[PATCH] drm/amd/display: Add aconnector condition check for dpcd read

[Zhan Liu]

[Why]
core_link_read_dpcd() will invoke dm_helpers_dp_read_dpcd(),
which needs to read dpcd info with the help of aconnector.
If aconnector (dc->links[i]->prev) is NULL, then dpcd status
 cannot be read.

As a result, dpcd read fails and a line of error will be
printed out in dmesg.log as:
"*ERROR* Failed to found connector for link!"

[How]
Make sure that aconnector (dc->links[i]->prev) is not NULL,
then read dpcd status.

Signed-off-by: Zhan Liu <zhan.liu at amd.com>
---
 .../amd/display/dc/dcn10/dcn10_hw_sequencer.c | 19 ++++++++++++++-----
 1 file changed, 14 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
index 42fcfee2c31b..92e1574073fd 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn10/dcn10_hw_sequencer.c
@@ -1331,11 +1331,20 @@ void dcn10_init_hw(struct dc *dc)
 			if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT) {
 				continue;
 			}
-			/* if any of the displays are lit up turn them off */
-			status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
-						     &dpcd_power_state, sizeof(dpcd_power_state));
-			if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
-				dp_receiver_power_ctrl(dc->links[i], false);
+
+			/*
+			 * core_link_read_dpcd() will invoke dm_helpers_dp_read_dpcd(),
+			 * which needs to read dpcd info with the help of aconnector.
+			 * If aconnector (dc->links[i]->prev) is NULL, then dpcd status
+			 * cannot be read.
+			 */
+			if (dc->links[i]->priv) {
+				/* if any of the displays are lit up turn them off */
+				status = core_link_read_dpcd(dc->links[i], DP_SET_POWER,
+								&dpcd_power_state, sizeof(dpcd_power_state));
+				if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) {
+					dp_receiver_power_ctrl(dc->links[i], false);
+				}
 			}
 		}
 	}
-- 
2.17.1