[PATCH] drm/amdgpu: Need to set the baco cap before baco reset

Yang, Philip Philip.Yang at amd.com
Fri Jun 14 14:15:38 UTC 2019


Hi Emily,

I am not familiar with vbios and driver init part, just based on my 
experience, the patch don't modify amdgpu_get_bios but move 
amdgpu_get_bios to amdgpu_device_ip_early_init from amdgpu_device_init, 
so amdgpu_get_bios is executed earlier. The kernel error message "BUG: 
kernel NULL pointer dereference" means something is not initialized. 
Please review the change. This issue blocks rocm release now.

Regards,
Philip

On 2019-06-13 11:19 p.m., Deng, Emily wrote:
> Hi Russell,
>       This patch will read vbios, and parse vbios to get the baco reset feature bit.  From the call trace, it shows error in " amdgpu_get_bios ", but this patch don't modify amdgpu_get_bios, and code before amdgpu_get_bios. Please first check why it will has error when read vbios.
> 
> Best wishes
> Emily Deng
> 
> 
> 
>> -----Original Message-----
>> From: Russell, Kent <Kent.Russell at amd.com>
>> Sent: Thursday, June 13, 2019 7:11 PM
>> To: Quan, Evan <Evan.Quan at amd.com>; Deng, Emily
>> <Emily.Deng at amd.com>; amd-gfx at lists.freedesktop.org
>> Cc: Deng, Emily <Emily.Deng at amd.com>
>> Subject: RE: [PATCH] drm/amdgpu: Need to set the baco cap before baco reset
>>
>> Hi Emily,
>>
>> This patch caused a regression on MI25 (Chip 6860, VBIOS 113-D0513700-001)
>> machines where the driver would not boot. Note that this was not seen on
>> Vega10 Frontier (Chip 6863, VBIOS 113-D0501100-X09) or Radeon64 (Chip
>> 697f). Reverting this patch resolved the issue with no other work required and
>> was confirmed on all 3 machines.
>>
>> Here is the dmesg:
>>
>> [    3.908653] amdgpu 0000:23:00.0: BAR 6: can't assign [??? 0x00000000 flags
>> 0x20000000] (bogus alignment)
>> [    3.908692] BUG: kernel NULL pointer dereference, address:
>> 0000000000000008
>> [    3.908716] #PF: supervisor read access in kernel mode
>> [    3.908734] #PF: error_code(0x0000) - not-present page
>> [    3.908753] PGD 0 P4D 0
>> [    3.908767] Oops: 0000 [#1] SMP NOPTI
>> [    3.909293] CPU: 8 PID: 409 Comm: kworker/8:1 Not tainted 5.2.0-rc1-kfd-
>> compute-roc-master-10734 #1
>> [    3.909753] Hardware name: Inventec     P47                              WC2071019001
>> /P47             , BIOS 0.64 04/09/2018
>> [    3.910534] Workqueue: events work_for_cpu_fn
>> [    3.910953] RIP: 0010:amdgpu_get_bios+0x3aa/0x580 [amdgpu]
>> [    3.911314] Code: c0 48 c7 44 24 5c 00 00 00 00 48 c7 84 24 90 00 00 00 00 00
>> 00 00 48 89 d9 48 29 f9 83 c1 3c c1 e9 03 f3 48 ab 49 8b 44 24 38 <48> 8b 40 08
>> 48 85 c0 74 24 ba 3c 00 00 00 48 89 de 4c 89 e7 ff d0
>> [    3.912069] RSP: 0018:ffffa27dce28fc50 EFLAGS: 00010212
>> [    3.912502] RAX: 0000000000000000 RBX: ffffa27dce28fcac RCX:
>> 0000000000000000
>> [    3.912980] RDX: 0000000000000000 RSI: 0000000000000082 RDI:
>> ffffa27dce28fce8
>> [    3.913467] RBP: 0000000000000000 R08: 0000000000000001 R09:
>> 000000000000079a
>> [    3.913940] R10: 0000000000000000 R11: 0000000000000001 R12:
>> ffff88d657af0000
>> [    3.914349] R13: ffffffffc0c38120 R14: ffffa27dce28fc68 R15:
>> ffff88d657af0000
>> [    3.914767] FS:  0000000000000000(0000) GS:ffff88d65f400000(0000)
>> knlGS:0000000000000000
>> [    3.915203] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
>> [    3.915637] CR2: 0000000000000008 CR3: 0000003e7540a000 CR4:
>> 00000000003406e0
>> [    3.916075] Call Trace:
>> [    3.916522]  ? pcie_capability_clear_and_set_word+0x53/0x80
>> [    3.917014]  amdgpu_device_init+0x923/0x1820 [amdgpu]
>> [    3.917515]  amdgpu_driver_load_kms+0x71/0x310 [amdgpu]
>> [    3.917997]  drm_dev_register+0x113/0x1a0 [drm]
>> [    3.918514]  amdgpu_pci_probe+0xb8/0x150 [amdgpu]
>> [    3.919003]  ? __pm_runtime_resume+0x54/0x70
>> [    3.919270] usb 1-2: New USB device found, idVendor=14dd, idProduct=1005,
>> bcdDevice= 0.00
>> [    3.919498]  local_pci_probe+0x3d/0x90
>> [    3.919503]  ? __schedule+0x3de/0x690
>> [    3.920374] usb 1-2: New USB device strings: Mfr=1, Product=2,
>> SerialNumber=3
>> [    3.921137]  work_for_cpu_fn+0x10/0x20
>> [    3.922028] usb 1-2: Product: D2CIM-VUSB
>> [    3.922815]  process_one_work+0x159/0x3e0
>> [    3.923633] usb 1-2: Manufacturer: Raritan
>> [    3.923635] usb 1-2: SerialNumber: EFFB212D0A6E32F
>> [    3.924416]  worker_thread+0x22b/0x440
>> [    3.924419]  ? rescuer_thread+0x350/0x350
>> [    3.927812]  kthread+0xf6/0x130
>> [    3.928157] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
>> [    3.928365]  ? kthread_destroy_worker+0x40/0x40
>> [    3.929401] ata1.00: ATA-10: INTEL SSDSC2KG960G7, SCV10100, max
>> UDMA/133
>> [    3.930101]  ret_from_fork+0x1f/0x30
>> [    3.930103] Modules linked in: amdgpu(+) crct10dif_pclmul crc32_pclmul
>> ghash_clmulni_intel ast amd_iommu_v2 aesni_intel gpu_sched i2c_algo_bit
>> aes_x86_64 ttm crypto_simd drm_kms_helper cryptd glue_helper
>> syscopyarea sysfillrect ahci sysimgblt libahci fb_sys_fops ixgbe(+) drm dca
>> mdio
>> [    3.930965] ata1.00: 1875385008 sectors, multi 1: LBA48 NCQ (depth 32)
>> [    3.931085] ata1.00: configured for UDMA/133
>> [    3.931809] CR2: 0000000000000008
>> [    3.934723] scsi 0:0:0:0: Direct-Access     ATA      INTEL SSDSC2KG96 0100 PQ:
>> 0 ANSI: 5
>>
>>
>> Thanks!
>>
>> Kent
>>
>> -----Original Message-----
>> From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> On Behalf Of Quan,
>> Evan
>> Sent: Monday, May 27, 2019 9:17 PM
>> To: Deng, Emily <Emily.Deng at amd.com>; amd-gfx at lists.freedesktop.org
>> Cc: Deng, Emily <Emily.Deng at amd.com>
>> Subject: RE: [PATCH] drm/amdgpu: Need to set the baco cap before baco reset
>>
>> Reviewed-by: Evan Quan <evan.quan at amd.com>
>>
>>> -----Original Message-----
>>> From: amd-gfx <amd-gfx-bounces at lists.freedesktop.org> On Behalf Of
>>> Emily Deng
>>> Sent: Monday, May 27, 2019 3:43 PM
>>> To: amd-gfx at lists.freedesktop.org
>>> Cc: Deng, Emily <Emily.Deng at amd.com>
>>> Subject: [PATCH] drm/amdgpu: Need to set the baco cap before baco
>>> reset
>>>
>>> For passthrough, after rebooted the VM, driver will do a baco reset
>>> before doing other driver initialization during loading  driver. For
>>> doing the baco reset, it will first check the baco reset capability.
>>> So first need to set the cap from the vbios information or baco reset won't
>> be enabled.
>>>
>>> Signed-off-by: Emily Deng <Emily.Deng at amd.com>
>>> ---
>>>   drivers/gpu/drm/amd/amdgpu/amdgpu_device.c         | 24 ++++++++++-----
>>> -------
>>>   drivers/gpu/drm/amd/amdgpu/soc15.c                 |  3 ++-
>>>   drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c |  4 ++++
>>>   .../amd/powerplay/hwmgr/vega10_processpptables.c   | 24
>>> ++++++++++++++++++++++
>>>   .../amd/powerplay/hwmgr/vega10_processpptables.h   |  1 +
>>>   5 files changed, 42 insertions(+), 14 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>> index b6ded84..7a8c220 100644
>>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
>>> @@ -1541,6 +1541,17 @@ static int amdgpu_device_ip_early_init(struct
>>> amdgpu_device *adev)
>>>   	if (amdgpu_sriov_vf(adev))
>>>   		adev->pm.pp_feature &= ~PP_GFXOFF_MASK;
>>>
>>> +	/* Read BIOS */
>>> +	if (!amdgpu_get_bios(adev))
>>> +		return -EINVAL;
>>> +
>>> +	r = amdgpu_atombios_init(adev);
>>> +	if (r) {
>>> +		dev_err(adev->dev, "amdgpu_atombios_init failed\n");
>>> +		amdgpu_vf_error_put(adev,
>>> AMDGIM_ERROR_VF_ATOMBIOS_INIT_FAIL, 0, 0);
>>> +		return r;
>>> +	}
>>> +
>>>   	for (i = 0; i < adev->num_ip_blocks; i++) {
>>>   		if ((amdgpu_ip_block_mask & (1 << i)) == 0) {
>>>   			DRM_ERROR("disabled ip block: %d <%s>\n", @@ -
>>> 2591,19 +2602,6 @@ int amdgpu_device_init(struct amdgpu_device *adev,
>>>   		goto fence_driver_init;
>>>   	}
>>>
>>> -	/* Read BIOS */
>>> -	if (!amdgpu_get_bios(adev)) {
>>> -		r = -EINVAL;
>>> -		goto failed;
>>> -	}
>>> -
>>> -	r = amdgpu_atombios_init(adev);
>>> -	if (r) {
>>> -		dev_err(adev->dev, "amdgpu_atombios_init failed\n");
>>> -		amdgpu_vf_error_put(adev,
>>> AMDGIM_ERROR_VF_ATOMBIOS_INIT_FAIL, 0, 0);
>>> -		goto failed;
>>> -	}
>>> -
>>>   	/* detect if we are with an SRIOV vbios */
>>>   	amdgpu_device_detect_sriov_bios(adev);
>>>
>>> diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c
>>> b/drivers/gpu/drm/amd/amdgpu/soc15.c
>>> index 78bd4fc..d9fdd95 100644
>>> --- a/drivers/gpu/drm/amd/amdgpu/soc15.c
>>> +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
>>> @@ -764,7 +764,8 @@ static bool soc15_need_reset_on_init(struct
>>> amdgpu_device *adev)
>>>   	/* Just return false for soc15 GPUs.  Reset does not seem to
>>>   	 * be necessary.
>>>   	 */
>>> -	return false;
>>> +	if (!amdgpu_passthrough(adev))
>>> +		return false;
>>>
>>>   	if (adev->flags & AMD_IS_APU)
>>>   		return false;
>>> diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
>>> b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
>>> index ce6aeb5..1d9bb29 100644
>>> --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
>>> +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_hwmgr.c
>>> @@ -5311,8 +5311,12 @@ static const struct pp_hwmgr_func
>>> vega10_hwmgr_funcs = {
>>>
>>>   int vega10_hwmgr_init(struct pp_hwmgr *hwmgr)  {
>>> +	struct amdgpu_device *adev = hwmgr->adev;
>>> +
>>>   	hwmgr->hwmgr_func = &vega10_hwmgr_funcs;
>>>   	hwmgr->pptable_func = &vega10_pptable_funcs;
>>> +	if (amdgpu_passthrough(adev))
>>> +		return vega10_baco_set_cap(hwmgr);
>>>
>>>   	return 0;
>>>   }
>>> diff --git
>>> a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
>>> b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
>>> index b6767d7..83d22cd 100644
>>> --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
>>> +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.c
>>> @@ -1371,3 +1371,27 @@ int vega10_get_powerplay_table_entry(struct
>>> pp_hwmgr *hwmgr,
>>>
>>>   	return result;
>>>   }
>>> +
>>> +int vega10_baco_set_cap(struct pp_hwmgr *hwmgr) {
>>> +	int result = 0;
>>> +
>>> +	const ATOM_Vega10_POWERPLAYTABLE *powerplay_table;
>>> +
>>> +	powerplay_table = get_powerplay_table(hwmgr);
>>> +
>>> +	PP_ASSERT_WITH_CODE((powerplay_table != NULL),
>>> +		"Missing PowerPlay Table!", return -1);
>>> +
>>> +	result = check_powerplay_tables(hwmgr, powerplay_table);
>>> +
>>> +	PP_ASSERT_WITH_CODE((result == 0),
>>> +			    "check_powerplay_tables failed", return result);
>>> +
>>> +	set_hw_cap(
>>> +			hwmgr,
>>> +			0 != (le32_to_cpu(powerplay_table->ulPlatformCaps)
>>> & ATOM_VEGA10_PP_PLATFORM_CAP_BACO),
>>> +			PHM_PlatformCaps_BACO);
>>> +	return result;
>>> +}
>>> +
>>> diff --git
>>> a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.h
>>> b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.h
>>> index d83ed2a..da5fbec 100644
>>> --- a/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.h
>>> +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/vega10_processpptables.h
>>> @@ -59,4 +59,5 @@ extern int
>>> vega10_get_number_of_powerplay_table_entries(struct pp_hwmgr
>> *hwmgr);
>>> extern int vega10_get_powerplay_table_entry(struct pp_hwmgr *hwmgr,
>>> uint32_t entry_index,
>>>   		struct pp_power_state *power_state, int
>> (*call_back_func)(struct
>>> pp_hwmgr *, void *,
>>>   				struct pp_power_state *, void *, uint32_t));
>>> +extern int vega10_baco_set_cap(struct pp_hwmgr *hwmgr);
>>>   #endif
>>> --
>>> 2.7.4
>>>
>>> _______________________________________________
>>> amd-gfx mailing list
>>> amd-gfx at lists.freedesktop.org
>>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
>> _______________________________________________
>> amd-gfx mailing list
>> amd-gfx at lists.freedesktop.org
>> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
> 


More information about the amd-gfx mailing list