[PATCH v2 4/9] powerpc/powernv/npu: use helper pci_dev_id

Alexey Kardashevskiy aik at ozlabs.ru
Fri Apr 26 03:44:35 UTC 2019



On 25/04/2019 05:14, Heiner Kallweit wrote:
> Use new helper pci_dev_id() to simplify the code.
> 
> Signed-off-by: Heiner Kallweit <hkallweit1 at gmail.com>



Reviewed-by: Alexey Kardashevskiy <aik at ozlabs.ru>


> ---
>  arch/powerpc/platforms/powernv/npu-dma.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/powerpc/platforms/powernv/npu-dma.c b/arch/powerpc/platforms/powernv/npu-dma.c
> index dc23d9d2a..495550432 100644
> --- a/arch/powerpc/platforms/powernv/npu-dma.c
> +++ b/arch/powerpc/platforms/powernv/npu-dma.c
> @@ -1213,9 +1213,8 @@ int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
>  	 * Currently we only support radix and non-zero LPCR only makes sense
>  	 * for hash tables so skiboot expects the LPCR parameter to be a zero.
>  	 */
> -	ret = opal_npu_map_lpar(nphb->opal_id,
> -			PCI_DEVID(gpdev->bus->number, gpdev->devfn), lparid,
> -			0 /* LPCR bits */);
> +	ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), lparid,
> +				0 /* LPCR bits */);
>  	if (ret) {
>  		dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
>  		return ret;
> @@ -1224,7 +1223,7 @@ int pnv_npu2_map_lpar_dev(struct pci_dev *gpdev, unsigned int lparid,
>  	dev_dbg(&gpdev->dev, "init context opalid=%llu msr=%lx\n",
>  			nphb->opal_id, msr);
>  	ret = opal_npu_init_context(nphb->opal_id, 0/*__unused*/, msr,
> -			PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> +				    pci_dev_id(gpdev));
>  	if (ret < 0)
>  		dev_err(&gpdev->dev, "Failed to init context: %d\n", ret);
>  	else
> @@ -1258,7 +1257,7 @@ int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev)
>  	dev_dbg(&gpdev->dev, "destroy context opalid=%llu\n",
>  			nphb->opal_id);
>  	ret = opal_npu_destroy_context(nphb->opal_id, 0/*__unused*/,
> -			PCI_DEVID(gpdev->bus->number, gpdev->devfn));
> +				       pci_dev_id(gpdev));
>  	if (ret < 0) {
>  		dev_err(&gpdev->dev, "Failed to destroy context: %d\n", ret);
>  		return ret;
> @@ -1266,9 +1265,8 @@ int pnv_npu2_unmap_lpar_dev(struct pci_dev *gpdev)
>  
>  	/* Set LPID to 0 anyway, just to be safe */
>  	dev_dbg(&gpdev->dev, "Map LPAR opalid=%llu lparid=0\n", nphb->opal_id);
> -	ret = opal_npu_map_lpar(nphb->opal_id,
> -			PCI_DEVID(gpdev->bus->number, gpdev->devfn), 0 /*LPID*/,
> -			0 /* LPCR bits */);
> +	ret = opal_npu_map_lpar(nphb->opal_id, pci_dev_id(gpdev), 0 /*LPID*/,
> +				0 /* LPCR bits */);
>  	if (ret)
>  		dev_err(&gpdev->dev, "Error %d mapping device to LPAR\n", ret);
>  
> 

-- 
Alexey


More information about the amd-gfx mailing list