[PATCH 2/5] drm/amd/amdgpu: L1 Policy(2/5) - removed GC GRBM violations from gfxhub
Jane Jian
Jane.Jian at amd.com
Fri Jan 3 09:56:46 UTC 2020
From: Zhigang Luo <zhigang.luo at amd.com>
Signed-off-by: Zhigang Luo <zhigang.luo at amd.com>
Signed-off-by: Jane Jian <jane.jian at amd.com>
---
drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c | 79 +++++++++++++-----------
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c | 2 +-
2 files changed, 44 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
index e9a9d24c2b7f..1a2f18b908fe 100644
--- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v1_0.c
@@ -75,40 +75,45 @@ static void gfxhub_v1_0_init_system_aperture_regs(struct amdgpu_device *adev)
WREG32_SOC15_RLC(GC, 0, mmMC_VM_AGP_BOT, adev->gmc.agp_start >> 24);
WREG32_SOC15_RLC(GC, 0, mmMC_VM_AGP_TOP, adev->gmc.agp_end >> 24);
- /* Program the system aperture low logical page number. */
- WREG32_SOC15_RLC(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR,
- min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
-
- if (adev->asic_type == CHIP_RAVEN && adev->rev_id >= 0x8)
- /*
- * Raven2 has a HW issue that it is unable to use the vram which
- * is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR. So here is the
- * workaround that increase system aperture high address (add 1)
- * to get rid of the VM fault and hardware hang.
- */
- WREG32_SOC15_RLC(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
- max((adev->gmc.fb_end >> 18) + 0x1,
- adev->gmc.agp_end >> 18));
- else
- WREG32_SOC15_RLC(GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
- max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18);
-
- /* Set default page address. */
- value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start
- + adev->vm_manager.vram_base_offset;
- WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_LSB,
- (u32)(value >> 12));
- WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_MSB,
- (u32)(value >> 44));
-
- /* Program "protection fault". */
- WREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_DEFAULT_ADDR_LO32,
- (u32)(adev->dummy_page_addr >> 12));
- WREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_DEFAULT_ADDR_HI32,
- (u32)((u64)adev->dummy_page_addr >> 44));
-
- WREG32_FIELD15(GC, 0, VM_L2_PROTECTION_FAULT_CNTL2,
- ACTIVE_PAGE_MIGRATION_PTE_READ_RETRY, 1);
+ if (!amdgpu_sriov_vf(adev) || adev->asic_type <= CHIP_VEGA10) {
+ /* Program the system aperture low logical page number. */
+ WREG32_SOC15_RLC(GC, 0, mmMC_VM_SYSTEM_APERTURE_LOW_ADDR,
+ min(adev->gmc.fb_start, adev->gmc.agp_start) >> 18);
+
+ if (adev->asic_type == CHIP_RAVEN && adev->rev_id >= 0x8)
+ /*
+ * Raven2 has a HW issue that it is unable to use the
+ * vram which is out of MC_VM_SYSTEM_APERTURE_HIGH_ADDR.
+ * So here is the workaround that increase system
+ * aperture high address (add 1) to get rid of the VM
+ * fault and hardware hang.
+ */
+ WREG32_SOC15_RLC(GC, 0,
+ mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ max((adev->gmc.fb_end >> 18) + 0x1,
+ adev->gmc.agp_end >> 18));
+ else
+ WREG32_SOC15_RLC(
+ GC, 0, mmMC_VM_SYSTEM_APERTURE_HIGH_ADDR,
+ max(adev->gmc.fb_end, adev->gmc.agp_end) >> 18);
+
+ /* Set default page address. */
+ value = adev->vram_scratch.gpu_addr - adev->gmc.vram_start +
+ adev->vm_manager.vram_base_offset;
+ WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_LSB,
+ (u32)(value >> 12));
+ WREG32_SOC15(GC, 0, mmMC_VM_SYSTEM_APERTURE_DEFAULT_ADDR_MSB,
+ (u32)(value >> 44));
+
+ /* Program "protection fault". */
+ WREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_DEFAULT_ADDR_LO32,
+ (u32)(adev->dummy_page_addr >> 12));
+ WREG32_SOC15(GC, 0, mmVM_L2_PROTECTION_FAULT_DEFAULT_ADDR_HI32,
+ (u32)((u64)adev->dummy_page_addr >> 44));
+
+ WREG32_FIELD15(GC, 0, VM_L2_PROTECTION_FAULT_CNTL2,
+ ACTIVE_PAGE_MIGRATION_PTE_READ_RETRY, 1);
+ }
}
static void gfxhub_v1_0_init_tlb_regs(struct amdgpu_device *adev)
@@ -280,10 +285,12 @@ int gfxhub_v1_0_gart_enable(struct amdgpu_device *adev)
gfxhub_v1_0_init_gart_aperture_regs(adev);
gfxhub_v1_0_init_system_aperture_regs(adev);
gfxhub_v1_0_init_tlb_regs(adev);
- gfxhub_v1_0_init_cache_regs(adev);
+ if (!amdgpu_sriov_vf(adev))
+ gfxhub_v1_0_init_cache_regs(adev);
gfxhub_v1_0_enable_system_domain(adev);
- gfxhub_v1_0_disable_identity_aperture(adev);
+ if (!amdgpu_sriov_vf(adev))
+ gfxhub_v1_0_disable_identity_aperture(adev);
gfxhub_v1_0_setup_vmid_config(adev);
gfxhub_v1_0_program_invalidation(adev);
diff --git a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
index 4f72626fbce9..2f4a013b3344 100644
--- a/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
+++ b/drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c
@@ -1307,8 +1307,8 @@ static int gmc_v9_0_hw_init(void *handle)
else
value = true;
- gfxhub_v1_0_set_fault_enable_default(adev, value);
if (!amdgpu_sriov_vf(adev)) {
+ gfxhub_v1_0_set_fault_enable_default(adev, value);
if (adev->asic_type == CHIP_ARCTURUS)
mmhub_v9_4_set_fault_enable_default(adev, value);
else
--
2.17.1
More information about the amd-gfx
mailing list