[PATCH] drm/amd/powerplay: correct the bit mask for checking VCN power status

[Evan Quan]

For Navi10 or later ASICs, a different bit mask is used for checking
VCN power status.

Change-Id: Iaa49e5a339c38f46e3e7124d21aeb65f6633325e
Signed-off-by: Evan Quan <evan.quan at amd.com>
---
 drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index 6e2f7df826f0..887577c47568 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -271,6 +271,8 @@ int smu_get_power_num_states(struct smu_context *smu,
 int smu_common_read_sensor(struct smu_context *smu, enum amd_pp_sensors sensor,
 			   void *data, uint32_t *size)
 {
+	struct amdgpu_device *adev = smu->adev;
+	uint32_t uvd_bit_mask = 0xFFFFFFFF;
 	int ret = 0;
 
 	switch (sensor) {
@@ -287,7 +289,11 @@ int smu_common_read_sensor(struct smu_context *smu, enum amd_pp_sensors sensor,
 		*size = 8;
 		break;
 	case AMDGPU_PP_SENSOR_UVD_POWER:
-		*(uint32_t *)data = smu_feature_is_enabled(smu, SMU_FEATURE_DPM_UVD_BIT) ? 1 : 0;
+		if (adev->asic_type == CHIP_VEGA20)
+			uvd_bit_mask = SMU_FEATURE_DPM_UVD_BIT;
+		else
+			uvd_bit_mask = SMU_FEATURE_VCN_PG_BIT;
+		*(uint32_t *)data = smu_feature_is_enabled(smu, uvd_bit_mask) ? 1 : 0;
 		*size = 4;
 		break;
 	case AMDGPU_PP_SENSOR_VCE_POWER:
-- 
2.22.0