[PATCH 20/26] drm/amd/powerplay: add override pcie parameters
Huang Rui
ray.huang at amd.com
Mon Feb 25 12:12:26 UTC 2019
From: Likun Gao <Likun.Gao at amd.com>
PCIE parameters should be override to fix the conflict between the ASIC
capabilities and the system capabilities.
Signed-off-by: Likun Gao <Likun.Gao at amd.com>
Reviewed-by: Gui Chengming <Jack.Gui at amd.com>
Reviewed-by: Huang Rui <ray.huang at amd.com>
---
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 46 ++++++++++++++++++++++++++++++
1 file changed, 46 insertions(+)
diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index 118347c..876b688 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -28,6 +28,7 @@
#include "soc15_common.h"
#include "smu_v11_0.h"
#include "atom.h"
+#include "amd_pcie.h"
int smu_dpm_set_power_gate(struct smu_context *smu, uint32_t block_type,
bool gate)
@@ -533,6 +534,47 @@ static int smu_fini_fb_allocations(struct smu_context *smu)
return 0;
}
+static int smu_override_pcie_parameters(struct smu_context *smu)
+{
+ struct amdgpu_device *adev = smu->adev;
+ uint32_t pcie_gen = 0, pcie_width = 0, smu_pcie_arg;
+ int ret;
+
+ if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN4)
+ pcie_gen = 3;
+ else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN3)
+ pcie_gen = 2;
+ else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN2)
+ pcie_gen = 1;
+ else if (adev->pm.pcie_gen_mask & CAIL_PCIE_LINK_SPEED_SUPPORT_GEN1)
+ pcie_gen = 0;
+
+ /* Bit 31:16: LCLK DPM level. 0 is DPM0, and 1 is DPM1
+ * Bit 15:8: PCIE GEN, 0 to 3 corresponds to GEN1 to GEN4
+ * Bit 7:0: PCIE lane width, 1 to 7 corresponds is x1 to x32
+ */
+ if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X16)
+ pcie_width = 6;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X12)
+ pcie_width = 5;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X8)
+ pcie_width = 4;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X4)
+ pcie_width = 3;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X2)
+ pcie_width = 2;
+ else if (adev->pm.pcie_mlw_mask & CAIL_PCIE_LINK_WIDTH_SUPPORT_X1)
+ pcie_width = 1;
+
+ smu_pcie_arg = (1 << 16) | (pcie_gen << 8) | pcie_width;
+ ret = smu_send_smc_msg_with_param(smu,
+ SMU_MSG_OverridePcieParameters,
+ smu_pcie_arg);
+ if (ret)
+ pr_err("[%s] Attempt to override pcie params failed!\n", __func__);
+ return ret;
+}
+
static int smu_smc_table_hw_init(struct smu_context *smu,
bool initialize)
{
@@ -620,6 +662,10 @@ static int smu_smc_table_hw_init(struct smu_context *smu,
if (ret)
return ret;
+ ret = smu_override_pcie_parameters(smu);
+ if (ret)
+ return ret;
+
ret = smu_notify_display_change(smu);
if (ret)
return ret;
--
2.7.4
More information about the amd-gfx
mailing list