[PATCH 18/27] drm/amdgpu: enable Renoir VCN firmware loading

[Alex Deucher]

From: Leo Liu <leo.liu at amd.com>

By adding new Renoir VCN firmware

Signed-off-by: Leo Liu <leo.liu at amd.com>
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
Signed-off-by: Alex Deucher <alexander.deucher at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
index b74f0f679aca..8566a264961f 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vcn.c
@@ -46,6 +46,7 @@
 #define FIRMWARE_PICASSO	"amdgpu/picasso_vcn.bin"
 #define FIRMWARE_RAVEN2		"amdgpu/raven2_vcn.bin"
 #define FIRMWARE_ARCTURUS 	"amdgpu/arcturus_vcn.bin"
+#define FIRMWARE_RENOIR 	"amdgpu/renoir_vcn.bin"
 #define FIRMWARE_NAVI10 	"amdgpu/navi10_vcn.bin"
 #define FIRMWARE_NAVI14 	"amdgpu/navi14_vcn.bin"
 #define FIRMWARE_NAVI12 	"amdgpu/navi12_vcn.bin"
@@ -54,6 +55,7 @@ MODULE_FIRMWARE(FIRMWARE_RAVEN);
 MODULE_FIRMWARE(FIRMWARE_PICASSO);
 MODULE_FIRMWARE(FIRMWARE_RAVEN2);
 MODULE_FIRMWARE(FIRMWARE_ARCTURUS);
+MODULE_FIRMWARE(FIRMWARE_RENOIR);
 MODULE_FIRMWARE(FIRMWARE_NAVI10);
 MODULE_FIRMWARE(FIRMWARE_NAVI14);
 MODULE_FIRMWARE(FIRMWARE_NAVI12);
@@ -82,6 +84,12 @@ int amdgpu_vcn_sw_init(struct amdgpu_device *adev)
 	case CHIP_ARCTURUS:
 		fw_name = FIRMWARE_ARCTURUS;
 		break;
+	case CHIP_RENOIR:
+		fw_name = FIRMWARE_RENOIR;
+		if ((adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) &&
+		    (adev->pg_flags & AMD_PG_SUPPORT_VCN_DPG))
+			adev->vcn.indirect_sram = true;
+		break;
 	case CHIP_NAVI10:
 		fw_name = FIRMWARE_NAVI10;
 		if ((adev->firmware.load_type == AMDGPU_FW_LOAD_PSP) &&
-- 
2.20.1