[PATCH] drm/amdgpu: Relocate some definitions
Amber Lin
Amber.Lin at amd.com
Tue Aug 28 20:27:24 UTC 2018
Move some KFD-related (but used in amdgpu_drv.c) definitions from
kfd_priv.h to kgd_kfd_interface.h so we don't need to include kfd_priv.h
in amdgpu_drv.c. This fixes a build failure when AMDGPU is enabled but
MMU_NOTIFIER is not.
This patch also disables KFD-related module options when HSA_AMD is not
enabled.
Signed-off-by: Amber Lin <Amber.Lin at amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 20 +++++++++---------
drivers/gpu/drm/amd/amdkfd/kfd_priv.h | 28 -------------------------
drivers/gpu/drm/amd/include/kgd_kfd_interface.h | 28 +++++++++++++++++++++++++
3 files changed, 38 insertions(+), 38 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index dd6d8b1..e4d0d72 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -39,7 +39,6 @@
#include "amdgpu_gem.h"
#include "amdgpu_amdkfd.h"
-#include "kfd_priv.h"
/*
* KMS wrapper.
@@ -128,15 +127,6 @@ int amdgpu_compute_multipipe = -1;
int amdgpu_gpu_recovery = -1; /* auto */
int amdgpu_emu_mode = 0;
uint amdgpu_smu_memory_pool_size = 0;
-/* KFD parameters */
-int sched_policy = KFD_SCHED_POLICY_HWS;
-int hws_max_conc_proc = 8;
-int cwsr_enable = 1;
-int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
-int send_sigterm;
-int debug_largebar;
-int ignore_crat;
-int vega10_noretry;
/**
* DOC: vramlimit (int)
@@ -542,12 +532,14 @@ MODULE_PARM_DESC(smu_memory_pool_size,
"0x1 = 256Mbyte, 0x2 = 512Mbyte, 0x4 = 1 Gbyte, 0x8 = 2GByte");
module_param_named(smu_memory_pool_size, amdgpu_smu_memory_pool_size, uint, 0444);
+#ifdef CONFIG_HSA_AMD
/**
* DOC: sched_policy (int)
* Set scheduling policy. Default is HWS(hardware scheduling) with over-subscription.
* Setting 1 disables over-subscription. Setting 2 disables HWS and statically
* assigns queues to HQDs.
*/
+int sched_policy = KFD_SCHED_POLICY_HWS;
module_param(sched_policy, int, 0444);
MODULE_PARM_DESC(sched_policy,
"Scheduling policy (0 = HWS (Default), 1 = HWS without over-subscription, 2 = Non-HWS (Used for debugging only)");
@@ -557,6 +549,7 @@ MODULE_PARM_DESC(sched_policy,
* Maximum number of processes that HWS can schedule concurrently. The maximum is the
* number of VMIDs assigned to the HWS, which is also the default.
*/
+int hws_max_conc_proc = 8;
module_param(hws_max_conc_proc, int, 0444);
MODULE_PARM_DESC(hws_max_conc_proc,
"Max # processes HWS can execute concurrently when sched_policy=0 (0 = no concurrency, #VMIDs for KFD = Maximum(default))");
@@ -567,6 +560,7 @@ MODULE_PARM_DESC(hws_max_conc_proc,
* the middle of a compute wave. Default is 1 to enable this feature. Setting 0
* disables it.
*/
+int cwsr_enable = 1;
module_param(cwsr_enable, int, 0444);
MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
@@ -575,6 +569,7 @@ MODULE_PARM_DESC(cwsr_enable, "CWSR enable (0 = Off, 1 = On (Default))");
* Maximum number of queues per device. Valid setting is between 1 and 4096. Default
* is 4096.
*/
+int max_num_of_queues_per_device = KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT;
module_param(max_num_of_queues_per_device, int, 0444);
MODULE_PARM_DESC(max_num_of_queues_per_device,
"Maximum number of supported queues per device (1 = Minimum, 4096 = default)");
@@ -584,6 +579,7 @@ MODULE_PARM_DESC(max_num_of_queues_per_device,
* Send sigterm to HSA process on unhandled exceptions. Default is not to send sigterm
* but just print errors on dmesg. Setting 1 enables sending sigterm.
*/
+int send_sigterm;
module_param(send_sigterm, int, 0444);
MODULE_PARM_DESC(send_sigterm,
"Send sigterm to HSA process on unhandled exception (0 = disable, 1 = enable)");
@@ -595,6 +591,7 @@ MODULE_PARM_DESC(send_sigterm,
* size, usually 256MB.
* Default value is 0, diabled.
*/
+int debug_largebar;
module_param(debug_largebar, int, 0444);
MODULE_PARM_DESC(debug_largebar,
"Debug large-bar flag used to simulate large-bar capability on non-large bar machine (0 = disable, 1 = enable)");
@@ -605,6 +602,7 @@ MODULE_PARM_DESC(debug_largebar,
* table to get information about AMD APUs. This option can serve as a workaround on
* systems with a broken CRAT table.
*/
+int ignore_crat;
module_param(ignore_crat, int, 0444);
MODULE_PARM_DESC(ignore_crat,
"Ignore CRAT table during KFD initialization (0 = use CRAT (default), 1 = ignore CRAT)");
@@ -615,9 +613,11 @@ MODULE_PARM_DESC(ignore_crat,
* Setting 1 disables retry.
* Retry is needed for recoverable page faults.
*/
+int vega10_noretry;
module_param_named(noretry, vega10_noretry, int, 0644);
MODULE_PARM_DESC(noretry,
"Set sh_mem_config.retry_disable on Vega10 (0 = retry enabled (default), 1 = retry disabled)");
+#endif
static const struct pci_device_id pciidlist[] = {
#ifdef CONFIG_DRM_AMDGPU_SI
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
index 5e3990b..2df3ed4 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_priv.h
@@ -103,7 +103,6 @@
*/
extern int max_num_of_queues_per_device;
-#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096
#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE \
(KFD_MAX_NUM_OF_PROCESSES * \
KFD_MAX_NUM_OF_QUEUES_PER_PROCESS)
@@ -144,33 +143,6 @@ extern int ignore_crat;
*/
extern int vega10_noretry;
-/**
- * enum kfd_sched_policy
- *
- * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp)
- * scheduling. In this scheduling mode we're using the firmware code to
- * schedule the user mode queues and kernel queues such as HIQ and DIQ.
- * the HIQ queue is used as a special queue that dispatches the configuration
- * to the cp and the user mode queues list that are currently running.
- * the DIQ queue is a debugging queue that dispatches debugging commands to the
- * firmware.
- * in this scheduling mode user mode queues over subscription feature is
- * enabled.
- *
- * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over
- * subscription feature disabled.
- *
- * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly
- * set the command processor registers and sets the queues "manually". This
- * mode is used *ONLY* for debugging proposes.
- *
- */
-enum kfd_sched_policy {
- KFD_SCHED_POLICY_HWS = 0,
- KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION,
- KFD_SCHED_POLICY_NO_HWS
-};
-
enum cache_policy {
cache_policy_coherent,
cache_policy_noncoherent
diff --git a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
index 5733fbe..526d4bd 100644
--- a/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
+++ b/drivers/gpu/drm/amd/include/kgd_kfd_interface.h
@@ -87,6 +87,33 @@ enum kgd_engine_type {
KGD_ENGINE_MAX
};
+/**
+ * enum kfd_sched_policy
+ *
+ * @KFD_SCHED_POLICY_HWS: H/W scheduling policy known as command processor (cp)
+ * scheduling. In this scheduling mode we're using the firmware code to
+ * schedule the user mode queues and kernel queues such as HIQ and DIQ.
+ * the HIQ queue is used as a special queue that dispatches the configuration
+ * to the cp and the user mode queues list that are currently running.
+ * the DIQ queue is a debugging queue that dispatches debugging commands to the
+ * firmware.
+ * in this scheduling mode user mode queues over subscription feature is
+ * enabled.
+ *
+ * @KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION: The same as above but the over
+ * subscription feature disabled.
+ *
+ * @KFD_SCHED_POLICY_NO_HWS: no H/W scheduling policy is a mode which directly
+ * set the command processor registers and sets the queues "manually". This
+ * mode is used *ONLY* for debugging proposes.
+ *
+ */
+enum kfd_sched_policy {
+ KFD_SCHED_POLICY_HWS = 0,
+ KFD_SCHED_POLICY_HWS_NO_OVERSUBSCRIPTION,
+ KFD_SCHED_POLICY_NO_HWS
+};
+
struct kgd2kfd_shared_resources {
/* Bit n == 1 means VMID n is available for KFD. */
unsigned int compute_vmid_bitmap;
@@ -142,6 +169,7 @@ struct tile_config {
uint32_t num_ranks;
};
+#define KFD_MAX_NUM_OF_QUEUES_PER_DEVICE_DEFAULT 4096
/*
* Allocation flag domains
--
2.7.4
More information about the amd-gfx
mailing list