[PATCH 2/2 v2] drm/amd/display: Disable VUpdate interrupt for DCN hardware

[Kazlauskas, Nicholas]

On 2019-11-05 10:58 a.m., sunpeng.li at amd.com wrote:
> From: Leo Li <sunpeng.li at amd.com>
> 
> [Why]
> 
> On DCN hardware, the crtc_high_irq handler makes vupdate_high_irq
> handler redundant.
> 
> All the vupdate handler does is handle vblank events, and update vrr
> for DCE hw (excluding VEGA, more on that later). As far as usermode is
> concerned. vstartup happens close enough to vupdate on DCN that it can
> be considered the "same". Handling vblank and updating vrr at vstartup
> effectively replaces vupdate on DCN.
> 
> Vega is a bit special. Like DCN, the VRR registers on Vega are
> double-buffered, and swapped at vupdate. But Unlike DCN, it lacks a
> vstartup interrupt. This means we can't quite remove the vupdate handler
> for it, since delayerd user events due to vrr are sent off there.
> 
> [How]
> 
> Remove registration of VUpdate interrupt handler for DCN. Disable
> vupdate interrupt if asic family DCN, enable otherwise.
> 
> Signed-off-by: Leo Li <sunpeng.li at amd.com>
> ---
> 
> v2: Don't exclude vega when enabling vupdate interrupts
> 
>   .../gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 34 +++----------------
>   1 file changed, 4 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> index 256a23a0ec28..3664af3b41a1 100644
> --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
> @@ -2241,34 +2241,6 @@ static int dcn10_register_irq_handlers(struct amdgpu_device *adev)
>   				dm_dcn_crtc_high_irq, c_irq_params);
>   	}
> 
> -	/* Use VUPDATE_NO_LOCK interrupt on DCN, which seems to correspond to
> -	 * the regular VUPDATE interrupt on DCE. We want DC_IRQ_SOURCE_VUPDATEx
> -	 * to trigger at end of each vblank, regardless of state of the lock,
> -	 * matching DCE behaviour.
> -	 */
> -	for (i = DCN_1_0__SRCID__OTG0_IHC_V_UPDATE_NO_LOCK_INTERRUPT;
> -	     i <= DCN_1_0__SRCID__OTG0_IHC_V_UPDATE_NO_LOCK_INTERRUPT + adev->mode_info.num_crtc - 1;
> -	     i++) {
> -		r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->vupdate_irq);
> -
> -		if (r) {
> -			DRM_ERROR("Failed to add vupdate irq id!\n");
> -			return r;
> -		}
> -
> -		int_params.int_context = INTERRUPT_HIGH_IRQ_CONTEXT;
> -		int_params.irq_source =
> -			dc_interrupt_to_irq_source(dc, i, 0);
> -
> -		c_irq_params = &adev->dm.vupdate_params[int_params.irq_source - DC_IRQ_SOURCE_VUPDATE1];
> -
> -		c_irq_params->adev = adev;
> -		c_irq_params->irq_src = int_params.irq_source;
> -
> -		amdgpu_dm_irq_register_interrupt(adev, &int_params,
> -				dm_vupdate_high_irq, c_irq_params);
> -	}
> -
>   	/* Use GRPH_PFLIP interrupt */
>   	for (i = DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT;
>   			i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + adev->mode_info.num_crtc - 1;
> @@ -4266,7 +4238,7 @@ static inline int dm_set_vblank(struct drm_crtc *crtc, bool enable)
>   	struct dm_crtc_state *acrtc_state = to_dm_crtc_state(crtc->state);
>   	int rc = 0;
> 
> -	if (enable) {
> +	if (enable && adev->family <= AMDGPU_FAMILY_AI) {
>   		/* vblank irq on -> Only need vupdate irq in vrr mode */
>   		if (amdgpu_dm_vrr_active(acrtc_state))
>   			rc = dm_set_vupdate_irq(crtc, true);
> @@ -6243,6 +6215,7 @@ static void pre_update_freesync_state_on_stream(
>   static void amdgpu_dm_handle_vrr_transition(struct dm_crtc_state *old_state,
>   					    struct dm_crtc_state *new_state)
>   {
> +	struct amdgpu_device *adev = old_state->base.crtc->dev->dev_private;
>   	bool old_vrr_active = amdgpu_dm_vrr_active(old_state);
>   	bool new_vrr_active = amdgpu_dm_vrr_active(new_state);
> 
> @@ -6255,7 +6228,8 @@ static void amdgpu_dm_handle_vrr_transition(struct dm_crtc_state *old_state,
>   		 * We also need vupdate irq for the actual core vblank handling
>   		 * at end of vblank.
>   		 */
> -		dm_set_vupdate_irq(new_state->base.crtc, true);
> +		if (adev->family <= AMDGPU_FAMILY_AI)
> +			dm_set_vupdate_irq(new_state->base.crtc, true);

Can we move the if into dm_set_vupdate_irq directly? We're setting it to 
false even when we don't have it with this patch.

Nicholas Kazlauskas

>   		drm_crtc_vblank_get(new_state->base.crtc);
>   		DRM_DEBUG_DRIVER("%s: crtc=%u VRR off->on: Get vblank ref\n",
>   				 __func__, new_state->base.crtc->base.id);
> --
> 2.23.0
>