[PATCH v2 07/27] drm/dp_mst: Add sideband down request tracing + selftests

Jani Nikula jani.nikula at linux.intel.com
Tue Sep 10 09:01:14 UTC 2019


On Tue, 03 Sep 2019, Lyude Paul <lyude at redhat.com> wrote:
> Unfortunately the DP MST helpers do not have much in the way of
> debugging utilities. So, let's add some!
>
> This adds basic debugging output for down sideband requests that we send
> from the driver, so that we can actually discern what's happening when
> sideband requests timeout.
>
> Since there wasn't really a good way of testing that any of this worked,
> I ended up writing simple selftests that lightly test sideband message
> encoding and decoding as well. Enjoy!
>
> Changes since v1:
> * Clean up DO_TEST() and sideband_msg_req_encode_decode() - danvet
> * Get rid of pr_fmt(), just define a prefix string instead and use
>   drm_printf()
> * Check highest bit of VCPI in drm_dp_decode_sideband_req() - danvet
> * Make the switch case order between drm_dp_decode_sideband_req() and
>   drm_dp_encode_sideband_req() the same - danvet
> * Only check DRM_UT_DP - danvet
> * Clean up sideband_msg_req_equal() from selftests a bit, and add
>   comments explaining why we can't just use memcmp - danvet
>
> Cc: Juston Li <juston.li at intel.com>
> Cc: Imre Deak <imre.deak at intel.com>
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Harry Wentland <hwentlan at amd.com>
> Reviewed-by: Daniel Vetter <daniel.vetter at ffwll.ch>
> Signed-off-by: Lyude Paul <lyude at redhat.com>
> ---
>  drivers/gpu/drm/drm_dp_mst_topology.c         | 309 +++++++++++++++++-
>  .../gpu/drm/drm_dp_mst_topology_internal.h    |  24 ++
>  .../gpu/drm/selftests/drm_modeset_selftests.h |   1 +
>  .../drm/selftests/test-drm_dp_mst_helper.c    | 204 ++++++++++++
>  .../drm/selftests/test-drm_modeset_common.h   |   1 +
>  include/drm/drm_dp_mst_helper.h               |   2 +-
>  6 files changed, 536 insertions(+), 5 deletions(-)
>  create mode 100644 drivers/gpu/drm/drm_dp_mst_topology_internal.h
>
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 1c862749cb63..f5f1d8b50fb6 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -37,6 +37,7 @@
>  #include <drm/drm_probe_helper.h>
>  
>  #include "drm_crtc_helper_internal.h"
> +#include "drm_dp_mst_topology_internal.h"
>  
>  /**
>   * DOC: dp mst helper
> @@ -73,6 +74,8 @@ static int drm_dp_mst_register_i2c_bus(struct drm_dp_aux *aux);
>  static void drm_dp_mst_unregister_i2c_bus(struct drm_dp_aux *aux);
>  static void drm_dp_mst_kick_tx(struct drm_dp_mst_topology_mgr *mgr);
>  
> +#define DBG_PREFIX "[dp_mst]"
> +
>  #define DP_STR(x) [DP_ ## x] = #x
>  
>  static const char *drm_dp_mst_req_type_str(u8 req_type)
> @@ -129,6 +132,43 @@ static const char *drm_dp_mst_nak_reason_str(u8 nak_reason)
>  }
>  
>  #undef DP_STR
> +#define DP_STR(x) [DRM_DP_SIDEBAND_TX_ ## x] = #x
> +
> +static const char *drm_dp_mst_sideband_tx_state_str(int state)
> +{
> +	static const char * const sideband_reason_str[] = {
> +		DP_STR(QUEUED),
> +		DP_STR(START_SEND),
> +		DP_STR(SENT),
> +		DP_STR(RX),
> +		DP_STR(TIMEOUT),
> +	};
> +
> +	if (state >= ARRAY_SIZE(sideband_reason_str) ||
> +	    !sideband_reason_str[state])
> +		return "unknown";
> +
> +	return sideband_reason_str[state];
> +}
> +
> +static int
> +drm_dp_mst_rad_to_str(const u8 rad[8], u8 lct, char *out, size_t len)
> +{
> +	int i;
> +	u8 unpacked_rad[16];
> +
> +	for (i = 0; i < lct; i++) {
> +		if (i % 2)
> +			unpacked_rad[i] = rad[i / 2] >> 4;
> +		else
> +			unpacked_rad[i] = rad[i / 2] & BIT_MASK(4);
> +	}
> +
> +	/* TODO: Eventually add something to printk so we can format the rad
> +	 * like this: 1.2.3
> +	 */
> +	return snprintf(out, len, "%*phC", lct, unpacked_rad);
> +}
>  
>  /* sideband msg handling */
>  static u8 drm_dp_msg_header_crc4(const uint8_t *data, size_t num_nibbles)
> @@ -261,8 +301,9 @@ static bool drm_dp_decode_sideband_msg_hdr(struct drm_dp_sideband_msg_hdr *hdr,
>  	return true;
>  }
>  
> -static void drm_dp_encode_sideband_req(struct drm_dp_sideband_msg_req_body *req,
> -				       struct drm_dp_sideband_msg_tx *raw)
> +void
> +drm_dp_encode_sideband_req(const struct drm_dp_sideband_msg_req_body *req,
> +			   struct drm_dp_sideband_msg_tx *raw)
>  {
>  	int idx = 0;
>  	int i;
> @@ -363,6 +404,251 @@ static void drm_dp_encode_sideband_req(struct drm_dp_sideband_msg_req_body *req,
>  	}
>  	raw->cur_len = idx;
>  }
> +EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_encode_sideband_req);
> +
> +/* Decode a sideband request we've encoded, mainly used for debugging */
> +int
> +drm_dp_decode_sideband_req(const struct drm_dp_sideband_msg_tx *raw,
> +			   struct drm_dp_sideband_msg_req_body *req)
> +{
> +	const u8 *buf = raw->msg;
> +	int i, idx = 0;
> +
> +	req->req_type = buf[idx++] & 0x7f;
> +	switch (req->req_type) {
> +	case DP_ENUM_PATH_RESOURCES:
> +	case DP_POWER_DOWN_PHY:
> +	case DP_POWER_UP_PHY:
> +		req->u.port_num.port_number = (buf[idx] >> 4) & 0xf;
> +		break;
> +	case DP_ALLOCATE_PAYLOAD:
> +		{
> +			struct drm_dp_allocate_payload *a =
> +				&req->u.allocate_payload;
> +
> +			a->number_sdp_streams = buf[idx] & 0xf;
> +			a->port_number = (buf[idx] >> 4) & 0xf;
> +
> +			WARN_ON(buf[++idx] & 0x80);
> +			a->vcpi = buf[idx] & 0x7f;
> +
> +			a->pbn = buf[++idx] << 8;
> +			a->pbn |= buf[++idx];
> +
> +			idx++;
> +			for (i = 0; i < a->number_sdp_streams; i++) {
> +				a->sdp_stream_sink[i] =
> +					(buf[idx + (i / 2)] >> ((i % 2) ? 0 : 4)) & 0xf;
> +			}
> +		}
> +		break;
> +	case DP_QUERY_PAYLOAD:
> +		req->u.query_payload.port_number = (buf[idx] >> 4) & 0xf;
> +		WARN_ON(buf[++idx] & 0x80);
> +		req->u.query_payload.vcpi = buf[idx] & 0x7f;
> +		break;
> +	case DP_REMOTE_DPCD_READ:
> +		{
> +			struct drm_dp_remote_dpcd_read *r = &req->u.dpcd_read;
> +
> +			r->port_number = (buf[idx] >> 4) & 0xf;
> +
> +			r->dpcd_address = (buf[idx] << 16) & 0xf0000;
> +			r->dpcd_address |= (buf[++idx] << 8) & 0xff00;
> +			r->dpcd_address |= buf[++idx] & 0xff;
> +
> +			r->num_bytes = buf[++idx];
> +		}
> +		break;
> +	case DP_REMOTE_DPCD_WRITE:
> +		{
> +			struct drm_dp_remote_dpcd_write *w =
> +				&req->u.dpcd_write;
> +
> +			w->port_number = (buf[idx] >> 4) & 0xf;
> +
> +			w->dpcd_address = (buf[idx] << 16) & 0xf0000;
> +			w->dpcd_address |= (buf[++idx] << 8) & 0xff00;
> +			w->dpcd_address |= buf[++idx] & 0xff;
> +
> +			w->num_bytes = buf[++idx];
> +
> +			w->bytes = kmemdup(&buf[++idx], w->num_bytes,
> +					   GFP_KERNEL);
> +			if (!w->bytes)
> +				return -ENOMEM;
> +		}
> +		break;
> +	case DP_REMOTE_I2C_READ:
> +		{
> +			struct drm_dp_remote_i2c_read *r = &req->u.i2c_read;
> +			struct drm_dp_remote_i2c_read_tx *tx;
> +			bool failed = false;
> +
> +			r->num_transactions = buf[idx] & 0x3;
> +			r->port_number = (buf[idx] >> 4) & 0xf;
> +			for (i = 0; i < r->num_transactions; i++) {
> +				tx = &r->transactions[i];
> +
> +				tx->i2c_dev_id = buf[++idx] & 0x7f;
> +				tx->num_bytes = buf[++idx];
> +				tx->bytes = kmemdup(&buf[++idx],
> +						    tx->num_bytes,
> +						    GFP_KERNEL);
> +				if (!tx->bytes) {
> +					failed = true;
> +					break;
> +				}
> +				idx += tx->num_bytes;
> +				tx->no_stop_bit = (buf[idx] >> 5) & 0x1;
> +				tx->i2c_transaction_delay = buf[idx] & 0xf;
> +			}
> +
> +			if (failed) {
> +				for (i = 0; i < r->num_transactions; i++)
> +					kfree(tx->bytes);
> +				return -ENOMEM;
> +			}
> +
> +			r->read_i2c_device_id = buf[++idx] & 0x7f;
> +			r->num_bytes_read = buf[++idx];
> +		}
> +		break;
> +	case DP_REMOTE_I2C_WRITE:
> +		{
> +			struct drm_dp_remote_i2c_write *w = &req->u.i2c_write;
> +
> +			w->port_number = (buf[idx] >> 4) & 0xf;
> +			w->write_i2c_device_id = buf[++idx] & 0x7f;
> +			w->num_bytes = buf[++idx];
> +			w->bytes = kmemdup(&buf[++idx], w->num_bytes,
> +					   GFP_KERNEL);
> +			if (!w->bytes)
> +				return -ENOMEM;
> +		}
> +		break;
> +	}
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_decode_sideband_req);
> +
> +void
> +drm_dp_dump_sideband_msg_req_body(const struct drm_dp_sideband_msg_req_body *req,
> +				  int indent, struct drm_printer *printer)
> +{
> +	int i;
> +
> +#define P(f, ...) drm_printf_indent(printer, indent, f, ##__VA_ARGS__)
> +	if (req->req_type == DP_LINK_ADDRESS) {
> +		/* No contents to print */
> +		P("type=%s\n", drm_dp_mst_req_type_str(req->req_type));
> +		return;
> +	}
> +
> +	P("type=%s contents:\n", drm_dp_mst_req_type_str(req->req_type));
> +	indent++;
> +
> +	switch (req->req_type) {
> +	case DP_ENUM_PATH_RESOURCES:
> +	case DP_POWER_DOWN_PHY:
> +	case DP_POWER_UP_PHY:
> +		P("port=%d\n", req->u.port_num.port_number);
> +		break;
> +	case DP_ALLOCATE_PAYLOAD:
> +		P("port=%d vcpi=%d pbn=%d sdp_streams=%d %*ph\n",
> +		  req->u.allocate_payload.port_number,
> +		  req->u.allocate_payload.vcpi, req->u.allocate_payload.pbn,
> +		  req->u.allocate_payload.number_sdp_streams,
> +		  req->u.allocate_payload.number_sdp_streams,
> +		  req->u.allocate_payload.sdp_stream_sink);
> +		break;
> +	case DP_QUERY_PAYLOAD:
> +		P("port=%d vcpi=%d\n",
> +		  req->u.query_payload.port_number,
> +		  req->u.query_payload.vcpi);
> +		break;
> +	case DP_REMOTE_DPCD_READ:
> +		P("port=%d dpcd_addr=%05x len=%d\n",
> +		  req->u.dpcd_read.port_number, req->u.dpcd_read.dpcd_address,
> +		  req->u.dpcd_read.num_bytes);
> +		break;
> +	case DP_REMOTE_DPCD_WRITE:
> +		P("port=%d addr=%05x len=%d: %*ph\n",
> +		  req->u.dpcd_write.port_number,
> +		  req->u.dpcd_write.dpcd_address,
> +		  req->u.dpcd_write.num_bytes, req->u.dpcd_write.num_bytes,
> +		  req->u.dpcd_write.bytes);
> +		break;
> +	case DP_REMOTE_I2C_READ:
> +		P("port=%d num_tx=%d id=%d size=%d:\n",
> +		  req->u.i2c_read.port_number,
> +		  req->u.i2c_read.num_transactions,
> +		  req->u.i2c_read.read_i2c_device_id,
> +		  req->u.i2c_read.num_bytes_read);
> +
> +		indent++;
> +		for (i = 0; i < req->u.i2c_read.num_transactions; i++) {
> +			const struct drm_dp_remote_i2c_read_tx *rtx =
> +				&req->u.i2c_read.transactions[i];
> +
> +			P("%d: id=%03d size=%03d no_stop_bit=%d tx_delay=%03d: %*ph\n",
> +			  i, rtx->i2c_dev_id, rtx->num_bytes,
> +			  rtx->no_stop_bit, rtx->i2c_transaction_delay,
> +			  rtx->num_bytes, rtx->bytes);
> +		}
> +		break;
> +	case DP_REMOTE_I2C_WRITE:
> +		P("port=%d id=%d size=%d: %*ph\n",
> +		  req->u.i2c_write.port_number,
> +		  req->u.i2c_write.write_i2c_device_id,
> +		  req->u.i2c_write.num_bytes, req->u.i2c_write.num_bytes,
> +		  req->u.i2c_write.bytes);
> +		break;
> +	default:
> +		P("???\n");
> +		break;
> +	}
> +#undef P
> +}
> +EXPORT_SYMBOL_FOR_TESTS_ONLY(drm_dp_dump_sideband_msg_req_body);
> +
> +static inline void
> +drm_dp_mst_dump_sideband_msg_tx(struct drm_printer *p,
> +				const struct drm_dp_sideband_msg_tx *txmsg)
> +{
> +	struct drm_dp_sideband_msg_req_body req;
> +	char buf[64];
> +	int ret;
> +	int i;
> +
> +	drm_dp_mst_rad_to_str(txmsg->dst->rad, txmsg->dst->lct, buf,
> +			      sizeof(buf));
> +	drm_printf(p, "txmsg cur_offset=%x cur_len=%x seqno=%x state=%s path_msg=%d dst=%s\n",
> +		   txmsg->cur_offset, txmsg->cur_len, txmsg->seqno,
> +		   drm_dp_mst_sideband_tx_state_str(txmsg->state),
> +		   txmsg->path_msg, buf);
> +
> +	ret = drm_dp_decode_sideband_req(txmsg, &req);
> +	if (ret) {
> +		drm_printf(p, "<failed to decode sideband req: %d>\n", ret);
> +		return;
> +	}
> +	drm_dp_dump_sideband_msg_req_body(&req, 1, p);
> +
> +	switch (req.req_type) {
> +	case DP_REMOTE_DPCD_WRITE:
> +		kfree(req.u.dpcd_write.bytes);
> +		break;
> +	case DP_REMOTE_I2C_READ:
> +		for (i = 0; i < req.u.i2c_read.num_transactions; i++)
> +			kfree(req.u.i2c_read.transactions[i].bytes);
> +		break;
> +	case DP_REMOTE_I2C_WRITE:
> +		kfree(req.u.i2c_write.bytes);
> +		break;
> +	}
> +}
>  
>  static void drm_dp_crc_sideband_chunk_req(u8 *msg, u8 len)
>  {
> @@ -894,6 +1180,11 @@ static int drm_dp_mst_wait_tx_reply(struct drm_dp_mst_branch *mstb,
>  		}
>  	}
>  out:
> +	if (unlikely(ret == -EIO && drm_debug & DRM_UT_DP)) {
> +		struct drm_printer p = drm_debug_printer(DBG_PREFIX);
> +
> +		drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
> +	}
>  	mutex_unlock(&mgr->qlock);
>  
>  	return ret;
> @@ -2013,8 +2304,11 @@ static int process_single_tx_qlock(struct drm_dp_mst_topology_mgr *mgr,
>  	idx += tosend + 1;
>  
>  	ret = drm_dp_send_sideband_msg(mgr, up, chunk, idx);
> -	if (ret) {
> -		DRM_DEBUG_KMS("sideband msg failed to send\n");
> +	if (unlikely(ret && drm_debug & DRM_UT_DP)) {
> +		struct drm_printer p = drm_debug_printer(DBG_PREFIX);
> +
> +		drm_printf(&p, "sideband msg failed to send\n");
> +		drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
>  		return ret;
>  	}
>  
> @@ -2076,6 +2370,13 @@ static void drm_dp_queue_down_tx(struct drm_dp_mst_topology_mgr *mgr,
>  {
>  	mutex_lock(&mgr->qlock);
>  	list_add_tail(&txmsg->next, &mgr->tx_msg_downq);
> +
> +	if (unlikely(drm_debug & DRM_UT_DP)) {
> +		struct drm_printer p = drm_debug_printer(DBG_PREFIX);
> +
> +		drm_dp_mst_dump_sideband_msg_tx(&p, txmsg);
> +	}
> +
>  	if (list_is_singular(&mgr->tx_msg_downq))
>  		process_single_down_tx_qlock(mgr);
>  	mutex_unlock(&mgr->qlock);
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology_internal.h b/drivers/gpu/drm/drm_dp_mst_topology_internal.h
> new file mode 100644
> index 000000000000..eeda9a61c657
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_dp_mst_topology_internal.h
> @@ -0,0 +1,24 @@
> +/* SPDX-License-Identifier: GPL-2.0-only
> + *
> + * Declarations for DP MST related functions which are only used in selftests
> + *
> + * Copyright © 2018 Red Hat
> + * Authors:
> + *     Lyude Paul <lyude at redhat.com>
> + */
> +
> +#ifndef _DRM_DP_MST_HELPER_INTERNAL_H_
> +#define _DRM_DP_MST_HELPER_INTERNAL_H_
> +
> +#include <drm/drm_dp_mst_helper.h>
> +
> +void
> +drm_dp_encode_sideband_req(const struct drm_dp_sideband_msg_req_body *req,
> +			   struct drm_dp_sideband_msg_tx *raw);
> +int drm_dp_decode_sideband_req(const struct drm_dp_sideband_msg_tx *raw,
> +			       struct drm_dp_sideband_msg_req_body *req);
> +void
> +drm_dp_dump_sideband_msg_req_body(const struct drm_dp_sideband_msg_req_body *req,
> +				  int indent, struct drm_printer *printer);
> +
> +#endif /* !_DRM_DP_MST_HELPER_INTERNAL_H_ */
> diff --git a/drivers/gpu/drm/selftests/drm_modeset_selftests.h b/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> index dec3ee3ec96f..1898de0b4a4d 100644
> --- a/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> +++ b/drivers/gpu/drm/selftests/drm_modeset_selftests.h
> @@ -33,3 +33,4 @@ selftest(damage_iter_damage_one_outside, igt_damage_iter_damage_one_outside)
>  selftest(damage_iter_damage_src_moved, igt_damage_iter_damage_src_moved)
>  selftest(damage_iter_damage_not_visible, igt_damage_iter_damage_not_visible)
>  selftest(dp_mst_calc_pbn_mode, igt_dp_mst_calc_pbn_mode)
> +selftest(dp_mst_sideband_msg_req_decode, igt_dp_mst_sideband_msg_req_decode)
> diff --git a/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c b/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> index 9baa5171988d..af2b2de65316 100644
> --- a/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> +++ b/drivers/gpu/drm/selftests/test-drm_dp_mst_helper.c
> @@ -3,9 +3,12 @@
>   * Test cases for for the DRM DP MST helpers
>   */
>  
> +#define PREFIX_STR "[drm_dp_mst_helper]"
> +
>  #include <drm/drm_dp_mst_helper.h>
>  #include <drm/drm_print.h>
>  
> +#include "../drm_dp_mst_topology_internal.h"
>  #include "test-drm_modeset_common.h"
>  
>  int igt_dp_mst_calc_pbn_mode(void *ignored)
> @@ -32,3 +35,204 @@ int igt_dp_mst_calc_pbn_mode(void *ignored)
>  
>  	return 0;
>  }
> +
> +static bool
> +sideband_msg_req_equal(const struct drm_dp_sideband_msg_req_body *in,
> +		       const struct drm_dp_sideband_msg_req_body *out)
> +{
> +	const struct drm_dp_remote_i2c_read_tx *txin, *txout;
> +	int i;
> +
> +	if (in->req_type != out->req_type)
> +		return false;
> +
> +	switch (in->req_type) {
> +	/*
> +	 * Compare struct members manually for request types which can't be
> +	 * compared simply using memcmp(). This is because said request types
> +	 * contain pointers to other allocated structs
> +	 */
> +	case DP_REMOTE_I2C_READ:
> +#define IN in->u.i2c_read
> +#define OUT out->u.i2c_read
> +		if (IN.num_bytes_read != OUT.num_bytes_read ||
> +		    IN.num_transactions != OUT.num_transactions ||
> +		    IN.port_number != OUT.port_number ||
> +		    IN.read_i2c_device_id != OUT.read_i2c_device_id)
> +			return false;
> +
> +		for (i = 0; i < IN.num_transactions; i++) {
> +			txin = &IN.transactions[i];
> +			txout = &OUT.transactions[i];
> +
> +			if (txin->i2c_dev_id != txout->i2c_dev_id ||
> +			    txin->no_stop_bit != txout->no_stop_bit ||
> +			    txin->num_bytes != txout->num_bytes ||
> +			    txin->i2c_transaction_delay !=
> +			    txout->i2c_transaction_delay)
> +				return false;
> +
> +			if (memcmp(txin->bytes, txout->bytes,
> +				   txin->num_bytes) != 0)
> +				return false;
> +		}
> +		break;
> +#undef IN
> +#undef OUT
> +
> +	case DP_REMOTE_DPCD_WRITE:
> +#define IN in->u.dpcd_write
> +#define OUT out->u.dpcd_write
> +		if (IN.dpcd_address != OUT.dpcd_address ||
> +		    IN.num_bytes != OUT.num_bytes ||
> +		    IN.port_number != OUT.port_number)
> +			return false;
> +
> +		return memcmp(IN.bytes, OUT.bytes, IN.num_bytes) == 0;
> +#undef IN
> +#undef OUT
> +
> +	case DP_REMOTE_I2C_WRITE:
> +#define IN in->u.i2c_write
> +#define OUT out->u.i2c_write
> +		if (IN.port_number != OUT.port_number ||
> +		    IN.write_i2c_device_id != OUT.write_i2c_device_id ||
> +		    IN.num_bytes != OUT.num_bytes)
> +			return false;
> +
> +		return memcmp(IN.bytes, OUT.bytes, IN.num_bytes) == 0;
> +#undef IN
> +#undef OUT
> +
> +	default:
> +		return memcmp(in, out, sizeof(*in)) == 0;
> +	}
> +
> +	return true;
> +}
> +
> +static bool
> +sideband_msg_req_encode_decode(struct drm_dp_sideband_msg_req_body *in)
> +{
> +	struct drm_dp_sideband_msg_req_body out = {0};
> +	struct drm_printer p = drm_err_printer(PREFIX_STR);
> +	struct drm_dp_sideband_msg_tx txmsg;
> +	int i, ret;
> +
> +	drm_dp_encode_sideband_req(in, &txmsg);
> +	ret = drm_dp_decode_sideband_req(&txmsg, &out);
> +	if (ret < 0) {
> +		drm_printf(&p, "Failed to decode sideband request: %d\n",
> +			   ret);

Is this the sole reason of adding drm_err_printer()? Where do you intend
to take error printing next, in general? Why isn't DRM_ERROR() the right
thing to do here?

It's just that I think debug and error printing from drm is a mess, and
instead of cleaning it up, we seem to be piling on new stuff without
direction.

BR,
Jani.



> +		return false;
> +	}
> +
> +	if (!sideband_msg_req_equal(in, &out)) {
> +		drm_printf(&p, "Encode/decode failed, expected:\n");
> +		drm_dp_dump_sideband_msg_req_body(in, 1, &p);
> +		drm_printf(&p, "Got:\n");
> +		drm_dp_dump_sideband_msg_req_body(&out, 1, &p);
> +		return false;
> +	}
> +
> +	switch (in->req_type) {
> +	case DP_REMOTE_DPCD_WRITE:
> +		kfree(out.u.dpcd_write.bytes);
> +		break;
> +	case DP_REMOTE_I2C_READ:
> +		for (i = 0; i < out.u.i2c_read.num_transactions; i++)
> +			kfree(out.u.i2c_read.transactions[i].bytes);
> +		break;
> +	case DP_REMOTE_I2C_WRITE:
> +		kfree(out.u.i2c_write.bytes);
> +		break;
> +	}
> +
> +	/* Clear everything but the req_type for the input */
> +	memset(&in->u, 0, sizeof(in->u));
> +
> +	return true;
> +}
> +
> +int igt_dp_mst_sideband_msg_req_decode(void *unused)
> +{
> +	struct drm_dp_sideband_msg_req_body in = { 0 };
> +	u8 data[] = { 0xff, 0x0, 0xdd };
> +	int i;
> +
> +#define DO_TEST() FAIL_ON(!sideband_msg_req_encode_decode(&in))
> +
> +	in.req_type = DP_ENUM_PATH_RESOURCES;
> +	in.u.port_num.port_number = 5;
> +	DO_TEST();
> +
> +	in.req_type = DP_POWER_UP_PHY;
> +	in.u.port_num.port_number = 5;
> +	DO_TEST();
> +
> +	in.req_type = DP_POWER_DOWN_PHY;
> +	in.u.port_num.port_number = 5;
> +	DO_TEST();
> +
> +	in.req_type = DP_ALLOCATE_PAYLOAD;
> +	in.u.allocate_payload.number_sdp_streams = 3;
> +	for (i = 0; i < in.u.allocate_payload.number_sdp_streams; i++)
> +		in.u.allocate_payload.sdp_stream_sink[i] = i + 1;
> +	DO_TEST();
> +	in.u.allocate_payload.port_number = 0xf;
> +	DO_TEST();
> +	in.u.allocate_payload.vcpi = 0x7f;
> +	DO_TEST();
> +	in.u.allocate_payload.pbn = U16_MAX;
> +	DO_TEST();
> +
> +	in.req_type = DP_QUERY_PAYLOAD;
> +	in.u.query_payload.port_number = 0xf;
> +	DO_TEST();
> +	in.u.query_payload.vcpi = 0x7f;
> +	DO_TEST();
> +
> +	in.req_type = DP_REMOTE_DPCD_READ;
> +	in.u.dpcd_read.port_number = 0xf;
> +	DO_TEST();
> +	in.u.dpcd_read.dpcd_address = 0xfedcb;
> +	DO_TEST();
> +	in.u.dpcd_read.num_bytes = U8_MAX;
> +	DO_TEST();
> +
> +	in.req_type = DP_REMOTE_DPCD_WRITE;
> +	in.u.dpcd_write.port_number = 0xf;
> +	DO_TEST();
> +	in.u.dpcd_write.dpcd_address = 0xfedcb;
> +	DO_TEST();
> +	in.u.dpcd_write.num_bytes = ARRAY_SIZE(data);
> +	in.u.dpcd_write.bytes = data;
> +	DO_TEST();
> +
> +	in.req_type = DP_REMOTE_I2C_READ;
> +	in.u.i2c_read.port_number = 0xf;
> +	DO_TEST();
> +	in.u.i2c_read.read_i2c_device_id = 0x7f;
> +	DO_TEST();
> +	in.u.i2c_read.num_transactions = 3;
> +	in.u.i2c_read.num_bytes_read = ARRAY_SIZE(data) * 3;
> +	for (i = 0; i < in.u.i2c_read.num_transactions; i++) {
> +		in.u.i2c_read.transactions[i].bytes = data;
> +		in.u.i2c_read.transactions[i].num_bytes = ARRAY_SIZE(data);
> +		in.u.i2c_read.transactions[i].i2c_dev_id = 0x7f & ~i;
> +		in.u.i2c_read.transactions[i].i2c_transaction_delay = 0xf & ~i;
> +	}
> +	DO_TEST();
> +
> +	in.req_type = DP_REMOTE_I2C_WRITE;
> +	in.u.i2c_write.port_number = 0xf;
> +	DO_TEST();
> +	in.u.i2c_write.write_i2c_device_id = 0x7f;
> +	DO_TEST();
> +	in.u.i2c_write.num_bytes = ARRAY_SIZE(data);
> +	in.u.i2c_write.bytes = data;
> +	DO_TEST();
> +
> +#undef DO_TEST
> +	return 0;
> +}
> diff --git a/drivers/gpu/drm/selftests/test-drm_modeset_common.h b/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> index 590bda35a683..0fcb8bbc6a1b 100644
> --- a/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> +++ b/drivers/gpu/drm/selftests/test-drm_modeset_common.h
> @@ -40,5 +40,6 @@ int igt_damage_iter_damage_one_outside(void *ignored);
>  int igt_damage_iter_damage_src_moved(void *ignored);
>  int igt_damage_iter_damage_not_visible(void *ignored);
>  int igt_dp_mst_calc_pbn_mode(void *ignored);
> +int igt_dp_mst_sideband_msg_req_decode(void *ignored);
>  
>  #endif
> diff --git a/include/drm/drm_dp_mst_helper.h b/include/drm/drm_dp_mst_helper.h
> index 4a4507fe928d..5423a8adda78 100644
> --- a/include/drm/drm_dp_mst_helper.h
> +++ b/include/drm/drm_dp_mst_helper.h
> @@ -293,7 +293,7 @@ struct drm_dp_remote_dpcd_write {
>  struct drm_dp_remote_i2c_read {
>  	u8 num_transactions;
>  	u8 port_number;
> -	struct {
> +	struct drm_dp_remote_i2c_read_tx {
>  		u8 i2c_dev_id;
>  		u8 num_bytes;
>  		u8 *bytes;

-- 
Jani Nikula, Intel Open Source Graphics Center


More information about the amd-gfx mailing list