[PATCH 18/51] drm/amd/display: clean up set_bandwidth usage

Harry Wentland harry.wentland at amd.com
Tue Jun 19 21:10:25 UTC 2018


From: Dmytro Laktyushkin <Dmytro.Laktyushkin at amd.com>

This removes redundant set_bandwidth calls as well
as fixes a bug in post_set_address_update where dcn1
would never get to lower clocks.

Change-Id: I6ad9fe8179b7281b5bd3b58665a1efdf1ec5b8a0
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin at amd.com>
Reviewed-by: Nikola Cornij <Nikola.Cornij at amd.com>
Acked-by: Harry Wentland <harry.wentland at amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc.c              |  5 -----
 .../drm/amd/display/dc/dce110/dce110_hw_sequencer.c   |  5 -----
 .../gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c | 11 +++--------
 3 files changed, 3 insertions(+), 18 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c
index caa8c908b63f..e855424ee575 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc.c
@@ -942,12 +942,7 @@ bool dc_post_update_surfaces_to_stream(struct dc *dc)
 
 	dc->optimized_required = false;
 
-	/* 3rd param should be true, temp w/a for RV*/
-#if defined(CONFIG_DRM_AMD_DC_DCN1_0)
-	dc->hwss.set_bandwidth(dc, context, dc->ctx->dce_version < DCN_VERSION_1_0);
-#else
 	dc->hwss.set_bandwidth(dc, context, true);
-#endif
 	return true;
 }
 
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index f723a29e8065..9ea576cbbefa 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2018,8 +2018,6 @@ enum dc_status dce110_apply_ctx_to_hw(
 	if (dc->fbc_compressor)
 		dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);
 
-	dc->hwss.set_bandwidth(dc, context, false);
-
 	dce110_setup_audio_dto(dc, context);
 
 	for (i = 0; i < dc->res_pool->pipe_count; i++) {
@@ -2048,9 +2046,6 @@ enum dc_status dce110_apply_ctx_to_hw(
 			return status;
 	}
 
-	/* to save power */
-	dc->hwss.set_bandwidth(dc, context, true);
-
 	dcb->funcs->set_scratch_critical_state(dcb, false);
 
 	if (dc->fbc_compressor)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 5d47b282aef2..ef3969fd372c 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -2283,8 +2283,7 @@ static void dcn10_apply_ctx_for_surface(
 			hwss1_plane_atomic_disconnect(dc, old_pipe_ctx);
 			removed_pipe[i] = true;
 
-			DC_LOG_DC(
-					"Reset mpcc for pipe %d\n",
+			DC_LOG_DC("Reset mpcc for pipe %d\n",
 					old_pipe_ctx->pipe_idx);
 		}
 	}
@@ -2380,9 +2379,8 @@ static void dcn10_set_bandwidth(
 		struct dc_state *context,
 		bool decrease_allowed)
 {
-	if (dc->debug.sanity_checks) {
+	if (dc->debug.sanity_checks)
 		dcn10_verify_allow_pstate_change_high(dc);
-	}
 
 	if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
 		return;
@@ -2397,11 +2395,8 @@ static void dcn10_set_bandwidth(
 
 	dcn10_pplib_apply_display_requirements(dc, context);
 
-	if (dc->debug.sanity_checks) {
+	if (dc->debug.sanity_checks)
 		dcn10_verify_allow_pstate_change_high(dc);
-	}
-
-	/* need to fix this function.  not doing the right thing here */
 }
 
 static void set_drr(struct pipe_ctx **pipe_ctx,
-- 
2.17.1



More information about the amd-gfx mailing list