[PATCH 2/2] drm/amd/powerplay: put VCN/JPEG into PG ungate state before dpm table setup
Evan Quan
evan.quan at amd.com
Mon Aug 3 04:46:48 UTC 2020
As VCN related dpm table setup needs VCN be in PG ungate state. Same logics
applies to JPEG.
Change-Id: I94335efc4e0424cfe0991e984c938998fd8f1287
Signed-off-by: Evan Quan <evan.quan at amd.com>
---
drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 38 +++++++++++++++++-----
1 file changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
index 85b04c48bd09..1349d05c5f3d 100644
--- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
+++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
@@ -134,7 +134,8 @@ int smu_get_dpm_freq_range(struct smu_context *smu,
}
static int smu_dpm_set_vcn_enable(struct smu_context *smu,
- bool enable)
+ bool enable,
+ int *previous_pg_state)
{
struct smu_power_context *smu_power = &smu->smu_power;
struct smu_power_gate *power_gate = &smu_power->power_gate;
@@ -148,6 +149,9 @@ static int smu_dpm_set_vcn_enable(struct smu_context *smu,
if (atomic_read(&power_gate->vcn_gated) ^ enable)
goto out;
+ if (previous_pg_state)
+ *previous_pg_state = atomic_read(&power_gate->vcn_gated);
+
ret = smu->ppt_funcs->dpm_set_vcn_enable(smu, enable);
if (!ret)
atomic_set(&power_gate->vcn_gated, !enable);
@@ -159,7 +163,8 @@ static int smu_dpm_set_vcn_enable(struct smu_context *smu,
}
static int smu_dpm_set_jpeg_enable(struct smu_context *smu,
- bool enable)
+ bool enable,
+ int *previous_pg_state)
{
struct smu_power_context *smu_power = &smu->smu_power;
struct smu_power_gate *power_gate = &smu_power->power_gate;
@@ -173,6 +178,9 @@ static int smu_dpm_set_jpeg_enable(struct smu_context *smu,
if (atomic_read(&power_gate->jpeg_gated) ^ enable)
goto out;
+ if (previous_pg_state)
+ *previous_pg_state = atomic_read(&power_gate->jpeg_gated);
+
ret = smu->ppt_funcs->dpm_set_jpeg_enable(smu, enable);
if (!ret)
atomic_set(&power_gate->jpeg_gated, !enable);
@@ -212,7 +220,7 @@ int smu_dpm_set_power_gate(struct smu_context *smu, uint32_t block_type,
*/
case AMD_IP_BLOCK_TYPE_UVD:
case AMD_IP_BLOCK_TYPE_VCN:
- ret = smu_dpm_set_vcn_enable(smu, !gate);
+ ret = smu_dpm_set_vcn_enable(smu, !gate, NULL);
if (ret)
dev_err(smu->adev->dev, "Failed to power %s VCN!\n",
gate ? "gate" : "ungate");
@@ -230,7 +238,7 @@ int smu_dpm_set_power_gate(struct smu_context *smu, uint32_t block_type,
gate ? "gate" : "ungate");
break;
case AMD_IP_BLOCK_TYPE_JPEG:
- ret = smu_dpm_set_jpeg_enable(smu, !gate);
+ ret = smu_dpm_set_jpeg_enable(smu, !gate, NULL);
if (ret)
dev_err(smu->adev->dev, "Failed to power %s JPEG!\n",
gate ? "gate" : "ungate");
@@ -407,6 +415,7 @@ static int smu_late_init(void *handle)
{
struct amdgpu_device *adev = (struct amdgpu_device *)handle;
struct smu_context *smu = &adev->smu;
+ int vcn_gate, jpeg_gate;
int ret = 0;
if (!smu->pm_enabled)
@@ -418,6 +427,14 @@ static int smu_late_init(void *handle)
return ret;
}
+ /*
+ * 1. Power up VCN/JPEG as the succeeding smu_set_default_dpm_table()
+ * needs VCN/JPEG up.
+ * 2. Save original gate states and then we can restore back afterwards.
+ */
+ smu_dpm_set_vcn_enable(smu, true, &vcn_gate);
+ smu_dpm_set_jpeg_enable(smu, true, &jpeg_gate);
+
/*
* Set initialized values (get from vbios) to dpm tables context such as
* gfxclk, memclk, dcefclk, and etc. And enable the DPM feature for each
@@ -429,6 +446,11 @@ static int smu_late_init(void *handle)
return ret;
}
+ /* Restore back to original VCN/JPEG power gate states */
+ smu_dpm_set_vcn_enable(smu, !vcn_gate, NULL);
+ smu_dpm_set_jpeg_enable(smu, !vcn_gate, NULL);
+
+
ret = smu_populate_umd_state_clk(smu);
if (ret) {
dev_err(adev->dev, "Failed to populate UMD state clocks!\n");
@@ -991,8 +1013,8 @@ static int smu_hw_init(void *handle)
if (smu->is_apu) {
smu_powergate_sdma(&adev->smu, false);
- smu_dpm_set_vcn_enable(smu, true);
- smu_dpm_set_jpeg_enable(smu, true);
+ smu_dpm_set_vcn_enable(smu, true, NULL);
+ smu_dpm_set_jpeg_enable(smu, true, NULL);
smu_set_gfx_cgpg(&adev->smu, true);
}
@@ -1132,8 +1154,8 @@ static int smu_hw_fini(void *handle)
if (smu->is_apu) {
smu_powergate_sdma(&adev->smu, true);
- smu_dpm_set_vcn_enable(smu, false);
- smu_dpm_set_jpeg_enable(smu, false);
+ smu_dpm_set_vcn_enable(smu, false, NULL);
+ smu_dpm_set_jpeg_enable(smu, false, NULL);
}
if (!smu->pm_enabled)
--
2.28.0
More information about the amd-gfx
mailing list