[PATCH 2/2] Revert "drm/amdgpu: Fix bugs in setting CP RB/MEC DOORBELL_RANGE registers"

Zhao, Yong Yong.Zhao at amd.com
Tue Feb 19 16:29:09 UTC 2019


The original change caused regression, so revert it until the new fix is
ready.
https://bugs.freedesktop.org/show_bug.cgi?id=109650

This reverts commit 764c85fef41722db0f21558c6c2fb38bee172d19.

Change-Id: I6c634d8bdb98efcfdec33581d92f7ba02416061b
Signed-off-by: Yong Zhao <Yong.Zhao at amd.com>
---
 drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c | 19 ++++---------------
 drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 19 +++++--------------
 2 files changed, 9 insertions(+), 29 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
index 41cf9d0224d9..b8e50a34bdb3 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v8_0.c
@@ -4223,8 +4223,8 @@ static void gfx_v8_0_set_cpg_door_bell(struct amdgpu_device *adev, struct amdgpu
 					adev->doorbell_index.gfx_ring0);
 	WREG32(mmCP_RB_DOORBELL_RANGE_LOWER, tmp);
 
-	/* There is only one GFX queue */
-	WREG32(mmCP_RB_DOORBELL_RANGE_UPPER, tmp);
+	WREG32(mmCP_RB_DOORBELL_RANGE_UPPER,
+		CP_RB_DOORBELL_RANGE_UPPER__DOORBELL_RANGE_UPPER_MASK);
 }
 
 static int gfx_v8_0_cp_gfx_resume(struct amdgpu_device *adev)
@@ -4646,19 +4646,8 @@ static int gfx_v8_0_kcq_init_queue(struct amdgpu_ring *ring)
 static void gfx_v8_0_set_mec_doorbell_range(struct amdgpu_device *adev)
 {
 	if (adev->asic_type > CHIP_TONGA) {
-		/* The first few doorbells in pci doorbell bar are for GFX RB
-		 * rings and all the leftover for MEC.
-		 * So CP_MEC_DOORBELL_RANGE_LOWER should be set one index after
-		 * CP_RB_DOORBELL_RANGE_UPPER, as we assume there is only one
-		 * GFX RB rings.
-		 */
-		u32 tmp = REG_SET_FIELD(0, CP_MEC_DOORBELL_RANGE_LOWER,
-				DOORBELL_RANGE_LOWER,
-				adev->gfx.gfx_ring[0].doorbell_index + 1);
-
-		WREG32(mmCP_MEC_DOORBELL_RANGE_LOWER, tmp);
-		WREG32(mmCP_MEC_DOORBELL_RANGE_UPPER,
-				CP_MEC_DOORBELL_RANGE_UPPER__DOORBELL_RANGE_UPPER_MASK);
+		WREG32(mmCP_MEC_DOORBELL_RANGE_LOWER, adev->doorbell_index.kiq << 2);
+		WREG32(mmCP_MEC_DOORBELL_RANGE_UPPER, adev->doorbell_index.mec_ring7 << 2);
 	}
 	/* enable doorbells */
 	WREG32_FIELD(CP_PQ_STATUS, DOORBELL_ENABLE, 1);
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
index 36f417fd6ba9..5533f6e4f4a4 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c
@@ -2631,8 +2631,8 @@ static int gfx_v9_0_cp_gfx_resume(struct amdgpu_device *adev)
 			DOORBELL_RANGE_LOWER, ring->doorbell_index);
 	WREG32_SOC15(GC, 0, mmCP_RB_DOORBELL_RANGE_LOWER, tmp);
 
-	/* There is only one GFX queue */
-	WREG32_SOC15(GC, 0, mmCP_RB_DOORBELL_RANGE_UPPER, tmp);
+	WREG32_SOC15(GC, 0, mmCP_RB_DOORBELL_RANGE_UPPER,
+		       CP_RB_DOORBELL_RANGE_UPPER__DOORBELL_RANGE_UPPER_MASK);
 
 
 	/* start the ring */
@@ -2995,19 +2995,10 @@ static int gfx_v9_0_kiq_init_register(struct amdgpu_ring *ring)
 
 	/* enable the doorbell if requested */
 	if (ring->use_doorbell) {
-		/* The first few doorbells in pci doorbell bar are for GFX RB
-		 * rings and all the leftover for MEC.
-		 * So CP_MEC_DOORBELL_RANGE_LOWER should be set one index after
-		 * CP_RB_DOORBELL_RANGE_UPPER, as we assume there is only one
-		 * GFX RB rings.
-		 */
-		u32 tmp = REG_SET_FIELD(0, CP_MEC_DOORBELL_RANGE_LOWER,
-				DOORBELL_RANGE_LOWER,
-				adev->gfx.gfx_ring[0].doorbell_index + 2);
-
-		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER, tmp);
+		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_LOWER,
+					(adev->doorbell_index.kiq * 2) << 2);
 		WREG32_SOC15(GC, 0, mmCP_MEC_DOORBELL_RANGE_UPPER,
-				CP_MEC_DOORBELL_RANGE_UPPER__DOORBELL_RANGE_UPPER_MASK);
+					(adev->doorbell_index.userqueue_end * 2) << 2);
 	}
 
 	WREG32_SOC15(GC, 0, mmCP_HQD_PQ_DOORBELL_CONTROL,
-- 
2.17.1



More information about the amd-gfx mailing list