MCLK defaults high on second card

[Deucher, Alexander]

Does it also work properly with dc disabled?  I suspect a bug somewhere in the display info that dc generated when no displays are attached.  See smu7_program_display_gap().

Alex

________________________________
From: StDenis, Tom
Sent: Thursday, February 1, 2018 1:43 PM
To: Deucher, Alexander; amd-gfx mailing list
Cc: Zhu, Rex
Subject: Re: MCLK defaults high on second card

On 01/02/18 01:36 PM, Deucher, Alexander wrote:
> Are there any displays attached to the secondary card with the mclks
> stuck high?  If not, does attaching a display help?

Stealing the display from my primary (CZ in this case) does help, and
then putting it back the MCLK remains low.

Tom

>
>
> Alex
>
> ------------------------------------------------------------------------
> *From:* amd-gfx <amd-gfx-bounces at lists.freedesktop.org> on behalf of Tom
> St Denis <tom.stdenis at amd.com>
> *Sent:* Thursday, February 1, 2018 1:14:43 PM
> *To:* amd-gfx mailing list
> *Cc:* Zhu, Rex
> *Subject:* MCLK defaults high on second card
> Hi,
>
> I have a setup with a CZ + Polaris10 and on the Polaris10 the SCLK idles
> low and the MCLK stays in the 2nd state (1750MHz) but on my Workstation
> which has a single 560 in it the card idles at 300MHz (with the stock
> FC27 kernel).
>
> Is there an issue with non-primary cards idling properly?
>
> Doing
>
> echo 0 > /sys/devices/pci0000:00/0000:00:03.1/0000:21:00.0/pp_dpm_mclk
>
> Doesn't result in low clock rates either.
>
> Tom
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/amd-gfx/attachments/20180201/138ecfad/attachment.html>