[PATCH v4 4/4] drm/amdgpu: Vega20 SMU I2C HW engine controller.
Alex Deucher
alexdeucher at gmail.com
Thu Aug 22 15:59:29 UTC 2019
On Thu, Aug 22, 2019 at 11:35 AM Grodzovsky, Andrey
<Andrey.Grodzovsky at amd.com> wrote:
>
>
> On 8/21/19 10:32 PM, Alex Deucher wrote:
> > On Wed, Aug 21, 2019 at 4:02 PM Andrey Grodzovsky
> > <andrey.grodzovsky at amd.com> wrote:
> >> Implement HW I2C enigne controller to be used by the RAS EEPROM
> >> table manager. This is based on code from ATITOOLs.
> >>
> >> v2:
> >> Rename the file and all function prefixes to smu_v11_0_i2c
> >>
> >> By Luben's observation always fill the TX fifo to full so
> >> we don't have garbadge interpreted by the slave as valid data.
> >>
> >> v3:
> >> Remove preemption disable as the HW I2C controller will not
> >> stop the clock on empty TX fifo and so it's not critical to
> >> keep not empty queue.
> >> Switch to fast mode 400 khz SCL clock for faster read and write.
> >>
> >> Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky at amd.com>
> >> ---
> >> drivers/gpu/drm/amd/amdgpu/Makefile | 5 +-
> >> drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c | 5 +-
> >> drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c | 710 +++++++++++++++++++++++++
> >> drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.h | 34 ++
> >> 4 files changed, 751 insertions(+), 3 deletions(-)
> >> create mode 100644 drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c
> >> create mode 100644 drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.h
> >>
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/Makefile b/drivers/gpu/drm/amd/amdgpu/Makefile
> >> index f016cf1..14733ff 100644
> >> --- a/drivers/gpu/drm/amd/amdgpu/Makefile
> >> +++ b/drivers/gpu/drm/amd/amdgpu/Makefile
> >> @@ -38,6 +38,9 @@ ccflags-y := -I$(FULL_AMD_PATH)/include/asic_reg \
> >> -I$(FULL_AMD_DISPLAY_PATH)/amdgpu_dm \
> >> -I$(FULL_AMD_PATH)/amdkfd
> >>
> >> +
> >> +
> >> +
> > Drop this random whitespace change.
> >
> >> amdgpu-y := amdgpu_drv.o
> >>
> >> # add KMS driver
> >> @@ -54,7 +57,7 @@ amdgpu-y += amdgpu_device.o amdgpu_kms.o \
> >> amdgpu_gtt_mgr.o amdgpu_vram_mgr.o amdgpu_virt.o amdgpu_atomfirmware.o \
> >> amdgpu_vf_error.o amdgpu_sched.o amdgpu_debugfs.o amdgpu_ids.o \
> >> amdgpu_gmc.o amdgpu_xgmi.o amdgpu_csa.o amdgpu_ras.o amdgpu_vm_cpu.o \
> >> - amdgpu_vm_sdma.o amdgpu_pmu.o amdgpu_discovery.o amdgpu_ras_eeprom.o
> >> + amdgpu_vm_sdma.o amdgpu_pmu.o amdgpu_discovery.o amdgpu_ras_eeprom.o smu_v11_0_i2c.o
> >>
> >> amdgpu-$(CONFIG_PERF_EVENTS) += amdgpu_pmu.o
> >>
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
> >> index bf07515..e6b2e17 100644
> >> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
> >> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
> >> @@ -25,6 +25,7 @@
> >> #include "amdgpu.h"
> >> #include "amdgpu_ras.h"
> >> #include <linux/bits.h>
> >> +#include "smu_v11_0_i2c.h"
> >>
> >> #define EEPROM_I2C_TARGET_ADDR 0xA0
> >>
> >> @@ -111,7 +112,7 @@ int amdgpu_ras_eeprom_init(struct amdgpu_ras_eeprom_control *control)
> >>
> >> switch (adev->asic_type) {
> >> case CHIP_VEGA20:
> >> - /*TODO Add MI-60 */
> >> + ret = smu_v11_0_i2c_eeprom_control_init(&control->eeprom_accessor);
> >> break;
> >>
> >> default:
> >> @@ -163,7 +164,7 @@ void amdgpu_ras_eeprom_fini(struct amdgpu_ras_eeprom_control *control)
> >>
> >> switch (adev->asic_type) {
> >> case CHIP_VEGA20:
> >> - /*TODO Add MI-60 */
> >> + smu_v11_0_i2c_eeprom_control_fini(&control->eeprom_accessor);
> >> break;
> >>
> >> default:
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c b/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c
> >> new file mode 100644
> >> index 0000000..24405fa
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.c
> >> @@ -0,0 +1,710 @@
> >> +/*
> >> + * Copyright 2019 Advanced Micro Devices, Inc.
> >> + *
> >> + * Permission is hereby granted, free of charge, to any person obtaining a
> >> + * copy of this software and associated documentation files (the "Software"),
> >> + * to deal in the Software without restriction, including without limitation
> >> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> >> + * and/or sell copies of the Software, and to permit persons to whom the
> >> + * Software is furnished to do so, subject to the following conditions:
> >> + *
> >> + * The above copyright notice and this permission notice shall be included in
> >> + * all copies or substantial portions of the Software.
> >> + *
> >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> >> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> >> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >> + * OTHER DEALINGS IN THE SOFTWARE.
> >> + *
> >> + */
> >> +
> >> +#include "smuio/smuio_11_0_0_offset.h"
> >> +#include "smuio/smuio_11_0_0_sh_mask.h"
> >> +
> >> +#include "smu_v11_0_i2c.h"
> >> +#include "amdgpu.h"
> >> +#include "soc15_common.h"
> >> +#include <drm/drm_fixed.h>
> >> +#include "amdgpu_amdkfd.h"
> >> +#include <linux/i2c.h>
> >> +#include "amdgpu_ras.h"
> >> +
> >> +/* error codes */
> >> +#define I2C_OK 0
> >> +#define I2C_NAK_7B_ADDR_NOACK 1
> >> +#define I2C_NAK_TXDATA_NOACK 2
> >> +#define I2C_TIMEOUT 4
> >> +#define I2C_SW_TIMEOUT 8
> >> +#define I2C_ABORT 0x10
> >> +
> >> +/* I2C transaction flags */
> >> +#define I2C_NO_STOP 1
> >> +#define I2C_RESTART 2
> >> +
> >> +#define to_amdgpu_device(x) (container_of(x, struct amdgpu_ras, eeprom_control.eeprom_accessor))->adev
> >> +#define to_eeprom_control(x) container_of(x, struct amdgpu_ras_eeprom_control, eeprom_accessor)
> >> +
> >> +static void smu_v11_0_i2c_dis_clock_gating(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t reg;
> >> +
> >> + reg = RREG32_SOC15(SMUIO, 0, mmSMUIO_PWRMGT);
> >> + reg = REG_SET_FIELD(reg, SMUIO_PWRMGT, i2c_clk_gate_en, 0);
> >> + WREG32_SOC15(SMUIO, 0, mmSMUIO_PWRMGT, reg);
> >> +}
> > Do we need to worry about re-enabling clock gating when we are done?
>
>
> In smu_11_smuio_mas doc this step is missing for I2C0 (sec. 18.4.1.1)
> and hence probably also was missing from the original code this was
> ported so I am not sure. The side effect of this staying disabled is
> less power saving I think.
Can we check the state of SMUIO_PWRMGT.i2c_clk_gate_en at init time,
and then, if it's enabled, we can disable it in lock_bus and enable it
in unlock_bus.
Alex
>
> Andrey
>
>
> >
> >
> >> +
> >> +
> >> +static void smu_v11_0_i2c_enable(struct i2c_adapter *control, bool enable)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> +
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE, enable ? 1 : 0);
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_clear_status(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + /* do */
> >> + {
> >> + RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_CLR_INTR);
> >> +
> >> + } /* while (reg_CKSVII2C_ic_clr_intr == 0) */
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_configure(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t reg = 0;
> >> +
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_SLAVE_DISABLE, 1);
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_RESTART_EN, 1);
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_10BITADDR_MASTER, 0);
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_10BITADDR_SLAVE, 0);
> >> + /* Standard mode */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_MAX_SPEED_MODE, 2);
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_CON, IC_MASTER_MODE, 1);
> >> +
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_CON, reg);
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_set_clock(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> +
> >> + /*
> >> + * Standard mode speed, These values are taken from SMUIO MAS,
> >> + * but are different from what is given is
> >> + * Synopsys spec. The values here are based on assumption
> >> + * that refclock is 100MHz
> >> + *
> >> + * Configuration for standard mode; Speed = 100kbps
> >> + * Scale linearly, for now only support standard speed clock
> >> + * This will work only with 100M ref clock
> >> + *
> >> + * TBD:Change the calculation to take into account ref clock values also.
> >> + */
> >> +
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_FS_SPKLEN, 2);
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_SS_SCL_HCNT, 120);
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_SS_SCL_LCNT, 130);
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_SDA_HOLD, 20);
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_set_address(struct i2c_adapter *control, uint8_t address)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> +
> >> + /* Convert fromr 8-bit to 7-bit address */
> >> + address >>= 1;
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TAR, (address & 0xFF));
> >> +}
> >> +
> >> +static uint32_t smu_v11_0_i2c_poll_tx_status(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t ret = I2C_OK;
> >> + uint32_t reg, reg_c_tx_abrt_source;
> >> +
> >> + /*Check if transmission is completed */
> >> + unsigned long timeout_counter = jiffies + msecs_to_jiffies(20);
> >> +
> >> + do {
> >> + reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS);
> >> +
> >> + if (time_after(jiffies, timeout_counter)) {
> >> + ret |= I2C_SW_TIMEOUT;
> >> + break;
> >> + }
> >> + } while (REG_GET_FIELD(reg, CKSVII2C_IC_STATUS, TFE) == 0);
> >> +
> >> + if (ret != I2C_OK)
> >> + return ret;
> >> +
> >> + /* This only checks if NAK is received and transaction got aborted */
> >> + reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_INTR_STAT);
> >> +
> >> + if (REG_GET_FIELD(reg, CKSVII2C_IC_INTR_STAT, R_TX_ABRT) == 1) {
> >> + reg_c_tx_abrt_source = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TX_ABRT_SOURCE);
> >> + DRM_INFO("TX was terminated, IC_TX_ABRT_SOURCE val is:%x", reg_c_tx_abrt_source);
> >> +
> >> + /* Check for stop due to NACK */
> >> + if (REG_GET_FIELD(reg_c_tx_abrt_source,
> >> + CKSVII2C_IC_TX_ABRT_SOURCE,
> >> + ABRT_TXDATA_NOACK) == 1) {
> >> +
> >> + ret |= I2C_NAK_TXDATA_NOACK;
> >> +
> >> + } else if (REG_GET_FIELD(reg_c_tx_abrt_source,
> >> + CKSVII2C_IC_TX_ABRT_SOURCE,
> >> + ABRT_7B_ADDR_NOACK) == 1) {
> >> +
> >> + ret |= I2C_NAK_7B_ADDR_NOACK;
> >> + } else {
> >> + ret |= I2C_ABORT;
> >> + }
> >> +
> >> + smu_v11_0_i2c_clear_status(control);
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static uint32_t smu_v11_0_i2c_poll_rx_status(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t ret = I2C_OK;
> >> + uint32_t reg_ic_status, reg_c_tx_abrt_source;
> >> +
> >> + reg_c_tx_abrt_source = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_TX_ABRT_SOURCE);
> >> +
> >> + /* If slave is not present */
> >> + if (REG_GET_FIELD(reg_c_tx_abrt_source,
> >> + CKSVII2C_IC_TX_ABRT_SOURCE,
> >> + ABRT_7B_ADDR_NOACK) == 1) {
> >> + ret |= I2C_NAK_7B_ADDR_NOACK;
> >> +
> >> + smu_v11_0_i2c_clear_status(control);
> >> + } else { /* wait till some data is there in RXFIFO */
> >> + /* Poll for some byte in RXFIFO */
> >> + unsigned long timeout_counter = jiffies + msecs_to_jiffies(20);
> >> +
> >> + do {
> >> + reg_ic_status = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS);
> >> +
> >> + if (time_after(jiffies, timeout_counter)) {
> >> + ret |= I2C_SW_TIMEOUT;
> >> + break;
> >> + }
> >> + } while (REG_GET_FIELD(reg_ic_status, CKSVII2C_IC_STATUS, RFNE) == 0);
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +
> >> +
> >> +
> >> +/**
> >> + * smu_v11_0_i2c_transmit - Send a block of data over the I2C bus to a slave device.
> >> + *
> >> + * @address: The I2C address of the slave device.
> >> + * @data: The data to transmit over the bus.
> >> + * @numbytes: The amount of data to transmit.
> >> + * @i2c_flag: Flags for transmission
> >> + *
> >> + * Returns 0 on success or error.
> >> + */
> >> +static uint32_t smu_v11_0_i2c_transmit(struct i2c_adapter *control,
> >> + uint8_t address, uint8_t *data,
> >> + uint32_t numbytes, uint32_t i2c_flag)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t bytes_sent, reg, ret = 0;
> >> + unsigned long timeout_counter;
> >> +
> >> + bytes_sent = 0;
> >> +
> >> + DRM_DEBUG_DRIVER("I2C_Transmit(), address = %x, bytes = %d , data: ",
> >> + (uint16_t)address, numbytes);
> >> +
> >> + if (drm_debug & DRM_UT_DRIVER) {
> >> + print_hex_dump(KERN_INFO, "data: ", DUMP_PREFIX_NONE,
> >> + 16, 1, data, numbytes, false);
> >> + }
> >> +
> >> + /* Set the I2C slave address */
> >> + smu_v11_0_i2c_set_address(control, address);
> >> + /* Enable I2C */
> >> + smu_v11_0_i2c_enable(control, true);
> >> +
> >> + /* Clear status bits */
> >> + smu_v11_0_i2c_clear_status(control);
> >> +
> >> +
> >> + timeout_counter = jiffies + msecs_to_jiffies(20);
> >> +
> >> + while (numbytes > 0) {
> >> + reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS);
> >> + if (REG_GET_FIELD(reg, CKSVII2C_IC_STATUS, TFNF)) {
> >> + do {
> >> + reg = 0;
> >> + /*
> >> + * Prepare transaction, no need to set RESTART. I2C engine will send
> >> + * START as soon as it sees data in TXFIFO
> >> + */
> >> + if (bytes_sent == 0)
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, RESTART,
> >> + (i2c_flag & I2C_RESTART) ? 1 : 0);
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, DAT, data[bytes_sent]);
> >> +
> >> + /* determine if we need to send STOP bit or not */
> >> + if (numbytes == 1)
> >> + /* Final transaction, so send stop unless I2C_NO_STOP */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, STOP,
> >> + (i2c_flag & I2C_NO_STOP) ? 0 : 1);
> >> + /* Write */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, CMD, 0);
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_DATA_CMD, reg);
> >> +
> >> + /* Record that the bytes were transmitted */
> >> + bytes_sent++;
> >> + numbytes--;
> >> +
> >> + reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_STATUS);
> >> +
> >> + } while (numbytes && REG_GET_FIELD(reg, CKSVII2C_IC_STATUS, TFNF));
> >> + }
> >> +
> >> +
> >> + if (time_after(jiffies, timeout_counter)) {
> >> + ret |= I2C_SW_TIMEOUT;
> >> + goto err;
> >> + }
> >> + }
> >> +
> >> + ret = smu_v11_0_i2c_poll_tx_status(control);
> >> +
> >> +err:
> >> + /* Any error, no point in proceeding */
> >> + if (ret != I2C_OK) {
> >> + if (ret & I2C_SW_TIMEOUT)
> >> + DRM_ERROR("TIMEOUT ERROR !!!");
> >> +
> >> + if (ret & I2C_NAK_7B_ADDR_NOACK)
> >> + DRM_ERROR("Received I2C_NAK_7B_ADDR_NOACK !!!");
> >> +
> >> +
> >> + if (ret & I2C_NAK_TXDATA_NOACK)
> >> + DRM_ERROR("Received I2C_NAK_TXDATA_NOACK !!!");
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +
> >> +/**
> >> + * smu_v11_0_i2c_receive - Receive a block of data over the I2C bus from a slave device.
> >> + *
> >> + * @address: The I2C address of the slave device.
> >> + * @numbytes: The amount of data to transmit.
> >> + * @i2c_flag: Flags for transmission
> >> + *
> >> + * Returns 0 on success or error.
> >> + */
> >> +static uint32_t smu_v11_0_i2c_receive(struct i2c_adapter *control,
> >> + uint8_t address, uint8_t *data,
> >> + uint32_t numbytes, uint8_t i2c_flag)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t bytes_received, ret = I2C_OK;
> >> +
> >> + bytes_received = 0;
> >> +
> >> + /* Set the I2C slave address */
> >> + smu_v11_0_i2c_set_address(control, address);
> >> +
> >> + /* Enable I2C */
> >> + smu_v11_0_i2c_enable(control, true);
> >> +
> >> + while (numbytes > 0) {
> >> + uint32_t reg = 0;
> >> +
> >> + smu_v11_0_i2c_clear_status(control);
> >> +
> >> +
> >> + /* Prepare transaction */
> >> +
> >> + /* Each time we disable I2C, so this is not a restart */
> >> + if (bytes_received == 0)
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, RESTART,
> >> + (i2c_flag & I2C_RESTART) ? 1 : 0);
> >> +
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, DAT, 0);
> >> + /* Read */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, CMD, 1);
> >> +
> >> + /* Transmitting last byte */
> >> + if (numbytes == 1)
> >> + /* Final transaction, so send stop if requested */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_DATA_CMD, STOP,
> >> + (i2c_flag & I2C_NO_STOP) ? 0 : 1);
> >> +
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_DATA_CMD, reg);
> >> +
> >> + ret = smu_v11_0_i2c_poll_rx_status(control);
> >> +
> >> + /* Any error, no point in proceeding */
> >> + if (ret != I2C_OK) {
> >> + if (ret & I2C_SW_TIMEOUT)
> >> + DRM_ERROR("TIMEOUT ERROR !!!");
> >> +
> >> + if (ret & I2C_NAK_7B_ADDR_NOACK)
> >> + DRM_ERROR("Received I2C_NAK_7B_ADDR_NOACK !!!");
> >> +
> >> + if (ret & I2C_NAK_TXDATA_NOACK)
> >> + DRM_ERROR("Received I2C_NAK_TXDATA_NOACK !!!");
> >> +
> >> + break;
> >> + }
> >> +
> >> + reg = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_DATA_CMD);
> >> + data[bytes_received] = REG_GET_FIELD(reg, CKSVII2C_IC_DATA_CMD, DAT);
> >> +
> >> + /* Record that the bytes were received */
> >> + bytes_received++;
> >> + numbytes--;
> >> + }
> >> +
> >> + DRM_DEBUG_DRIVER("I2C_Receive(), address = %x, bytes = %d, data :",
> >> + (uint16_t)address, bytes_received);
> >> +
> >> + if (drm_debug & DRM_UT_DRIVER) {
> >> + print_hex_dump(KERN_INFO, "data: ", DUMP_PREFIX_NONE,
> >> + 16, 1, data, bytes_received, false);
> >> + }
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_abort(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t reg = 0;
> >> +
> >> + /* Enable I2C engine; */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_ENABLE, ENABLE, 1);
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE, reg);
> >> +
> >> + /* Abort previous transaction */
> >> + reg = REG_SET_FIELD(reg, CKSVII2C_IC_ENABLE, ABORT, 1);
> >> + WREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE, reg);
> >> +
> >> + DRM_DEBUG_DRIVER("I2C_Abort() Done.");
> >> +}
> >> +
> >> +
> >> +static bool smu_v11_0_i2c_activity_done(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> +
> >> + const uint32_t IDLE_TIMEOUT = 1024;
> >> + uint32_t timeoutCount = 0;
> > kernel coding style prefers non CamelCase. E.g., timeout_count.
> >
> >> + uint32_t reg_ic_enable, reg_ic_enable_status, reg_ic_clr_activity;
> >> +
> >> + reg_ic_enable_status = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE_STATUS);
> >> + reg_ic_enable = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE);
> >> +
> >> +
> >> + if ((REG_GET_FIELD(reg_ic_enable, CKSVII2C_IC_ENABLE, ENABLE) == 0) &&
> >> + (REG_GET_FIELD(reg_ic_enable_status, CKSVII2C_IC_ENABLE_STATUS, IC_EN) == 1)) {
> >> + /*
> >> + * Nobody is using I2C engine, but engine remains active because
> >> + * someone missed to send STOP
> >> + */
> >> + smu_v11_0_i2c_abort(control);
> >> + } else if (REG_GET_FIELD(reg_ic_enable, CKSVII2C_IC_ENABLE, ENABLE) == 0) {
> >> + /* Nobody is using I2C engine */
> >> + return true;
> >> + }
> >> +
> >> + /* Keep reading activity bit until it's cleared */
> >> + do {
> >> + reg_ic_clr_activity = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_CLR_ACTIVITY);
> >> +
> >> + if (REG_GET_FIELD(reg_ic_clr_activity,
> >> + CKSVII2C_IC_CLR_ACTIVITY, CLR_ACTIVITY) == 0)
> >> + return true;
> >> +
> >> + ++timeoutCount;
> >> +
> >> + } while (timeoutCount < IDLE_TIMEOUT);
> >> +
> >> + return false;
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_init(struct i2c_adapter *control)
> >> +{
> >> + /* Disable clock gating */
> >> + smu_v11_0_i2c_dis_clock_gating(control);
> >> +
> >> + if (!smu_v11_0_i2c_activity_done(control))
> >> + DRM_WARN("I2C busy !");
> >> +
> >> + /* Disable I2C */
> >> + smu_v11_0_i2c_enable(control, false);
> >> +
> >> + /* Configure I2C to operate as master and in standard mode */
> >> + smu_v11_0_i2c_configure(control);
> >> +
> >> + /* Initialize the clock to 50 kHz default */
> >> + smu_v11_0_i2c_set_clock(control);
> >> +
> >> +}
> >> +
> >> +static void smu_v11_0_i2c_fini(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + uint32_t reg_ic_enable_status, reg_ic_enable;
> >> +
> >> + smu_v11_0_i2c_enable(control, false);
> >> +
> >> + /* Double check if disabled, else force abort */
> >> + reg_ic_enable_status = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE_STATUS);
> >> + reg_ic_enable = RREG32_SOC15(SMUIO, 0, mmCKSVII2C_IC_ENABLE);
> >> +
> >> + if ((REG_GET_FIELD(reg_ic_enable, CKSVII2C_IC_ENABLE, ENABLE) == 0) &&
> >> + (REG_GET_FIELD(reg_ic_enable_status,
> >> + CKSVII2C_IC_ENABLE_STATUS, IC_EN) == 1)) {
> >> + /*
> >> + * Nobody is using I2C engine, but engine remains active because
> >> + * someone missed to send STOP
> >> + */
> >> + smu_v11_0_i2c_abort(control);
> >> + }
> >> +
> >> +}
> >> +
> >> +static bool smu_v11_0_i2c_bus_lock(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> +
> >> + /* Send PPSMC_MSG_RequestI2CBus */
> >> + if (!adev->powerplay.pp_funcs->smu_i2c_bus_access)
> >> + goto fail;
> >> +
> >> +
> >> + if (!adev->powerplay.pp_funcs->smu_i2c_bus_access(adev->powerplay.pp_handle, true))
> >> + return true;
> >> +
> >> +fail:
> >> + return false;
> >> +}
> >> +
> >> +static bool smu_v11_0_i2c_bus_unlock(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> +
> >> + /* Send PPSMC_MSG_RequestI2CBus */
> >> + if (!adev->powerplay.pp_funcs->smu_i2c_bus_access)
> >> + goto fail;
> >> +
> >> + /* Send PPSMC_MSG_ReleaseI2CBus */
> >> + if (!adev->powerplay.pp_funcs->smu_i2c_bus_access(adev->powerplay.pp_handle,
> >> + false))
> >> + return true;
> >> +
> >> +fail:
> >> + return false;
> >> +}
> >> +
> >> +/***************************** EEPROM I2C GLUE ****************************/
> >> +
> >> +static uint32_t smu_v11_0_i2c_eeprom_read_data(struct i2c_adapter *control,
> >> + uint8_t address,
> >> + uint8_t *data,
> >> + uint32_t numbytes)
> >> +{
> >> + uint32_t ret = 0;
> >> +
> >> + /* First 2 bytes are dummy write to set EEPROM address */
> >> + ret = smu_v11_0_i2c_transmit(control, address, data, 2, I2C_NO_STOP);
> >> + if (ret != I2C_OK)
> >> + goto fail;
> >> +
> >> + /* Now read data starting with that address */
> >> + ret = smu_v11_0_i2c_receive(control, address, data + 2, numbytes - 2,
> >> + I2C_RESTART);
> >> +
> >> +fail:
> >> + if (ret != I2C_OK)
> >> + DRM_ERROR("ReadData() - I2C error occurred :%x", ret);
> >> +
> >> + return ret;
> >> +}
> >> +
> >> +static uint32_t smu_v11_0_i2c_eeprom_write_data(struct i2c_adapter *control,
> >> + uint8_t address,
> >> + uint8_t *data,
> >> + uint32_t numbytes)
> >> +{
> >> + uint32_t ret;
> >> +
> >> + ret = smu_v11_0_i2c_transmit(control, address, data, numbytes, 0);
> >> +
> >> + if (ret != I2C_OK)
> >> + DRM_ERROR("WriteI2CData() - I2C error occurred :%x", ret);
> >> + else
> >> + /*
> >> + * According to EEPROM spec there is a MAX of 10 ms required for
> >> + * EEPROM to flush internal RX buffer after STOP was issued at the
> >> + * end of write transaction. During this time the EEPROM will not be
> >> + * responsive to any more commands - so wait a bit more.
> >> + *
> >> + * TODO Improve to wait for first ACK for slave address after
> >> + * internal write cycle done.
> >> + */
> >> + msleep(10);
> >> +
> >> + return ret;
> >> +
> >> +}
> >> +
> >> +static void lock_bus(struct i2c_adapter *i2c, unsigned int flags)
> >> +{
> >> + struct amdgpu_ras_eeprom_control *control = to_eeprom_control(i2c);
> >> +
> >> + if (!smu_v11_0_i2c_bus_lock(i2c)) {
> >> + DRM_ERROR("Failed to lock the bus from SMU");
> >> + return;
> >> + }
> >> +
> >> + control->bus_locked = true;
> >> +}
> >> +
> >> +static int trylock_bus(struct i2c_adapter *i2c, unsigned int flags)
> >> +{
> >> + WARN_ONCE(1, "This operation not supposed to run in atomic context!");
> >> + return false;
> >> +}
> >> +
> >> +static void unlock_bus(struct i2c_adapter *i2c, unsigned int flags)
> >> +{
> >> + struct amdgpu_ras_eeprom_control *control = to_eeprom_control(i2c);
> >> +
> >> + if (!smu_v11_0_i2c_bus_unlock(i2c)) {
> >> + DRM_ERROR("Failed to unlock the bus from SMU");
> >> + return;
> >> + }
> >> +
> >> + control->bus_locked = false;
> >> +}
> >> +
> >> +static const struct i2c_lock_operations smu_v11_0_i2c_i2c_lock_ops = {
> >> + .lock_bus = lock_bus,
> >> + .trylock_bus = trylock_bus,
> >> + .unlock_bus = unlock_bus,
> >> +};
> >> +
> >> +static int smu_v11_0_i2c_eeprom_i2c_xfer(struct i2c_adapter *i2c_adap,
> >> + struct i2c_msg *msgs, int num)
> >> +{
> >> + int i, ret;
> >> + struct amdgpu_ras_eeprom_control *control = to_eeprom_control(i2c_adap);
> >> +
> >> + if (!control->bus_locked) {
> >> + DRM_ERROR("I2C bus unlocked, stopping transaction!");
> >> + return -EIO;
> >> + }
> >> +
> >> + smu_v11_0_i2c_init(i2c_adap);
> >> +
> >> + for (i = 0; i < num; i++) {
> >> + if (msgs[i].flags & I2C_M_RD)
> >> + ret = smu_v11_0_i2c_eeprom_read_data(i2c_adap,
> >> + (uint8_t)msgs[i].addr,
> >> + msgs[i].buf, msgs[i].len);
> >> + else
> >> + ret = smu_v11_0_i2c_eeprom_write_data(i2c_adap,
> >> + (uint8_t)msgs[i].addr,
> >> + msgs[i].buf, msgs[i].len);
> >> +
> >> + if (ret != I2C_OK) {
> >> + num = -EIO;
> >> + break;
> >> + }
> >> + }
> >> +
> >> + smu_v11_0_i2c_fini(i2c_adap);
> >> + return num;
> >> +}
> >> +
> >> +static u32 smu_v11_0_i2c_eeprom_i2c_func(struct i2c_adapter *adap)
> >> +{
> >> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> >> +}
> >> +
> >> +
> >> +static const struct i2c_algorithm smu_v11_0_i2c_eeprom_i2c_algo = {
> >> + .master_xfer = smu_v11_0_i2c_eeprom_i2c_xfer,
> >> + .functionality = smu_v11_0_i2c_eeprom_i2c_func,
> >> +};
> >> +
> >> +int smu_v11_0_i2c_eeprom_control_init(struct i2c_adapter *control)
> >> +{
> >> + struct amdgpu_device *adev = to_amdgpu_device(control);
> >> + int res;
> >> +
> >> + control->owner = THIS_MODULE;
> >> + control->class = I2C_CLASS_SPD;
> >> + control->dev.parent = &adev->pdev->dev;
> >> + control->algo = &smu_v11_0_i2c_eeprom_i2c_algo;
> >> + snprintf(control->name, sizeof(control->name), "RAS EEPROM");
> >> + control->lock_ops = &smu_v11_0_i2c_i2c_lock_ops;
> >> +
> >> + res = i2c_add_adapter(control);
> >> + if (res)
> >> + DRM_ERROR("Failed to register hw i2c, err: %d\n", res);
> >> +
> >> + return res;
> >> +}
> >> +
> >> +void smu_v11_0_i2c_eeprom_control_fini(struct i2c_adapter *control)
> >> +{
> >> + i2c_del_adapter(control);
> >> +}
> >> +
> >> +#define I2C_TARGET_ADDR 0xA0
> >> +
> >> +bool smu_v11_0_i2c_test_bus(struct i2c_adapter *control)
> >> +{
> >> +
> >> + uint32_t ret = I2C_OK;
> >> + uint8_t data[6] = {0xf, 0, 0xde, 0xad, 0xbe, 0xef};
> >> +
> >> +
> >> + DRM_INFO("Begin");
> >> +
> >> + if (!smu_v11_0_i2c_bus_lock(control)) {
> >> + DRM_ERROR("Failed to lock the bus!.");
> >> + return false;
> >> + }
> >> +
> >> + smu_v11_0_i2c_init(control);
> >> +
> >> + /* Write 0xde to address 0x0000 on the EEPROM */
> >> + ret = smu_v11_0_i2c_eeprom_write_data(control, I2C_TARGET_ADDR, data, 6);
> >> +
> >> + ret = smu_v11_0_i2c_eeprom_read_data(control, I2C_TARGET_ADDR, data, 6);
> >> +
> >> + smu_v11_0_i2c_fini(control);
> >> +
> >> + smu_v11_0_i2c_bus_unlock(control);
> >> +
> >> +
> >> + DRM_INFO("End");
> >> + return true;
> >> +}
> > Leftover debugging function?
> >
> >> diff --git a/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.h b/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.h
> >> new file mode 100644
> >> index 0000000..973f28d
> >> --- /dev/null
> >> +++ b/drivers/gpu/drm/amd/amdgpu/smu_v11_0_i2c.h
> >> @@ -0,0 +1,34 @@
> >> +/*
> >> + * Copyright 2019 Advanced Micro Devices, Inc.
> >> + *
> >> + * Permission is hereby granted, free of charge, to any person obtaining a
> >> + * copy of this software and associated documentation files (the "Software"),
> >> + * to deal in the Software without restriction, including without limitation
> >> + * the rights to use, copy, modify, merge, publish, distribute, sublicense,
> >> + * and/or sell copies of the Software, and to permit persons to whom the
> >> + * Software is furnished to do so, subject to the following conditions:
> >> + *
> >> + * The above copyright notice and this permission notice shall be included in
> >> + * all copies or substantial portions of the Software.
> >> + *
> >> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
> >> + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
> >> + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
> >> + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
> >> + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
> >> + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> >> + * OTHER DEALINGS IN THE SOFTWARE.
> >> + *
> >> + */
> >> +
> >> +#ifndef SMU_V11_I2C_CONTROL_H
> >> +#define SMU_V11_I2C_CONTROL_H
> >> +
> >> +#include <linux/types.h>
> >> +
> >> +struct i2c_adapter;
> >> +
> >> +int smu_v11_0_i2c_eeprom_control_init(struct i2c_adapter *control);
> >> +void smu_v11_0_i2c_eeprom_control_fini(struct i2c_adapter *control);
> >> +
> >> +#endif
> >> --
> >> 2.7.4
> >>
> >> _______________________________________________
> >> amd-gfx mailing list
> >> amd-gfx at lists.freedesktop.org
> >> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
More information about the amd-gfx
mailing list