[PATCH] drm/amd/powerplay: added vega20 overdrive support
Alex Deucher
alexdeucher at gmail.com
Fri Aug 31 04:19:27 UTC 2018
On Thu, Aug 30, 2018 at 11:47 PM Quan, Evan <Evan.Quan at amd.com> wrote:
>
> > If so, we should separate them and
> > use something like my earlier proposal where we separate the voltage
> > curve from the clk settings.
> There is one more thing. Previously these OD APIs mix clock and voltage settings together.
> That is "s/m level clock voltage". Do you think whether we should update the usage on vega20 as:
> "s level clock" --> set fmin/fmax
> "m level clock" --> set Umax
> "vc level clock voltage" --> Newly added, set freq/voltage curve?
Yes. how about this?
OD_SCLK:
0: clock_value
1: clock_value
OD_MCLK:
1: clock_value
OD_VDDC_CURVE:
0: clock_value voltage_offset
1: clock_value voltage_offset
2: clock_value voltage_offset
OD_RANGE:
SCLK: clock_value clock_value
MCLK: clock_value clock_value
VDDC_CURVE_SCLK[0]: clock_value clock_value
VDDC_CURVE_VOFF[0]: voltage_offset voltage_offset
VDDC_CURVE_SCLK[1]: clock_value clock_value
VDDC_CURVE_VOFF[1]: voltage_offset voltage_offset
VDDC_CURVE_SCLK[2]: clock_value clock_value
VDDC_CURVE_VOFF[2]: voltage_offset voltage_offset
OD_SCLK:
0: 150Mhz
1: 1000Mhz
OD_MCLK:
1: 800Mhz
OD_VDDC_CURVE:
0: 200Mhz 0mV
1: 500Mhz 0mV
2: 1000Mhz 0mV
OD_RANGE:
SCLK: 100Mhz 1100Mhz
MCLK: 200Mhz 900Mhz
VDDC_CURVE_SCLK[0]: 100Mhz 300Mhz
VDDC_CURVE_VOFF[0]: -10mV +10mV
VDDC_CURVE_SCLK[1]: 400Mhz 700Mhz
VDDC_CURVE_VOFF[1]: -10mV +10mV
VDDC_CURVE_SCLK[2]: 800Mhz 1000Mhz
VDDC_CURVE_VOFF[2]: -10mV +10mV
Alex
>
> Regards,
> Evan
> > -----Original Message-----
> > From: Quan, Evan
> > Sent: 2018年8月31日 10:40
> > To: 'Alex Deucher' <alexdeucher at gmail.com>
> > Cc: amd-gfx list <amd-gfx at lists.freedesktop.org>; Deucher, Alexander
> > <Alexander.Deucher at amd.com>; Zhu, Rex <Rex.Zhu at amd.com>
> > Subject: RE: [PATCH] drm/amd/powerplay: added vega20 overdrive support
> >
> > Hi Alex,
> >
> > comment inline
> >
> > > -----Original Message-----
> > > From: Alex Deucher <alexdeucher at gmail.com>
> > > Sent: 2018年8月30日 23:25
> > > To: Quan, Evan <Evan.Quan at amd.com>
> > > Cc: amd-gfx list <amd-gfx at lists.freedesktop.org>; Deucher, Alexander
> > > <Alexander.Deucher at amd.com>; Zhu, Rex <Rex.Zhu at amd.com>
> > > Subject: Re: [PATCH] drm/amd/powerplay: added vega20 overdrive
> > support
> > >
> > > On Thu, Aug 30, 2018 at 1:56 AM Quan, Evan <Evan.Quan at amd.com>
> > wrote:
> > > >
> > > > Hi Alex,
> > > >
> > > > OK, I got your concern. Then how about the followings?
> > > >
> > > > If user want to change the FMin and FMax, they just need to pass in
> > > > the
> > > new clock values.
> > > > E.g, "s 0 350 10" will update the Fmin to 350Mhz and increase its
> > > > voltage by
> > > 10mV.
> > > > "s 7 1000 -10" will update the Fmax to 1000Mhz and decrease voltage
> > > > by
> > > 10mV.
> > >
> > > Is there ever a case where you would want different values for
> > > Fmin/Fmax and Freq1/Freq3? I'm not entirely sure how the voltage
> > > curve and the min/max are related. If so, we should separate them and
> > > use something like my earlier proposal where we separate the voltage
> > > curve from the clk settings.
> > [Quan, Evan] Yes, it's OK to have different values for Freq1/Freq3 from
> > Fmin/Fmax.
> > > Also it might be more consistent to make the whole thing offset based
> > > rather than a mix of absolute values and offsets. E.g., "s 0 50 10"
> > > would increase the fmin by 50 Mhz and increase its voltage by 10 mV.
> > > "s 7
> > > 100 -10" would increase fmax by
> > > 100 Mhz and decrease voltage by 10mV.
> > [Quan, Evan] Make sense to me.
> > > OD_RANGE would give the the
> > > absolute clk and voltage ranges for each setting. If we went this
> > > way, we'd need to also print the default settings as well, otherwise
> > > you don't have a reference point. Maybe something like:
> > > OD_SCLK:
> > > 0: 0Mhz 0mV (100Mhz 900mV)
> > > 4: 0Mhz 0mV (200Mhz 1000mV)
> > > 7: 0Mhz 0mV (300Mhz 1100mV)
> > > OD_MCLK:
> > > 3: 0Mhz 0mV (500Mhz 1100mV)
> > > ...
> > > So in this case, the first two items would be the offset you want to
> > > apply and the last two items are the current absolute settings.
> > > Alternatively would could use absolute values for everything and
> > > convert to offsets for voltage in the driver. E.g.,
> > > OD_SCLK:
> > > 0: 100Mhz 900mV
> > > 4: 200Mhz 1000mV
> > > 7: 300Mhz 1100mV
> > > OD_MCLK:
> > > 3: 500Mhz 1100mV
> > > ...
> > > Then it would work pretty much the same as the previous interface.
> > >
> > [Quan, Evan] No, we cannot know the absolute voltage for each level.
> > There is no such information(interface) provided by SMC fw.
> > > Alex
> > >
> > >
> > Regards,
> > Evan
> > > >
> > > > Same for MCLK except the voltage offset passed in takes no effect.
> > > >
> > > > OD_SCLK:
> > > > 0: 0Mhz 0mV
> > > > 4: 0Mhz 0mV
> > > > 7: 0Mhz 0mV
> > > >
> > > > OD_MCLK:
> > > > 3: 0Mhz 0mV
> > > >
> > > > OD_RANGE:
> > > > SCLK[0]: 0Mhz 0Mhz
> > > > VDDGFX[0]: 0mV 0mV
> > > > SCLK[4]: 0Mhz 0Mhz
> > > > VDDGFX[4]: 0mV 0mV
> > > > SCLK[7]: 0Mhz 0Mhz
> > > > VDDGFX[7]: 0mV 0mV
> > > >
> > > > MCLK[3]: 0Mhz 0Mhz
> > > > VDDMEM[3]: 0mV 0mV
> > > >
> > > >
> > > > Regard,
> > > > Evan
> > > >
> > > > > -----Original Message-----
> > > > > From: Alex Deucher <alexdeucher at gmail.com>
> > > > > Sent: 2018年8月30日 13:06
> > > > > To: Quan, Evan <Evan.Quan at amd.com>
> > > > > Cc: amd-gfx list <amd-gfx at lists.freedesktop.org>; Deucher,
> > > > > Alexander <Alexander.Deucher at amd.com>; Zhu, Rex
> > <Rex.Zhu at amd.com>
> > > > > Subject: Re: [PATCH] drm/amd/powerplay: added vega20 overdrive
> > > > > support
> > > > >
> > > > > On Wed, Aug 29, 2018 at 11:54 PM Quan, Evan <Evan.Quan at amd.com>
> > > > > wrote:
> > > > > >
> > > > > > Hi Alex,
> > > > > >
> > > > > >
> > > > > > >What about the min/max sclk? Do the curve values take that into
> > > > > > >account? What about max mclk?
> > > > > >
> > > > > > Voltage curve does not take these into consideration. And the
> > > > > > max sclk and
> > > > > mclk can be set through existing sysfs interface pp_sclk_od and
> > > pp_mclk_od.
> > > > > For min sclk, as i know there is no interface to get it set.
> > > > > >
> > > > >
> > > > > I'd prefer to allow adjusting min and max clocks via this
> > > > > interface for consistency with vega10 and smu7. I'd like to
> > > > > deprecate the pp_sclk_od and pp_mclk_od interfaces because the are
> > > > > percentage based and don't support underclocking.
> > > > >
> > > > > Alex
> > > > >
> > > > > >
> > > > > > > Are negative offsets supported?
> > > > > > Sure.
> > > > > >
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Evan
> > > > > >
> > > > > >
> > > > > > ________________________________
> > > > > > From: Alex Deucher <alexdeucher at gmail.com>
> > > > > > Sent: Thursday, August 30, 2018 12:25:35 AM
> > > > > > To: Quan, Evan
> > > > > > Cc: amd-gfx list; Deucher, Alexander; Zhu, Rex
> > > > > > Subject: Re: [PATCH] drm/amd/powerplay: added vega20 overdrive
> > > > > support
> > > > > >
> > > > > > On Wed, Aug 29, 2018 at 5:13 AM Evan Quan <evan.quan at amd.com>
> > > > > wrote:
> > > > > > >
> > > > > > > Vega20 supports only sclk voltage overdrive. And user can only
> > > > > > > tell three groups of <frequency, voltage_offset>. SMU firmware
> > > > > > > will recalculate the frequency/voltage curve. Other
> > > > > > > intermediate levles will be stretched/shrunk accordingly.
> > > > > > >
> > > > > >
> > > > > > What about the min/max sclk? Do the curve values take that into
> > > > > > account? What about max mclk?
> > > > > >
> > > > > > > Change-Id: I403cb38a95863db664cf06d030ac42a19bff6b33
> > > > > > > Signed-off-by: Evan Quan <evan.quan at amd.com>
> > > > > > > ---
> > > > > > > drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c | 26 +++
> > > > > > > .../drm/amd/powerplay/hwmgr/vega20_hwmgr.c | 165
> > > > > +++++++++++++++++-
> > > > > > > .../drm/amd/powerplay/hwmgr/vega20_hwmgr.h | 2 +
> > > > > > > 3 files changed, 192 insertions(+), 1 deletion(-)
> > > > > > >
> > > > > > > diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> > > > > > > b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> > > > > > > index e2577518b9c6..6e0c8f583521 100644
> > > > > > > --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> > > > > > > +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c
> > > > > > > @@ -474,6 +474,8 @@ static ssize_t amdgpu_set_pp_table(struct
> > > > > > > device
> > > > > *dev,
> > > > > > > * in each power level within a power state. The
> > > > > > > pp_od_clk_voltage is
> > > > > used for
> > > > > > > * this.
> > > > > > > *
> > > > > > > + * < For Vega10 and previous ASICs >
> > > > > > > + *
> > > > > > > * Reading the file will display:
> > > > > > > *
> > > > > > > * - a list of engine clock levels and voltages labeled
> > > > > > > OD_SCLK @@
> > > > > > > -491,6 +493,30 @@ static ssize_t amdgpu_set_pp_table(struct
> > > > > > > device
> > > > > *dev,
> > > > > > > * "c" (commit) to the file to commit your changes. If you
> > > > > > > want to reset
> > > > > to the
> > > > > > > * default power levels, write "r" (reset) to the file to reset them.
> > > > > > > *
> > > > > > > + *
> > > > > > > + * < For Vega20 >
> > > > > > > + *
> > > > > > > + * Reading the file will display:
> > > > > > > + *
> > > > > > > + * - three groups of engine clock and voltage offset labeled
> > > > > > > + OD_SCLK
> > > > > > > + *
> > > > > > > + * - a list of valid ranges for above three groups of sclk
> > > > > > > + and voltage
> > > offset
> > > > > > > + * labeled OD_RANGE
> > > > > > > + *
> > > > > > > + * To manually adjust these settings:
> > > > > > > + *
> > > > > > > + * - First select manual using
> > > > > > > + power_dpm_force_performance_level
> > > > > > > + *
> > > > > > > + * - Enter a new value for each group by writing a string that
> > contains
> > > > > > > + * "s group_index clock voltage_offset" to the file. E.g., "s 0 500
> > 20"
> > > > > > > + * will update group1 sclk to be 500 MHz with voltage increased
> > > 20mV
> > > > > > > + *
> > > > > >
> > > > > > Are negative offsets supported?
> > > > > >
> > > > > > Alex
> > > > > >
> > > > > > > + * - When you have edited all of the states as needed, write "c"
> > > (commit)
> > > > > > > + * to the file to commit your changes
> > > > > > > + *
> > > > > > > + * - If you want to reset to the default power levels, write "r"
> > (reset)
> > > > > > > + * to the file to reset them
> > > > > > > + *
> > > > > > > */
> > > > > > >
> > > > > > > static ssize_t amdgpu_set_pp_od_clk_voltage(struct device
> > > > > > > *dev, diff --git
> > > a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> > > > > > > b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> > > > > > > index ececa2f7fe5f..9f6e070a76e0 100644
> > > > > > > --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> > > > > > > +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.c
> > > > > > > @@ -1096,6 +1096,13 @@ static int
> > > > > vega20_od8_initialize_default_settings(
> > > > > > > }
> > > > > > > }
> > > > > > >
> > > > > > > + ret = vega20_copy_table_from_smc(hwmgr,
> > > > > > > + (uint8_t *)(&data->od_table),
> > > > > > > + TABLE_OVERDRIVE);
> > > > > > > + PP_ASSERT_WITH_CODE(!ret,
> > > > > > > + "Failed to export over drive table!",
> > > > > > > + return ret);
> > > > > > > +
> > > > > > > return 0;
> > > > > > > }
> > > > > > >
> > > > > > > @@ -2506,11 +2513,112 @@ static int
> > > > > vega20_set_watermarks_for_clocks_ranges(struct pp_hwmgr *hwmgr,
> > > > > > > return 0;
> > > > > > > }
> > > > > > >
> > > > > > > +static int vega20_odn_edit_dpm_table(struct pp_hwmgr *hwmgr,
> > > > > > > + enum PP_OD_DPM_TABLE_COMMAND type,
> > > > > > > + long *input, uint32_t
> > > > > > > +size) {
> > > > > > > + struct vega20_hwmgr *data =
> > > > > > > + (struct vega20_hwmgr *)(hwmgr->backend);
> > > > > > > + struct vega20_od8_single_setting *od8_settings =
> > > > > > > + data->od8_settings.od8_settings_array;
> > > > > > > + OverDriveTable_t od_table;
> > > > > > > + int32_t input_index, input_clk, input_vol, i;
> > > > > > > + int ret = 0;
> > > > > > > +
> > > > > > > + PP_ASSERT_WITH_CODE(input, "NULL user input for clock
> > > > > > > + and
> > > > > voltage",
> > > > > > > + return -EINVAL);
> > > > > > > +
> > > > > > > + switch (type) {
> > > > > > > + case PP_OD_EDIT_SCLK_VDDC_TABLE:
> > > > > > > + if
> > > > > > > + (!(od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id
> > > > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id
> > > > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id))
> > > > > {
> > > > > > > + pr_info("Sclk voltage overdrive not supported\n");
> > > > > > > + return 0;
> > > > > > > + }
> > > > > > > +
> > > > > > > + for (i = 0; i < size; i += 3) {
> > > > > > > + if (i + 3 > size) {
> > > > > > > + pr_info("invalid clock voltage input\n");
> > > > > > > + return 0;
> > > > > > > + }
> > > > > > > +
> > > > > > > + input_index = input[i];
> > > > > > > + input_clk = input[i + 1];
> > > > > > > + input_vol = input[i + 2];
> > > > > > > + if (input_index > 2 ||
> > > > > > > + input_clk <
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ1 +
> > > > > input_index * 2].min_value ||
> > > > > > > + input_clk >
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ1 +
> > > > > input_index * 2].max_value ||
> > > > > > > + input_vol <
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1 + input_index *
> > > > > 2].min_value ||
> > > > > > > + input_vol >
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1 + input_index *
> > > > > 2].max_value) {
> > > > > > > + pr_info("input argument is not
> > > > > > > + within allowed
> > > range\n");
> > > > > > > + return -EINVAL;
> > > > > > > + }
> > > > > > > +
> > > > > > > + switch (input_index) {
> > > > > > > + case 0:
> > > > > > > + data->od_table.GfxclkFreq1 = input_clk;
> > > > > > > + data->od_table.GfxclkOffsetVolt1 = input_vol;
> > > > > > > + break;
> > > > > > > + case 1:
> > > > > > > + data->od_table.GfxclkFreq2 = input_clk;
> > > > > > > + data->od_table.GfxclkOffsetVolt2 = input_vol;
> > > > > > > + break;
> > > > > > > + case 2:
> > > > > > > + data->od_table.GfxclkFreq3 = input_clk;
> > > > > > > + data->od_table.GfxclkOffsetVolt3 = input_vol;
> > > > > > > + break;
> > > > > > > + }
> > > > > > > + }
> > > > > > > + break;
> > > > > > > +
> > > > > > > + case PP_OD_EDIT_MCLK_VDDC_TABLE:
> > > > > > > + pr_info("Mclk voltage overdrive not supported!\n");
> > > > > > > + break;
> > > > > > > +
> > > > > > > + case PP_OD_RESTORE_DEFAULT_TABLE:
> > > > > > > + ret = vega20_copy_table_from_smc(hwmgr,
> > > > > > > + (uint8_t *)(&od_table),
> > > > > > > + TABLE_OVERDRIVE);
> > > > > > > + PP_ASSERT_WITH_CODE(!ret,
> > > > > > > + "Failed to export over drive table!",
> > > > > > > + return ret);
> > > > > > > +
> > > > > > > + memcpy(&data->od_table, &od_table, sizeof(od_table));
> > > > > > > + break;
> > > > > > > +
> > > > > > > + case PP_OD_COMMIT_DPM_TABLE:
> > > > > > > + memcpy(&od_table, &data->od_table,
> > > > > > > + sizeof(od_table));
> > > > > > > +
> > > > > > > + ret = vega20_copy_table_to_smc(hwmgr,
> > > > > > > + (uint8_t *)(&od_table),
> > > > > > > + TABLE_OVERDRIVE);
> > > > > > > + PP_ASSERT_WITH_CODE(!ret,
> > > > > > > + "Failed to import over drive table!",
> > > > > > > + return ret);
> > > > > > > +
> > > > > > > + break;
> > > > > > > +
> > > > > > > + default:
> > > > > > > + return -EINVAL;
> > > > > > > + }
> > > > > > > +
> > > > > > > + return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > static int vega20_print_clock_levels(struct pp_hwmgr *hwmgr,
> > > > > > > enum pp_clock_type type, char *buf) {
> > > > > > > - int i, now, size = 0;
> > > > > > > + struct vega20_hwmgr *data =
> > > > > > > + (struct vega20_hwmgr *)(hwmgr->backend);
> > > > > > > + struct vega20_od8_single_setting *od8_settings =
> > > > > > > + data->od8_settings.od8_settings_array;
> > > > > > > + OverDriveTable_t *od_table = &data->od_table;
> > > > > > > struct pp_clock_levels_with_latency clocks;
> > > > > > > + int i, now, size = 0;
> > > > > > > int ret = 0;
> > > > > > >
> > > > > > > switch (type) {
> > > > > > > @@ -2551,6 +2659,59 @@ static int
> > > > > > > vega20_print_clock_levels(struct
> > > > > pp_hwmgr *hwmgr,
> > > > > > > case PP_PCIE:
> > > > > > > break;
> > > > > > >
> > > > > > > + case OD_SCLK:
> > > > > > > + if
> > > > > > > + (od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id
> > > > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id
> > > > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id) {
> > > > > > > +
> > > > > > > + size = sprintf(buf, "%s:\n", "OD_SCLK");
> > > > > > > + size += sprintf(buf + size, "0: %10uMhz %10dmV\n",
> > > > > > > + od_table->GfxclkFreq1,
> > > > > > > + od_table->GfxclkOffsetVolt1);
> > > > > > > + size += sprintf(buf + size, "1: %10uMhz %10dmV\n",
> > > > > > > + od_table->GfxclkFreq2,
> > > > > > > + od_table->GfxclkOffsetVolt2);
> > > > > > > + size += sprintf(buf + size, "2: %10uMhz %10dmV\n",
> > > > > > > + od_table->GfxclkFreq3,
> > > > > > > + od_table->GfxclkOffsetVolt3);
> > > > > > > + }
> > > > > > > + break;
> > > > > > > +
> > > > > > > + case OD_MCLK:
> > > > > > > + break;
> > > > > > > +
> > > > > > > + case OD_RANGE:
> > > > > > > + if
> > > > > > > + (od8_settings[OD8_SETTING_GFXCLK_FREQ1].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ2].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ3].feature_id
> > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].feature_id
> > > > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].feature_id
> > > > > &&
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].feature_id) {
> > > > > > > +
> > > > > > > + size = sprintf(buf, "%s:\n", "OD_RANGE");
> > > > > > > + size += sprintf(buf + size,
> > > "SCLK[0]: %7uMhz %10uMhz\n",
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ1].min_value,
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_FREQ1].max_value);
> > > > > > > + size += sprintf(buf + size, "VDDC[0]:
> > > > > > > + %7dmV %11dmV\n",
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].min_value,
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE1].max_value);
> > > > > > > + size += sprintf(buf + size,
> > > "SCLK[1]: %7uMhz %10uMhz\n",
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ2].min_value,
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_FREQ2].max_value);
> > > > > > > + size += sprintf(buf + size, "VDDC[1]:
> > > > > > > + %7dmV %11dmV\n",
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].min_value,
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE2].max_value);
> > > > > > > + size += sprintf(buf + size,
> > > "SCLK[2]: %7uMhz %10uMhz\n",
> > > > > > > +
> > > > > > > + od8_settings[OD8_SETTING_GFXCLK_FREQ3].min_value,
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_FREQ3].max_value);
> > > > > > > + size += sprintf(buf + size, "VDDC[2]:
> > > > > > > + %7dmV %11dmV\n",
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].min_value,
> > > > > > > +
> > > > > od8_settings[OD8_SETTING_GFXCLK_VOLTAGE3].max_value);
> > > > > > > + }
> > > > > > > + break;
> > > > > > > default:
> > > > > > > break;
> > > > > > > }
> > > > > > > @@ -3162,6 +3323,8 @@ static const struct pp_hwmgr_func
> > > > > vega20_hwmgr_funcs = {
> > > > > > > vega20_get_mclk_od,
> > > > > > > .set_mclk_od =
> > > > > > > vega20_set_mclk_od,
> > > > > > > + .odn_edit_dpm_table =
> > > > > > > + vega20_odn_edit_dpm_table,
> > > > > > > /* for sysfs to retrive/set gfxclk/memclk */
> > > > > > > .force_clock_level =
> > > > > > > vega20_force_clock_level, diff --git
> > > > > > > a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
> > > > > > > b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
> > > > > > > index 72e4f2a55641..8bb90e22efb6 100644
> > > > > > > --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
> > > > > > > +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega20_hwmgr.h
> > > > > > > @@ -513,6 +513,8 @@ struct vega20_hwmgr {
> > > > > > > /* ---- Gfxoff ---- */
> > > > > > > bool gfxoff_allowed;
> > > > > > > uint32_t counter_gfxoff;
> > > > > > > +
> > > > > > > + OverDriveTable_t od_table;
> > > > > > > };
> > > > > > >
> > > > > > > #define VEGA20_DPM2_NEAR_TDP_DEC 10
> > > > > > > --
> > > > > > > 2.18.0
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > amd-gfx mailing list
> > > > > > > amd-gfx at lists.freedesktop.org
> > > > > > > https://lists.freedesktop.org/mailman/listinfo/amd-gfx
More information about the amd-gfx
mailing list