[PATCH 2/3] drm/amdkfd: Use setup_vm_pt_regs function from base driver in KFD

[Zhao, Yong]

This was done on GFX9 previously, now do it for GFX10.

Change-Id: I4442e60534c59bc9526a673559f018ba8058deac
Signed-off-by: Yong Zhao <Yong.Zhao at amd.com>
---
 .../drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c    | 23 +++----------------
 1 file changed, 3 insertions(+), 20 deletions(-)

diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c
index fe5b702c75ce..64568ed32793 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_amdkfd_gfx_v10.c
@@ -42,6 +42,7 @@
 #include "v10_structs.h"
 #include "nv.h"
 #include "nvd.h"
+#include "gfxhub_v2_0.h"
 
 enum hqd_dequeue_request_type {
 	NO_ACTION = 0,
@@ -251,11 +252,6 @@ static int kgd_set_pasid_vmid_mapping(struct kgd_dev *kgd, unsigned int pasid,
 			ATC_VMID0_PASID_MAPPING__VALID_MASK;
 
 	pr_debug("pasid 0x%x vmid %d, reg value %x\n", pasid, vmid, pasid_mapping);
-	/*
-	 * need to do this twice, once for gfx and once for mmhub
-	 * for ATC add 16 to VMID for mmhub, for IH different registers.
-	 * ATC_VMID0..15 registers are separate from ATC_VMID16..31.
-	 */
 
 	pr_debug("ATHUB, reg %x\n", SOC15_REG_OFFSET(ATHUB, 0, mmATC_VMID0_PASID_MAPPING) + vmid);
 	WREG32(SOC15_REG_OFFSET(ATHUB, 0, mmATC_VMID0_PASID_MAPPING) + vmid,
@@ -910,7 +906,6 @@ static void set_vm_context_page_table_base(struct kgd_dev *kgd, uint32_t vmid,
 		uint64_t page_table_base)
 {
 	struct amdgpu_device *adev = get_amdgpu_device(kgd);
-	uint64_t base = page_table_base | AMDGPU_PTE_VALID;
 
 	if (!amdgpu_amdkfd_is_kfd_vmid(adev, vmid)) {
 		pr_err("trying to set page table base for wrong VMID %u\n",
@@ -918,18 +913,6 @@ static void set_vm_context_page_table_base(struct kgd_dev *kgd, uint32_t vmid,
 		return;
 	}
 
-	/* TODO: take advantage of per-process address space size. For
-	 * now, all processes share the same address space size, like
-	 * on GFX8 and older.
-	 */
-	WREG32(SOC15_REG_OFFSET(GC, 0, mmGCVM_CONTEXT0_PAGE_TABLE_START_ADDR_LO32) + (vmid*2), 0);
-	WREG32(SOC15_REG_OFFSET(GC, 0, mmGCVM_CONTEXT0_PAGE_TABLE_START_ADDR_HI32) + (vmid*2), 0);
-
-	WREG32(SOC15_REG_OFFSET(GC, 0, mmGCVM_CONTEXT0_PAGE_TABLE_END_ADDR_LO32) + (vmid*2),
-			lower_32_bits(adev->vm_manager.max_pfn - 1));
-	WREG32(SOC15_REG_OFFSET(GC, 0, mmGCVM_CONTEXT0_PAGE_TABLE_END_ADDR_HI32) + (vmid*2),
-			upper_32_bits(adev->vm_manager.max_pfn - 1));
-
-	WREG32(SOC15_REG_OFFSET(GC, 0, mmGCVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_LO32) + (vmid*2), lower_32_bits(base));
-	WREG32(SOC15_REG_OFFSET(GC, 0, mmGCVM_CONTEXT0_PAGE_TABLE_BASE_ADDR_HI32) + (vmid*2), upper_32_bits(base));
+	/* SDMA is on gfxhub as well on Navi1* series */
+	gfxhub_v2_0_setup_vm_pt_regs(adev, vmid, page_table_base);
 }
-- 
2.17.1