[PATCH 1/2] drm/amd/display: Send vblank and user events at vsartup for DCN

Kazlauskas, Nicholas Nicholas.Kazlauskas at amd.com
Tue Nov 5 16:15:02 UTC 2019


On 2019-11-05 10:34 a.m., sunpeng.li at amd.com wrote:
> From: Leo Li <sunpeng.li at amd.com>
> 
> [Why]
> 
> For DCN hardware, the crtc_high_irq handler is assigned to the vstartup
> interrupt. This is different from DCE, which has it assigned to vblank
> start.
> 
> We'd like to send vblank and user events at vstartup because:
> 
> * It happens close enough to vupdate - the point of no return for HW.
> 
> * It is programmed as lines relative to vblank end - i.e. it is not in
>    the variable portion when VRR is enabled. We should signal user
>    events here.
> 
> * The pflip interrupt responsible for sending user events today only
>    fires if the DCH HUBP component is not clock gated. In situations
>    where planes are disabled - but the CRTC is enabled - user events won't
>    be sent out, leading to flip done timeouts.
> 
> Consequently, this makes vupdate on DCN hardware redundant. It will be
> removed in the next change.
> 
> [How]
> 
> Add a DCN-specific crtc_high_irq handler, and hook it to the VStartup
> signal. Inside the DCN handler, we send off user events if the pflip
> handler hasn't already done so.
> 
> Signed-off-by: Leo Li <sunpeng.li at amd.com>
> ---
>   .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 65 ++++++++++++++++++-
>   1 file changed, 64 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 00017b91c91a..256a23a0ec28 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -485,6 +485,69 @@ static void dm_crtc_high_irq(void *interrupt_params)
>   	}
>   }
> 
> +
> +/**
> + * dm_dcn_crtc_high_irq() - Handles VStartup interrupt for DCN generation ASICs
> + * @interrupt params - interrupt parameters
> + *
> + * Notify DRM's vblank event handler at VSTARTUP
> + *
> + * Unlike DCE hardware, we trigger the handler at VSTARTUP. at which:
> + * * We are close enough to VUPDATE - the point of no return for hw
> + * * We are in the fixed portion of variable front porch when vrr is enabled
> + * * We are before VUPDATE, where double-buffered vrr registers are swapped
> + *
> + * It is therefore the correct place to signal vblank, send user flip events,
> + * and update VRR.
> + */
> +static void dm_dcn_crtc_high_irq(void *interrupt_params)
> +{
> +	struct common_irq_params *irq_params = interrupt_params;
> +	struct amdgpu_device *adev = irq_params->adev;
> +	struct amdgpu_crtc *acrtc;
> +	struct dm_crtc_state *acrtc_state;
> +	unsigned long flags;
> +
> +	acrtc = get_crtc_by_otg_inst(adev, irq_params->irq_src - IRQ_TYPE_VBLANK);
> +
> +	if (!acrtc)
> +		return;
> +
> +	acrtc_state = to_dm_crtc_state(acrtc->base.state);
> +
> +	DRM_DEBUG_DRIVER("crtc:%d, vupdate-vrr:%d\n", acrtc->crtc_id,
> +				amdgpu_dm_vrr_active(acrtc_state));
> +
> +	amdgpu_dm_crtc_handle_crc_irq(&acrtc->base);
> +	drm_crtc_handle_vblank(&acrtc->base);

Shouldn't this be the other way around? Don't we want the CRC sent back 
to userspace to have the updated vblank counter?

This is how it worked before at least.

Other than that, this patch looks fine to me.

Nicholas Kazlauskas

> +
> +	spin_lock_irqsave(&adev->ddev->event_lock, flags);
> +
> +	if (acrtc_state->vrr_params.supported &&
> +	    acrtc_state->freesync_config.state == VRR_STATE_ACTIVE_VARIABLE) {
> +		mod_freesync_handle_v_update(
> +		adev->dm.freesync_module,
> +		acrtc_state->stream,
> +		&acrtc_state->vrr_params);
> +
> +		dc_stream_adjust_vmin_vmax(
> +			adev->dm.dc,
> +			acrtc_state->stream,
> +			&acrtc_state->vrr_params.adjust);
> +	}
> +
> +	if (acrtc->pflip_status == AMDGPU_FLIP_SUBMITTED) {
> +		if (acrtc->event) {
> +			drm_crtc_send_vblank_event(&acrtc->base, acrtc->event);
> +			acrtc->event = NULL;
> +			drm_crtc_vblank_put(&acrtc->base);
> +		}
> +		acrtc->pflip_status = AMDGPU_FLIP_NONE;
> +	}
> +
> +	spin_unlock_irqrestore(&adev->ddev->event_lock, flags);
> +}
> +
>   static int dm_set_clockgating_state(void *handle,
>   		  enum amd_clockgating_state state)
>   {
> @@ -2175,7 +2238,7 @@ static int dcn10_register_irq_handlers(struct amdgpu_device *adev)
>   		c_irq_params->irq_src = int_params.irq_source;
> 
>   		amdgpu_dm_irq_register_interrupt(adev, &int_params,
> -				dm_crtc_high_irq, c_irq_params);
> +				dm_dcn_crtc_high_irq, c_irq_params);
>   	}
> 
>   	/* Use VUPDATE_NO_LOCK interrupt on DCN, which seems to correspond to
> --
> 2.23.0
> 



More information about the amd-gfx mailing list