[PATCH] drm/amdgpu: Move IB pool init and fini.
Andrey Grodzovsky
andrey.grodzovsky at amd.com
Wed Mar 6 21:25:12 UTC 2019
Problem:
Using SDMA for TLB invalidation in certain ASICs exposed a problem
of IB pool not being ready while SDMA already up on Init and already
shutt down while SDMA still running on Fini. This caused
IB allocation failure. Temproary fix was commited into a
bringup branch but this is the generic fix.
Fix:
Init IB pool rigth after GMC is ready but before SDMA is ready.
Do th opposite for Fini.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky at amd.com>
---
drivers/gpu/drm/amd/amdgpu/amdgpu_device.c | 20 +++++++++++---------
1 file changed, 11 insertions(+), 9 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
index 00def57..c05a551 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_device.c
@@ -1686,6 +1686,13 @@ static int amdgpu_device_ip_init(struct amdgpu_device *adev)
}
}
+ r = amdgpu_ib_pool_init(adev);
+ if (r) {
+ dev_err(adev->dev, "IB initialization failed (%d).\n", r);
+ amdgpu_vf_error_put(adev, AMDGIM_ERROR_VF_IB_INIT_FAIL, 0, r);
+ goto init_failed;
+ }
+
r = amdgpu_ucode_create_bo(adev); /* create ucode bo when sw_init complete*/
if (r)
goto init_failed;
@@ -1888,7 +1895,8 @@ static int amdgpu_device_ip_fini(struct amdgpu_device *adev)
for (i = 0; i < adev->num_ip_blocks; i++) {
if (!adev->ip_blocks[i].status.hw)
continue;
- if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SMC) {
+ if (adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SMC ||
+ adev->ip_blocks[i].version->type == AMD_IP_BLOCK_TYPE_SDMA) {
r = adev->ip_blocks[i].version->funcs->hw_fini((void *)adev);
/* XXX handle errors */
if (r) {
@@ -1900,6 +1908,8 @@ static int amdgpu_device_ip_fini(struct amdgpu_device *adev)
}
}
+ amdgpu_ib_pool_fini(adev);
+
for (i = adev->num_ip_blocks - 1; i >= 0; i--) {
if (!adev->ip_blocks[i].status.hw)
continue;
@@ -2651,13 +2661,6 @@ int amdgpu_device_init(struct amdgpu_device *adev,
/* Get a log2 for easy divisions. */
adev->mm_stats.log2_max_MBps = ilog2(max(1u, max_MBps));
- r = amdgpu_ib_pool_init(adev);
- if (r) {
- dev_err(adev->dev, "IB initialization failed (%d).\n", r);
- amdgpu_vf_error_put(adev, AMDGIM_ERROR_VF_IB_INIT_FAIL, 0, r);
- goto failed;
- }
-
amdgpu_fbdev_init(adev);
r = amdgpu_pm_sysfs_init(adev);
@@ -2735,7 +2738,6 @@ void amdgpu_device_fini(struct amdgpu_device *adev)
else
drm_atomic_helper_shutdown(adev->ddev);
}
- amdgpu_ib_pool_fini(adev);
amdgpu_fence_driver_fini(adev);
amdgpu_pm_sysfs_fini(adev);
amdgpu_fbdev_fini(adev);
--
2.7.4
More information about the amd-gfx
mailing list