct rb_node *node = NULL;
>>>> + struct drm_syncobj_wait_pt *wait_pt = NULL;
>>>> +
>>>> + spin_lock(&syncobj->lock);
>>>> + for(node = rb_first(&syncobj->syncobj_timeline.wait_pt_tree);
>>>> + node != NULL; ) {
>>>> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
>>>> + node = rb_next(node);
>>>> + if (wait_pt->value <= syncobj->syncobj_timeline.timeline) {
>>>> + dma_fence_signal(&wait_pt->base.base);
>>>> + rb_erase(&wait_pt->node,
>>>> + &syncobj->syncobj_timeline.wait_pt_tree);
>>>> + RB_CLEAR_NODE(&wait_pt->node);
>>>> + if (wait_pt->submission_fence)
>>>> + dma_fence_put(&wait_pt->submission_fence->base);
>>>> + /* kfree(wait_pt) is excuted by fence put */
>>>> + dma_fence_put(&wait_pt->base.base);
>>>> + } else {
>>>> + /* the loop is from left to right, the later entry value is
>>>> + * bigger, so don't need to check any more */
>>>> + break;
>>>> + }
>>>> + }
>>>> + spin_unlock(&syncobj->lock);
>>>> +}
>>>> +
>>>> +
>>>> +static void pt_fence_cb(struct drm_syncobj_signal_pt *signal_pt)
>>>> +{
>>>> + struct dma_fence *fence = NULL;
>>>> + struct drm_syncobj *syncobj;
>>>> +
>>>> + fence = signal_pt->signal_fence;
>>>> + signal_pt->signal_fence = NULL;
>>>> + dma_fence_put(fence);
>>>> + fence = signal_pt->pre_pt_base;
>>>> + signal_pt->pre_pt_base = NULL;
>>>> + dma_fence_put(fence);
>>>> +
>>>> + syncobj = signal_pt->syncobj;
>>>> + spin_lock(&syncobj->lock);
>>>> + list_del(&signal_pt->list);
>>>> + syncobj->syncobj_timeline.timeline = signal_pt->value;
>>>> + spin_unlock(&syncobj->lock);
>>>> + /* kfree(signal_pt) will be executed by below fence put */
>>>> + dma_fence_put(&signal_pt->base.base);
>>>> + drm_syncobj_timeline_signal_wait_pts(syncobj);
>>>> +}
>>>> +static void pt_signal_fence_func(struct dma_fence *fence,
>>>> + struct dma_fence_cb *cb)
>>>> +{
>>>> + struct drm_syncobj_signal_pt *signal_pt =
>>>> + container_of(cb, struct drm_syncobj_signal_pt, signal_cb);
>>>> +
>>>> + if (signal_pt->pre_pt_base &&
>>>> + !dma_fence_is_signaled(signal_pt->pre_pt_base))
>>>> + return;
>>>> +
>>>> + pt_fence_cb(signal_pt);
>>>> +}
>>>> +static void pt_pre_fence_func(struct dma_fence *fence,
>>>> + struct dma_fence_cb *cb)
>>>> +{
>>>> + struct drm_syncobj_signal_pt *signal_pt =
>>>> + container_of(cb, struct drm_syncobj_signal_pt, pre_pt_cb);
>>>> +
>>>> + if (signal_pt->signal_fence &&
>>>> + !dma_fence_is_signaled(signal_pt->pre_pt_base))
>>>> + return;
>>>> +
>>>> + pt_fence_cb(signal_pt);
>>>> +}
>>>> +
>>>> +static int drm_syncobj_timeline_signal_fence(struct drm_syncobj *syncobj,
>>>> + struct dma_fence *fence,
>>>> + u64 point)
>>>> +{
>>>> + struct drm_syncobj_signal_pt *signal_pt =
>>>> + kzalloc(sizeof(struct drm_syncobj_signal_pt), GFP_KERNEL);
>>>> + struct drm_syncobj_signal_pt *tail_pt;
>>>> + struct dma_fence *tail_pt_fence = NULL;
>>>> + int ret = 0;
>>>> +
>>>> + if (!signal_pt)
>>>> + return -ENOMEM;
>>>> + if (syncobj->syncobj_timeline.signal_point >= point) {
>>>> + DRM_WARN("A later signal is ready!");
>>>> + goto out;
>>>> + }
>>>> + if (fence)
>>>> + dma_fence_get(fence);
>>>> + spin_lock(&syncobj->lock);
>>>> + spin_lock_init(&signal_pt->base.lock);
>>>> + dma_fence_init(&signal_pt->base.base,
>>>> + &drm_syncobj_stub_fence_ops,
>>>> + &signal_pt->base.lock,
>>>> + syncobj->syncobj_timeline.timeline_context, point);
>>>> + signal_pt->signal_fence =
>>>> + rcu_dereference_protected(fence,
>>>> + lockdep_is_held(&fence->lock));
>>>> + if (!list_empty(&syncobj->syncobj_timeline.signal_pt_list)) {
>>>> + tail_pt = list_last_entry(&syncobj->syncobj_timeline.signal_pt_list,
>>>> + struct drm_syncobj_signal_pt, list);
>>>> + tail_pt_fence = &tail_pt->base.base;
>>>> + if (dma_fence_is_signaled(tail_pt_fence))
>>>> + tail_pt_fence = NULL;
>>>> + }
>>>> + if (tail_pt_fence)
>>>> + signal_pt->pre_pt_base =
>>>> + dma_fence_get(rcu_dereference_protected(tail_pt_fence,
>>>> + lockdep_is_held(&tail_pt_fence->lock)));
>>>> +
>>>> + signal_pt->value = point;
>>>> + syncobj->syncobj_timeline.signal_point = point;
>>>> + signal_pt->syncobj = syncobj;
>>>> + INIT_LIST_HEAD(&signal_pt->list);
>>>> + list_add_tail(&signal_pt->list, &syncobj->syncobj_timeline.signal_pt_list);
>>>> + spin_unlock(&syncobj->lock);
>>>> + drm_syncobj_timeline_signal_submission_fences(syncobj);
>>>> + /**
>>>> + * Every pt is depending on signal fence and previous pt fence, add
>>>> + * callbacks to them
>>>> + */
>>>> + if (!dma_fence_is_signaled(signal_pt->signal_fence))
>>>> + dma_fence_add_callback(signal_pt->signal_fence,
>>>> + &signal_pt->signal_cb,
>>>> + pt_signal_fence_func);
>>>> + else
>>>> + pt_signal_fence_func(signal_pt->signal_fence,
>>>> + &signal_pt->signal_cb);
>>>> + if (signal_pt->pre_pt_base && !dma_fence_is_signaled(signal_pt->pre_pt_base))
>>>> + dma_fence_add_callback(signal_pt->pre_pt_base,
>>>> + &signal_pt->pre_pt_cb,
>>>> + pt_pre_fence_func);
>>>> + else
>>>> + pt_pre_fence_func(signal_pt->pre_pt_base, &signal_pt->pre_pt_cb);
>>>> +
>>>> +
>>>> + return 0;
>>>> +out:
>>>> + kfree(signal_pt);
>>>> + return ret;
>>>> +}
>>>> +
>>>> +/**
>>>> + * drm_syncobj_signal_fence - place fence into a sync object.
>>>> + * @syncobj: Sync object to replace fence in
>>>> + * @fence: fence to install in sync file.
>>>> + *
>>>> + * This places the fence into normal or timeline sync object
>>>> + */
>>>> +void drm_syncobj_signal_fence(struct drm_syncobj *syncobj,
>>>> + struct dma_fence *fence,
>>>> + u64 point)
>>> This is a very confusion function name. Feels like
>>> drm_syncobj_timeline_signal_fence is rather misnamed. I think we should
>>> just extend replace_fence like you do with find_fence already.
>>>
>>>> +{
>>>> + if (syncobj->type == DRM_SYNCOBJ_TYPE_NORMAL)
>>>> + drm_syncobj_replace_fence(syncobj, fence);
>>>> + else if (syncobj->type == DRM_SYNCOBJ_TYPE_TIMELINE)
>>>> + drm_syncobj_timeline_signal_fence(syncobj, fence, point);
>>>> +}
>>>> +EXPORT_SYMBOL(drm_syncobj_signal_fence);
>>>> +
>>>> static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
>>>> {
>>>> struct drm_syncobj_stub_fence *fence;
>>>> @@ -205,12 +390,150 @@ static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
>>>> return 0;
>>>> }
>>>> +static struct drm_syncobj_wait_pt *
>>>> +drm_syncobj_timeline_lookup_wait_pt(struct drm_syncobj *syncobj, u64 point)
>>>> +{
>>>> + struct rb_node *node = syncobj->syncobj_timeline.wait_pt_tree.rb_node;
>>>> + struct drm_syncobj_wait_pt *wait_pt = NULL;
>>>> +
>>>> +
>>>> + spin_lock(&syncobj->lock);
>>>> + while(node) {
>>>> + int result = point - wait_pt->value;
>>>> +
>>>> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
>>>> + if (result < 0)
>>>> + node = node->rb_left;
>>>> + else if (result > 0)
>>>> + node = node->rb_right;
>>>> + else
>>>> + break;
>>>> + }
>>>> + spin_unlock(&syncobj->lock);
>>>> +
>>>> + return wait_pt;
>>>> +}
>>>> +
>>>> +static struct drm_syncobj_wait_pt *
>>>> +drm_syncobj_timeline_create_wait_pt(struct drm_syncobj *syncobj, u64 point)
>>>> +{
>>>> + struct drm_syncobj_wait_pt *wait_pt;
>>>> + struct rb_node **new = &(syncobj->syncobj_timeline.wait_pt_tree.rb_node), *parent = NULL;
>>>> +
>>>> + wait_pt = kzalloc(sizeof(*wait_pt), GFP_KERNEL);
>>>> + if (!wait_pt)
>>>> + return NULL;
>>>> + spin_lock_init(&wait_pt->base.lock);
>>>> + dma_fence_init(&wait_pt->base.base,
>>>> + &drm_syncobj_stub_fence_ops,
>>>> + &wait_pt->base.lock,
>>>> + syncobj->syncobj_timeline.timeline_context, point);
>>>> + wait_pt->submission_fence = NULL;
>>>> + /* check if the pt is already sumbitted, if yes, then don't need to
>>>> + * create submission fence, otherwise create it */
>>>> + if (point > syncobj->syncobj_timeline.signal_point) {
>>>> + wait_pt->submission_fence =
>>>> + kzalloc(sizeof(struct drm_syncobj_stub_fence),
>>>> + GFP_KERNEL);
>>>> + if (!wait_pt->submission_fence) {
>>>> + dma_fence_put(&wait_pt->base.base);
>>>> + return NULL;
>>>> + }
>>>> + spin_lock_init(&wait_pt->submission_fence->lock);
>>>> + dma_fence_init(&wait_pt->submission_fence->base,
>>>> + &drm_syncobj_stub_fence_ops,
>>>> + &wait_pt->submission_fence->lock,
>>>> + syncobj->syncobj_timeline.submission_context,
>>>> + point);
>>>> + }
>>>> + wait_pt->value = point;
>>>> +
>>>> + /* wait pt must be in an order, so that we can easily lookup and signal
>>>> + * it */
>>>> + spin_lock(&syncobj->lock);
>>>> + if (point <= syncobj->syncobj_timeline.timeline)
>>>> + dma_fence_signal(&wait_pt->base.base);
>>>> + if (wait_pt->submission_fence &&
>>>> + point <= syncobj->syncobj_timeline.signal_point)
>>>> + dma_fence_signal(&wait_pt->submission_fence->base);
>>>> + while(*new) {
>>>> + struct drm_syncobj_wait_pt *this =
>>>> + rb_entry(*new, struct drm_syncobj_wait_pt, node);
>>>> + int result = wait_pt->value - this->value;
>>>> +
>>>> + parent = *new;
>>>> + if (result < 0)
>>>> + new = &((*new)->rb_left);
>>>> + else if (result > 0)
>>>> + new = &((*new)->rb_right);
>>>> + else
>>>> + goto exist;
>>>> + }
>>>> +
>>>> + rb_link_node(&wait_pt->node, parent, new);
>>>> + rb_insert_color(&wait_pt->node, &syncobj->syncobj_timeline.wait_pt_tree);
>>>> + spin_unlock(&syncobj->lock);
>>>> + return wait_pt;
>>>> +exist:
>>>> + spin_unlock(&syncobj->lock);
>>>> + if (wait_pt->submission_fence)
>>>> + dma_fence_put(&wait_pt->submission_fence->base);
>>>> + dma_fence_put(&wait_pt->base.base);
>>>> + wait_pt = drm_syncobj_timeline_lookup_wait_pt(syncobj, point);
>>>> + return wait_pt;
>>>> +}
>>>> +
>>>> +static struct dma_fence *
>>>> +drm_syncobj_timeline_point_get(struct drm_syncobj *syncobj, u64 point, u64 flag)
>>>> +{
>>>> + struct drm_syncobj_wait_pt *wait_pt;
>>>> +
>>>> + /* already signaled, simply return a signaled stub fence */
>>>> + if (point <= syncobj->syncobj_timeline.timeline) {
>>>> + struct drm_syncobj_stub_fence *fence;
>>>> +
>>>> + fence = kzalloc(sizeof(*fence), GFP_KERNEL);
>>>> + if (fence == NULL)
>>>> + return NULL;
>>>> +
>>>> + spin_lock_init(&fence->lock);
>>>> + dma_fence_init(&fence->base, &drm_syncobj_stub_fence_ops,
>>>> + &fence->lock, 0, 0);
>>>> + dma_fence_signal(&fence->base);
>>>> + return &fence->base;
>>>> + }
>>>> +
>>>> + /* check if the wait pt exists */
>>>> + wait_pt = drm_syncobj_timeline_lookup_wait_pt(syncobj, point);
>>>> + if (!wait_pt) {
>>>> + /* This is a new wait pt, so create it */
>>>> + wait_pt = drm_syncobj_timeline_create_wait_pt(syncobj, point);
>>>> + if (!wait_pt)
>>>> + return NULL;
>>>> + }
>>>> + if (wait_pt) {
>>>> + struct dma_fence *fence;
>>>> + if (wait_pt->submission_fence) {
>>>> + if (flag & DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT)
>>>> + dma_fence_wait(&wait_pt->submission_fence->base, true);
>>>> + else if (!dma_fence_is_signaled(&wait_pt->submission_fence->base))
>>>> + return NULL;
>>>> + }
>>>> + rcu_read_lock();
>>>> + fence = dma_fence_get_rcu(&wait_pt->base.base);
>>>> + rcu_read_unlock();
>>>> + return fence;
>>>> + }
>>>> + return NULL;
>>>> +}
>>>> +
>>>> /**
>>>> * drm_syncobj_find_fence - lookup and reference the fence in a sync object
>>>> * @file_private: drm file private pointer
>>>> * @handle: sync object handle to lookup.
>>>> * @fence: out parameter for the fence
>>>> + * @point: timeline point
>>>> *
>>>> * This is just a convenience function that combines drm_syncobj_find() and
>>>> * drm_syncobj_fence_get().
>>>> @@ -221,7 +544,8 @@ static int drm_syncobj_assign_null_handle(struct drm_syncobj *syncobj)
>>>> */
>>>> int drm_syncobj_find_fence(struct drm_file *file_private,
>>>> u32 handle,
>>>> - struct dma_fence **fence)
>>>> + struct dma_fence **fence,
>>>> + u64 point)
>>>> {
>>>> struct drm_syncobj *syncobj = drm_syncobj_find(file_private, handle);
>>>> int ret = 0;
>>>> @@ -229,7 +553,15 @@ int drm_syncobj_find_fence(struct drm_file *file_private,
>>>> if (!syncobj)
>>>> return -ENOENT;
>>>> - *fence = drm_syncobj_fence_get(syncobj);
>>>> + if (syncobj->type == DRM_SYNCOBJ_TYPE_NORMAL) {
>>>> + *fence = drm_syncobj_fence_get(syncobj);
>>> Needs at least a WARN_ON(point != 0) here, since I'd say that would be a
>>> driver bug. Or userspace bug, in which case we need to return -EINVAL;
>>>
>>> Hard to tell without the driver implementation.
>>>
>>>> + }else if (syncobj->type == DRM_SYNCOBJ_TYPE_TIMELINE) {
>>>> + *fence = drm_syncobj_timeline_point_get(syncobj, point,
>>>> + DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT);
>>>> + } else {
>>>> + DRM_ERROR("invalid syncobj type\n");
>>>> + return -EINVAL;
>>>> + }
>>>> if (!*fence) {
>>>> ret = -EINVAL;
>>>> }
>>>> @@ -238,6 +570,35 @@ int drm_syncobj_find_fence(struct drm_file *file_private,
>>>> }
>>>> EXPORT_SYMBOL(drm_syncobj_find_fence);
>>>> +static void drm_syncobj_timeline_fini(struct drm_syncobj *syncobj,
>>>> + struct drm_syncobj_timeline *syncobj_timeline)
>>>> +{
>>>> + struct rb_node *node = NULL;
>>>> + struct drm_syncobj_wait_pt *wait_pt = NULL;
>>>> + struct drm_syncobj_signal_pt *signal_pt = NULL, *tmp;
>>>> +
>>>> + spin_lock(&syncobj->lock);
>>>> + for(node = rb_first(&syncobj_timeline->wait_pt_tree);
>>>> + node != NULL; ) {
>>>> + wait_pt = rb_entry(node, struct drm_syncobj_wait_pt, node);
>>>> + node = rb_next(node);
>>>> + rb_erase(&wait_pt->node,
>>>> + &syncobj_timeline->wait_pt_tree);
>>>> + RB_CLEAR_NODE(&wait_pt->node);
>>>> + if (wait_pt->submission_fence)
>>>> + dma_fence_put(&wait_pt->submission_fence->base);
>>>> + /* kfree(wait_pt) is excuted by fence put */
>>>> + dma_fence_put(&wait_pt->base.base);
>>>> + }
>>>> + list_for_each_entry_safe(signal_pt, tmp,
>>>> + &syncobj_timeline->signal_pt_list, list) {
>>>> + list_del(&signal_pt->list);
>>>> + dma_fence_put(signal_pt->signal_fence);
>>>> + dma_fence_put(signal_pt->pre_pt_base);
>>>> + dma_fence_put(&signal_pt->base.base);
>>>> + }
>>>> + spin_unlock(&syncobj->lock);
>>>> +}
>>>> /**
>>>> * drm_syncobj_free - free a sync object.
>>>> * @kref: kref to free.
>>>> @@ -250,10 +611,22 @@ void drm_syncobj_free(struct kref *kref)
>>>> struct drm_syncobj,
>>>> refcount);
>>>> drm_syncobj_replace_fence(syncobj, NULL);
>>>> + drm_syncobj_timeline_fini(syncobj, &syncobj->syncobj_timeline);
>>>> kfree(syncobj);
>>>> }
>>>> EXPORT_SYMBOL(drm_syncobj_free);
>>>> +static void drm_syncobj_timeline_init(struct drm_syncobj_timeline
>>>> + *syncobj_timeline)
>>>> +{
>>>> + syncobj_timeline->timeline_context = dma_fence_context_alloc(1);
>>>> + syncobj_timeline->submission_context = dma_fence_context_alloc(1);
>>>> + syncobj_timeline->timeline = 0;
>>>> + syncobj_timeline->signal_point = 0;
>>>> +
>>>> + syncobj_timeline->wait_pt_tree = RB_ROOT;
>>>> + INIT_LIST_HEAD(&syncobj_timeline->signal_pt_list);
>>>> +}
>>>> /**
>>>> * drm_syncobj_create - create a new syncobj
>>>> * @out_syncobj: returned syncobj
>>>> @@ -279,6 +652,12 @@ int drm_syncobj_create(struct drm_syncobj **out_syncobj, uint32_t flags,
>>>> kref_init(&syncobj->refcount);
>>>> INIT_LIST_HEAD(&syncobj->cb_list);
>>>> spin_lock_init(&syncobj->lock);
>>>> + if (flags & DRM_SYNCOBJ_CREATE_TYPE_TIMELINE) {
>>>> + syncobj->type = DRM_SYNCOBJ_TYPE_TIMELINE;
>>>> + drm_syncobj_timeline_init(&syncobj->syncobj_timeline);
>>>> + } else {
>>>> + syncobj->type = DRM_SYNCOBJ_TYPE_NORMAL;
>>>> + }
>>>> if (flags & DRM_SYNCOBJ_CREATE_SIGNALED) {
>>>> ret = drm_syncobj_assign_null_handle(syncobj);
>>>> @@ -491,7 +870,7 @@ static int drm_syncobj_export_sync_file(struct drm_file *file_private,
>>>> if (fd < 0)
>>>> return fd;
>>>> - ret = drm_syncobj_find_fence(file_private, handle, &fence);
>>>> + ret = drm_syncobj_find_fence(file_private, handle, &fence, 0);
>>>> if (ret)
>>>> goto err_put_fd;
>>>> diff --git a/drivers/gpu/drm/v3d/v3d_gem.c b/drivers/gpu/drm/v3d/v3d_gem.c
>>>> index 9029590267aa..f24c3eccb4d5 100644
>>>> --- a/drivers/gpu/drm/v3d/v3d_gem.c
>>>> +++ b/drivers/gpu/drm/v3d/v3d_gem.c
>>>> @@ -521,12 +521,12 @@ v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
>>>> kref_init(&exec->refcount);
>>>> ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl,
>>>> - &exec->bin.in_fence);
>>>> + &exec->bin.in_fence, 0);
>>>> if (ret == -EINVAL)
>>>> goto fail;
>>>> ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl,
>>>> - &exec->render.in_fence);
>>>> + &exec->render.in_fence, 0);
>>>> if (ret == -EINVAL)
>>>> goto fail;
>>>> diff --git a/drivers/gpu/drm/vc4/vc4_gem.c b/drivers/gpu/drm/vc4/vc4_gem.c
>>>> index 7910b9acedd6..f7b4971342e8 100644
>>>> --- a/drivers/gpu/drm/vc4/vc4_gem.c
>>>> +++ b/drivers/gpu/drm/vc4/vc4_gem.c
>>>> @@ -1173,7 +1173,7 @@ vc4_submit_cl_ioctl(struct drm_device *dev, void *data,
>>>> if (args->in_sync) {
>>>> ret = drm_syncobj_find_fence(file_priv, args->in_sync,
>>>> - &in_fence);
>>>> + &in_fence, 0);
>>>> if (ret)
>>>> goto fail;
>>>> diff --git a/include/drm/drm_syncobj.h b/include/drm/drm_syncobj.h
>>>> index b04c492ddbb5..b6e193c6cc9a 100644
>>>> --- a/include/drm/drm_syncobj.h
>>>> +++ b/include/drm/drm_syncobj.h
>>>> @@ -54,6 +54,41 @@ const struct dma_fence_ops drm_syncobj_stub_fence_ops = {
>>>> .release = NULL,
>>>> };
>>>> +enum drm_syncobj_type {
>>>> + DRM_SYNCOBJ_TYPE_NORMAL,
>>>> + DRM_SYNCOBJ_TYPE_TIMELINE
>>>> +};
>>>> +
>>>> +struct drm_syncobj;
>>>> +struct drm_syncobj_wait_pt {
>>>> + struct drm_syncobj_stub_fence base;
>>>> + struct drm_syncobj_stub_fence *submission_fence;
>>>> + u64 value;
>>>> + struct rb_node node;
>>>> +};
>>>> +struct drm_syncobj_signal_pt {
>>>> + struct drm_syncobj_stub_fence base;
>>>> + struct dma_fence *signal_fence;
>>>> + struct dma_fence *pre_pt_base;
>>>> + struct dma_fence_cb signal_cb;
>>>> + struct dma_fence_cb pre_pt_cb;
>>>> + struct drm_syncobj *syncobj;
>>>> + u64 value;
>>>> + struct list_head list;
>>>> +};
>>> The above internal structs shouldn't be in the public header.
>>>
>>> Some tiny comments about what each piece is for would also go a long way
>>> towards me being able to understand things.
>>>
>>> Thanks, Daniel
>>>
>>>> +struct drm_syncobj_timeline {
>>>> + u64 timeline_context;
>>>> + u64 submission_context;
>>>> + /**
>>>> + * @timeline: syncobj timeline
>>>> + */
>>>> + u64 timeline;
>>>> + u64 signal_point;
>>>> +
>>>> +
>>>> + struct rb_root wait_pt_tree;
>>>> + struct list_head signal_pt_list;
>>>> +};
>>>> /**
>>>> * struct drm_syncobj - sync object.
>>>> *
>>>> @@ -64,6 +99,11 @@ struct drm_syncobj {
>>>> * @refcount: Reference count of this object.
>>>> */
>>>> struct kref refcount;
>>>> + /**
>>>> + * @type: indicate syncobj type
>>>> + */
>>>> + enum drm_syncobj_type type;
>>>> + struct drm_syncobj_timeline syncobj_timeline;
>>>> /**
>>>> * @fence:
>>>> * NULL or a pointer to the fence bound to this object.
>>>> @@ -162,9 +202,12 @@ void drm_syncobj_remove_callback(struct drm_syncobj *syncobj,
>>>> struct drm_syncobj_cb *cb);
>>>> void drm_syncobj_replace_fence(struct drm_syncobj *syncobj,
>>>> struct dma_fence *fence);
>>>> +void drm_syncobj_signal_fence(struct drm_syncobj *syncobj,
>>>> + struct dma_fence *fence,
>>>> + u64 point);
>>>> int drm_syncobj_find_fence(struct drm_file *file_private,
>>>> u32 handle,
>>>> - struct dma_fence **fence);
>>>> + struct dma_fence **fence, u64 point);
>>>> void drm_syncobj_free(struct kref *kref);
>>>> int drm_syncobj_create(struct drm_syncobj **out_syncobj, uint32_t flags,
>>>> struct dma_fence *fence);
>>>> diff --git a/include/uapi/drm/drm.h b/include/uapi/drm/drm.h
>>>> index 300f336633f2..71e6cd1c88f8 100644
>>>> --- a/include/uapi/drm/drm.h
>>>> +++ b/include/uapi/drm/drm.h
>>>> @@ -717,6 +717,8 @@ struct drm_prime_handle {
>>>> struct drm_syncobj_create {
>>>> __u32 handle;
>>>> #define DRM_SYNCOBJ_CREATE_SIGNALED (1 << 0)
>>>> +#define DRM_SYNCOBJ_CREATE_TYPE_NORMAL (1 << 1)
>>>> +#define DRM_SYNCOBJ_CREATE_TYPE_TIMELINE (1 << 2)
>>>> __u32 flags;
>>>> };
>>>> @@ -734,7 +736,6 @@ struct drm_syncobj_handle {
>>>> __s32 fd;
>>>> __u32 pad;
>>>> };
>>>> -
>>>> #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_ALL (1 << 0)
>>>> #define DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT (1 << 1)
>>>> struct drm_syncobj_wait {
>>>> --
>>>> 2.14.1
>>>>
>>>> _______________________________________________
>>>> dri-devel mailing list
>>>> dri-devel at lists.freedesktop.org
>>>> https://lists.freedesktop.org/mailman/listinfo/dri-devel
More information about the amd-gfx
mailing list