[PATCH 05/26] drm/amd/display: Fix setting DP_VID_N_MUL
Bhawanpreet Lakha
Bhawanpreet.Lakha at amd.com
Fri Mar 15 15:53:07 UTC 2019
From: Eric Bernstein <eric.bernstein at amd.com>
[Why]
Need to set VID_N_MUL for 4:2:0 cases
[How]
Move setting to enc1_stream_encoder_dp_unblank and
ensure it is also set for non-4:2:0 cases.
Change-Id: If17faba806244d6800ec9ec64990684675f82d0f
Signed-off-by: Eric Bernstein <eric.bernstein at amd.com>
---
.../drm/amd/display/dc/dce110/dce110_hw_sequencer.c | 1 +
.../drm/amd/display/dc/dcn10/dcn10_stream_encoder.c | 13 +++++++++----
.../gpu/drm/amd/display/dc/inc/hw/stream_encoder.h | 1 +
3 files changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
index 89f575f0cd65..7ec9958ddd26 100644
--- a/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_hw_sequencer.c
@@ -1054,6 +1054,7 @@ void dce110_unblank_stream(struct pipe_ctx *pipe_ctx,
/* only 3 items below are used by unblank */
params.pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_100hz / 10;
params.link_settings.link_rate = link_settings->link_rate;
+ params.pixel_encoding = pipe_ctx->stream->timing.pixel_encoding;
if (dc_is_dp_signal(pipe_ctx->stream->signal))
pipe_ctx->stream_res.stream_enc->funcs->dp_unblank(pipe_ctx->stream_res.stream_enc, ¶ms);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
index d370152018f8..d2a15d2e9561 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_stream_encoder.c
@@ -298,7 +298,6 @@ void enc1_stream_encoder_dp_set_stream_attribute(
break;
case PIXEL_ENCODING_YCBCR420:
dp_pixel_encoding = DP_PIXEL_ENCODING_TYPE_YCBCR420;
- REG_UPDATE(DP_VID_TIMING, DP_VID_N_MUL, 1);
break;
default:
dp_pixel_encoding = DP_PIXEL_ENCODING_TYPE_RGB444;
@@ -833,13 +832,17 @@ void enc1_stream_encoder_dp_unblank(
if (param->link_settings.link_rate != LINK_RATE_UNKNOWN) {
uint32_t n_vid = 0x8000;
uint32_t m_vid;
+ uint32_t n_multiply = 0;
+ uint64_t m_vid_l = n_vid;
+
+ /* YCbCr 4:2:0 : Computed VID_M will be 2X the input rate */
+ if (param->pixel_encoding == PIXEL_ENCODING_YCBCR420)
+ n_multiply = 1;
/* M / N = Fstream / Flink
* m_vid / n_vid = pixel rate / link rate
*/
- uint64_t m_vid_l = n_vid;
-
m_vid_l *= param->pixel_clk_khz;
m_vid_l = div_u64(m_vid_l,
param->link_settings.link_rate
@@ -859,7 +862,9 @@ void enc1_stream_encoder_dp_unblank(
REG_UPDATE(DP_VID_M, DP_VID_M, m_vid);
- REG_UPDATE(DP_VID_TIMING, DP_VID_M_N_GEN_EN, 1);
+ REG_UPDATE_2(DP_VID_TIMING,
+ DP_VID_M_N_GEN_EN, 1,
+ DP_VID_N_MUL, n_multiply);
}
/* set DIG_START to 0x1 to resync FIFO */
diff --git a/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h b/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h
index 4051493557bc..8ba73a474014 100644
--- a/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h
+++ b/drivers/gpu/drm/amd/display/dc/inc/hw/stream_encoder.h
@@ -68,6 +68,7 @@ struct encoder_info_frame {
struct encoder_unblank_param {
struct dc_link_settings link_settings;
unsigned int pixel_clk_khz;
+ enum dc_pixel_encoding pixel_encoding;
};
struct encoder_set_dp_phy_pattern_param {
--
2.17.1
More information about the amd-gfx
mailing list