[PATCH 21/39] drm/amd/display: Map ODM memory correctly when doing ODM combine

[Rodrigo Siqueira]

From: Nikola Cornij <nikola.cornij at amd.com>

[why]
Up to 4 ODM memory pieces are required per ODM combine and cannot
overlap, i.e. each ODM "session" has to use its own memory pieces.
The ODM-memory mapping is currently broken for generic case.

The maximum number of memory pieces is ASIC-dependent, but it's always
big enough to satisfy maximum number of ODM combines. Memory pieces
are mapped as a bit-map, i.e. one memory piece corresponds to one bit.
The OPTC doing ODM needs to select memory pieces by setting the
corresponding bits, making sure there's no overlap with other OPTC
instances that might be doing ODM.

The current mapping works only for OPTC instance indexes smaller than
3. For instance indexes 3 and up it practically maps no ODM memory,
causing black, gray or white screen in display configs that include
ODM on OPTC instance 3 or up.

[how]
Statically map two unique ODM memory pieces for each OPTC instance
and piece them together when programming ODM combine mode.

Signed-off-by: Nikola Cornij <nikola.cornij at amd.com>
Reviewed-by: Jun Lei <Jun.Lei at amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira at amd.com>
---
 .../gpu/drm/amd/display/dc/dcn20/dcn20_optc.c    | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
index 673c83e2afd4..9b36fec549d7 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn20/dcn20_optc.c
@@ -236,12 +236,13 @@ void optc2_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_c
 		struct dc_crtc_timing *timing)
 {
 	struct optc *optc1 = DCN10TG_FROM_TG(optc);
-	/* 2 pieces of memory required for up to 5120 displays, 4 for up to 8192 */
 	int mpcc_hactive = (timing->h_addressable + timing->h_border_left + timing->h_border_right)
 			/ opp_cnt;
-	int memory_mask = mpcc_hactive <= 2560 ? 0x3 : 0xf;
+	uint32_t memory_mask;
 	uint32_t data_fmt = 0;
 
+	ASSERT(opp_cnt == 2);
+
 	/* TODO: In pseudocode but does not affect maximus, delete comment if we dont need on asic
 	 * REG_SET(OTG_GLOBAL_CONTROL2, 0, GLOBAL_UPDATE_LOCK_EN, 1);
 	 * Program OTG register MASTER_UPDATE_LOCK_DB_X/Y to the position before DP frame start
@@ -249,9 +250,17 @@ void optc2_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_c
 	 *		MASTER_UPDATE_LOCK_DB_X, 160,
 	 *		MASTER_UPDATE_LOCK_DB_Y, 240);
 	 */
+
+	/* 2 pieces of memory required for up to 5120 displays, 4 for up to 8192,
+	 * however, for ODM combine we can simplify by always using 4.
+	 * To make sure there's no overlap, each instance "reserves" 2 memories and
+	 * they are uniquely combined here.
+	 */
+	memory_mask = 0x3 << (opp_id[0] * 2) | 0x3 << (opp_id[1] * 2);
+
 	if (REG(OPTC_MEMORY_CONFIG))
 		REG_SET(OPTC_MEMORY_CONFIG, 0,
-			OPTC_MEM_SEL, memory_mask << (optc->inst * 4));
+			OPTC_MEM_SEL, memory_mask);
 
 	if (timing->pixel_encoding == PIXEL_ENCODING_YCBCR422)
 		data_fmt = 1;
@@ -260,7 +269,6 @@ void optc2_set_odm_combine(struct timing_generator *optc, int *opp_id, int opp_c
 
 	REG_UPDATE(OPTC_DATA_FORMAT_CONTROL, OPTC_DATA_FORMAT, data_fmt);
 
-	ASSERT(opp_cnt == 2);
 	REG_SET_3(OPTC_DATA_SOURCE_SELECT, 0,
 			OPTC_NUM_OF_INPUT_SEGMENT, 1,
 			OPTC_SEG0_SRC_SEL, opp_id[0],
-- 
2.24.0