[PATCH 34/35] drm/amd/display: refactor init_hw to isolate pipe related init
Bhawanpreet Lakha
Bhawanpreet.Lakha at amd.com
Fri Feb 1 15:28:46 UTC 2019
From: Anthony Koo <Anthony.Koo at amd.com>
[Why]
Pipe related init is possible to optimized if we know what we
intend to program, and if we can determine it matches what is
already programmed for the pipe.
[How]
First step is to isolate the pipe related init code
Change-Id: Idc1c378a0eea78b8d93faced686b19d9b14f77f3
Signed-off-by: Anthony Koo <Anthony.Koo at amd.com>
Reviewed-by: Aric Cyr <Aric.Cyr at amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha at amd.com>
---
.../display/dc/dce110/dce110_hw_sequencer.c | 6 +
.../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 159 +++++++++---------
.../gpu/drm/amd/display/dc/inc/hw_sequencer.h | 2 +
3 files changed, 85 insertions(+), 82 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index cc81ec6e9134..392781bfb7a5 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -2275,6 +2275,11 @@ static void dce110_enable_per_frame_crtc_position_reset(
}
+static void init_pipes(struct dc *dc, struct dc_state *context)
+{
+ // Do nothing
+}
+
static void init_hw(struct dc *dc)
{
int i;
@@ -2642,6 +2647,7 @@ static const struct hw_sequencer_funcs dce110_funcs = {
.program_gamut_remap = program_gamut_remap,
.program_output_csc = program_output_csc,
.init_hw = init_hw,
+ .init_pipes = init_pipes,
.apply_ctx_to_hw = dce110_apply_ctx_to_hw,
.apply_ctx_for_surface = dce110_apply_ctx_for_surface,
.update_plane_addr = update_plane_addr,
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index a03bbbf94d5d..117d9d8227f7 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -956,97 +956,34 @@ static void dcn10_disable_plane(struct dc *dc, struct pipe_ctx *pipe_ctx)
pipe_ctx->pipe_idx);
}
-static void dcn10_init_hw(struct dc *dc)
+static void dcn10_init_pipes(struct dc *dc, struct dc_state *context)
{
int i;
- struct abm *abm = dc->res_pool->abm;
- struct dmcu *dmcu = dc->res_pool->dmcu;
- struct dce_hwseq *hws = dc->hwseq;
- struct dc_bios *dcb = dc->ctx->dc_bios;
- struct dc_state *context = dc->current_state;
-
- if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
- REG_WRITE(REFCLK_CNTL, 0);
- REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
- REG_WRITE(DIO_MEM_PWR_CTRL, 0);
-
- if (!dc->debug.disable_clock_gate) {
- /* enable all DCN clock gating */
- REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0);
-
- REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0);
-
- REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);
- }
-
- enable_power_gating_plane(dc->hwseq, true);
- } else {
-
- if (!dcb->funcs->is_accelerated_mode(dcb)) {
- bool allow_self_fresh_force_enable =
- hububu1_is_allow_self_refresh_enabled(dc->res_pool->hubbub);
-
- bios_golden_init(dc);
-
- /* WA for making DF sleep when idle after resume from S0i3.
- * DCHUBBUB_ARB_ALLOW_SELF_REFRESH_FORCE_ENABLE is set to 1 by
- * command table, if DCHUBBUB_ARB_ALLOW_SELF_REFRESH_FORCE_ENABLE = 0
- * before calling command table and it changed to 1 after,
- * it should be set back to 0.
- */
- if (allow_self_fresh_force_enable == false &&
- hububu1_is_allow_self_refresh_enabled(dc->res_pool->hubbub))
- hubbub1_allow_self_refresh_control(dc->res_pool->hubbub, true);
-
- disable_vga(dc->hwseq);
- }
-
- for (i = 0; i < dc->link_count; i++) {
- /* Power up AND update implementation according to the
- * required signal (which may be different from the
- * default signal on connector).
- */
- struct dc_link *link = dc->links[i];
-
- if (link->link_enc->connector.id == CONNECTOR_ID_EDP)
- dc->hwss.edp_power_control(link, true);
-
- link->link_enc->funcs->hw_init(link->link_enc);
-
- /* Check for enabled DIG to identify enabled display */
- if (link->link_enc->funcs->is_dig_enabled &&
- link->link_enc->funcs->is_dig_enabled(link->link_enc))
- link->link_status.link_active = true;
- }
- }
for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct timing_generator *tg = dc->res_pool->timing_generators[i];
if (tg->funcs->is_tg_enabled(tg))
tg->funcs->lock(tg);
- }
-
- /* Blank controller using driver code instead of
- * command table.
- */
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct timing_generator *tg = dc->res_pool->timing_generators[i];
+ /* Blank controller using driver code instead of
+ * command table.
+ */
if (tg->funcs->is_tg_enabled(tg)) {
tg->funcs->set_blank(tg, true);
hwss_wait_for_blank_complete(tg);
}
}
- /* Reset all MPCC muxes */
dc->res_pool->mpc->funcs->mpc_init(dc->res_pool->mpc);
- for (i = 0; i < dc->res_pool->timing_generator_count; i++) {
+ for (i = 0; i < dc->res_pool->pipe_count; i++) {
struct timing_generator *tg = dc->res_pool->timing_generators[i];
- struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
struct hubp *hubp = dc->res_pool->hubps[i];
struct dpp *dpp = dc->res_pool->dpps[i];
+ struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
+
+ dpp->funcs->dpp_reset(dpp);
pipe_ctx->stream_res.tg = tg;
pipe_ctx->pipe_idx = i;
@@ -1064,18 +1001,9 @@ static void dcn10_init_hw(struct dc *dc)
pipe_ctx->stream_res.opp = dc->res_pool->opps[i];
hwss1_plane_atomic_disconnect(dc, pipe_ctx);
- }
-
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct timing_generator *tg = dc->res_pool->timing_generators[i];
if (tg->funcs->is_tg_enabled(tg))
tg->funcs->unlock(tg);
- }
-
- for (i = 0; i < dc->res_pool->pipe_count; i++) {
- struct timing_generator *tg = dc->res_pool->timing_generators[i];
- struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
dcn10_disable_plane(dc, pipe_ctx);
@@ -1084,10 +1012,73 @@ static void dcn10_init_hw(struct dc *dc)
tg->funcs->tg_init(tg);
}
+}
+
+static void dcn10_init_hw(struct dc *dc)
+{
+ int i;
+ struct abm *abm = dc->res_pool->abm;
+ struct dmcu *dmcu = dc->res_pool->dmcu;
+ struct dce_hwseq *hws = dc->hwseq;
+ struct dc_bios *dcb = dc->ctx->dc_bios;
+
+ if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment)) {
+ REG_WRITE(REFCLK_CNTL, 0);
+ REG_UPDATE(DCHUBBUB_GLOBAL_TIMER_CNTL, DCHUBBUB_GLOBAL_TIMER_ENABLE, 1);
+ REG_WRITE(DIO_MEM_PWR_CTRL, 0);
- /* end of FPGA. Below if real ASIC */
- if (IS_FPGA_MAXIMUS_DC(dc->ctx->dce_environment))
+ if (!dc->debug.disable_clock_gate) {
+ /* enable all DCN clock gating */
+ REG_WRITE(DCCG_GATE_DISABLE_CNTL, 0);
+
+ REG_WRITE(DCCG_GATE_DISABLE_CNTL2, 0);
+
+ REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0);
+ }
+
+ enable_power_gating_plane(dc->hwseq, true);
+
+ /* end of FPGA. Below if real ASIC */
return;
+ }
+
+ if (!dcb->funcs->is_accelerated_mode(dcb)) {
+ bool allow_self_fresh_force_enable =
+ hububu1_is_allow_self_refresh_enabled(
+ dc->res_pool->hubbub);
+
+ bios_golden_init(dc);
+
+ /* WA for making DF sleep when idle after resume from S0i3.
+ * DCHUBBUB_ARB_ALLOW_SELF_REFRESH_FORCE_ENABLE is set to 1 by
+ * command table, if DCHUBBUB_ARB_ALLOW_SELF_REFRESH_FORCE_ENABLE = 0
+ * before calling command table and it changed to 1 after,
+ * it should be set back to 0.
+ */
+ if (allow_self_fresh_force_enable == false &&
+ hububu1_is_allow_self_refresh_enabled(dc->res_pool->hubbub))
+ hubbub1_allow_self_refresh_control(dc->res_pool->hubbub, true);
+
+ disable_vga(dc->hwseq);
+ }
+
+ for (i = 0; i < dc->link_count; i++) {
+ /* Power up AND update implementation according to the
+ * required signal (which may be different from the
+ * default signal on connector).
+ */
+ struct dc_link *link = dc->links[i];
+
+ if (link->link_enc->connector.id == CONNECTOR_ID_EDP)
+ dc->hwss.edp_power_control(link, true);
+
+ link->link_enc->funcs->hw_init(link->link_enc);
+
+ /* Check for enabled DIG to identify enabled display */
+ if (link->link_enc->funcs->is_dig_enabled &&
+ link->link_enc->funcs->is_dig_enabled(link->link_enc))
+ link->link_status.link_active = true;
+ }
for (i = 0; i < dc->res_pool->audio_count; i++) {
struct audio *audio = dc->res_pool->audios[i];
@@ -1118,6 +1109,9 @@ static void dcn10_init_hw(struct dc *dc)
enable_power_gating_plane(dc->hwseq, true);
memset(&dc->res_pool->clk_mgr->clks, 0, sizeof(dc->res_pool->clk_mgr->clks));
+
+ if (dc->hwss.init_pipes)
+ dc->hwss.init_pipes(dc, dc->current_state);
}
static void reset_hw_ctx_wrap(
@@ -2718,6 +2712,7 @@ static void dcn10_set_cursor_sdr_white_level(struct pipe_ctx *pipe_ctx)
static const struct hw_sequencer_funcs dcn10_funcs = {
.program_gamut_remap = program_gamut_remap,
.init_hw = dcn10_init_hw,
+ .init_pipes = dcn10_init_pipes,
.apply_ctx_to_hw = dce110_apply_ctx_to_hw,
.apply_ctx_for_surface = dcn10_apply_ctx_for_surface,
.update_plane_addr = dcn10_update_plane_addr,
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
index d6a85f48b6d1..341b4810288c 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw_sequencer.h
@@ -70,6 +70,8 @@ struct hw_sequencer_funcs {
void (*init_hw)(struct dc *dc);
+ void (*init_pipes)(struct dc *dc, struct dc_state *context);
+
enum dc_status (*apply_ctx_to_hw)(
struct dc *dc, struct dc_state *context);
--
2.17.1
More information about the amd-gfx
mailing list