[PATCH 3/5] drm/amdgpu: enable system interrupt for jrbc

Alex Deucher alexdeucher at gmail.com
Thu Jul 19 18:51:34 UTC 2018


On Wed, Jul 18, 2018 at 4:39 PM,  <boyuan.zhang at amd.com> wrote:
> From: Boyuan Zhang <boyuan.zhang at amd.com>
>
> Enable system interrupt for jrbc during engine starting time.
>
> Signed-off-by: Boyuan Zhang <boyuan.zhang at amd.com>
> ---
>  drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c | 8 +++++++-
>  1 file changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
> index 4fccb21..22c1588 100644
> --- a/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
> +++ b/drivers/gpu/drm/amd/amdgpu/vcn_v1_0.c
> @@ -595,6 +595,7 @@ static int vcn_v1_0_start(struct amdgpu_device *adev)
>         struct amdgpu_ring *ring = &adev->vcn.ring_dec;
>         uint32_t rb_bufsz, tmp;
>         uint32_t lmi_swap_cntl;
> +       uint32_t reg_temp;
>         int i, j, r;
>
>         /* disable byte swapping */
> @@ -700,6 +701,11 @@ static int vcn_v1_0_start(struct amdgpu_device *adev)
>                 (UVD_MASTINT_EN__VCPU_EN_MASK|UVD_MASTINT_EN__SYS_EN_MASK),
>                 ~(UVD_MASTINT_EN__VCPU_EN_MASK|UVD_MASTINT_EN__SYS_EN_MASK));
>
> +       /* enable system interrupt for JRBC*/
> +       reg_temp = RREG32(SOC15_REG_OFFSET(UVD, 0, mmUVD_SYS_INT_EN));
> +       reg_temp |= UVD_SYS_INT_EN__UVD_JRBC_EN_MASK;
> +       WREG32(SOC15_REG_OFFSET(UVD, 0, mmUVD_SYS_INT_EN), reg_temp);
> +

Shouldn't we move the setting of these interrupts into
vcn_v1_0_set_interrupt_state()? Same for the mastint.  that way they
will get enabled/disabled as part of the fence driver sequence I
think.  Or do they need to happen in a specific sequence?

Alex

>         /* clear the bit 4 of VCN_STATUS */
>         WREG32_P(SOC15_REG_OFFSET(UVD, 0, mmUVD_STATUS), 0,
>                         ~(2 << UVD_STATUS__VCPU_REPORT__SHIFT));
> @@ -1754,7 +1760,7 @@ static const struct amdgpu_irq_src_funcs vcn_v1_0_irq_funcs = {
>
>  static void vcn_v1_0_set_irq_funcs(struct amdgpu_device *adev)
>  {
> -       adev->vcn.irq.num_types = adev->vcn.num_enc_rings + 1;
> +       adev->vcn.irq.num_types = adev->vcn.num_enc_rings + 2;
>         adev->vcn.irq.funcs = &vcn_v1_0_irq_funcs;
>  }
>
> --
> 2.7.4
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx


More information about the amd-gfx mailing list