[PATCH 12/14] drm/amd/display: use drm defines for MAX CASCADE MASK

[Bhawanpreet Lakha]

[Why]
drm already has this define

[How]
drm Mask is 0x08 vs 0x0800. The reason is because drm mask
works on a byte.        ^^
                 =======||
                 ||
Since the first byte is always zero we can ignore it and only check the
second byte.

Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha at amd.com>
---
 drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h    |  4 ----
 .../drm/amd/display/modules/hdcp/hdcp1_execution.c | 14 ++++++--------
 2 files changed, 6 insertions(+), 12 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
index bfb32afc1868..f6bba487d1d4 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp.h
@@ -35,8 +35,6 @@
 /* TODO:
  * Replace below defines with these
  *
- * #define DRM_HDCP_MAX_CASCADE_EXCEEDED(x)        (x & BIT(3))
- * #define DRM_HDCP_MAX_CASCADE_EXCEEDED(x)        (x & BIT(3))
  * #define HDCP_2_2_HDMI_RXSTATUS_MSG_SZ_HI(x)     ((x) & 0x3)
  * #define HDCP_2_2_HDMI_RXSTATUS_READY(x)         ((x) & BIT(2))
  * #define HDCP_2_2_HDMI_RXSTATUS_REAUTH_REQ(x)    ((x) & BIT(3))
@@ -46,8 +44,6 @@
  * split the HDMI rxstatus into 2bytes before we can use usptream defs
  */
 
-#define BSTATUS_MAX_CASCADE_EXCEEDED_MASK		0x0800
-#define BINFO_MAX_CASCADE_EXCEEDED_MASK_DP		0x0800
 #define RXSTATUS_MSG_SIZE_MASK				0x03FF
 #define RXSTATUS_READY_MASK				0x0400
 #define RXSTATUS_REAUTH_REQUEST_MASK			0x0800
diff --git a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
index 4618abd6504f..4d11041a8c6f 100644
--- a/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
+++ b/drivers/gpu/drm/amd/display/modules/hdcp/hdcp1_execution.c
@@ -92,15 +92,13 @@ static inline enum mod_hdcp_status check_no_max_cascade(struct mod_hdcp *hdcp)
 	enum mod_hdcp_status status;
 
 	if (is_dp_hdcp(hdcp))
-		status = (hdcp->auth.msg.hdcp1.binfo_dp &
-				BINFO_MAX_CASCADE_EXCEEDED_MASK_DP) ?
-			MOD_HDCP_STATUS_HDCP1_MAX_CASCADE_EXCEEDED_FAILURE :
-			MOD_HDCP_STATUS_SUCCESS;
+		status = DRM_HDCP_MAX_CASCADE_EXCEEDED(hdcp->auth.msg.hdcp1.binfo_dp >> 8)
+				 ? MOD_HDCP_STATUS_HDCP1_MAX_CASCADE_EXCEEDED_FAILURE
+				 : MOD_HDCP_STATUS_SUCCESS;
 	else
-		status = (hdcp->auth.msg.hdcp1.bstatus &
-				BSTATUS_MAX_CASCADE_EXCEEDED_MASK) ?
-				MOD_HDCP_STATUS_HDCP1_MAX_CASCADE_EXCEEDED_FAILURE :
-				MOD_HDCP_STATUS_SUCCESS;
+		status = DRM_HDCP_MAX_CASCADE_EXCEEDED(hdcp->auth.msg.hdcp1.bstatus >> 8)
+				 ? MOD_HDCP_STATUS_HDCP1_MAX_CASCADE_EXCEEDED_FAILURE
+				 : MOD_HDCP_STATUS_SUCCESS;
 	return status;
 }
 
-- 
2.17.1