[PATCH 06/22] drm/amd/display: check pipe_ctx is split pipe or not

[Bhawanpreet Lakha]

From: Paul Hsieh <paul.hsieh at amd.com>

[Why]
Driver use pipe_ctx to reallocate payload may cause allocate
payload twice on same sink with split pipe.

[How]
Drvier must to check pipe_ctx is split pipe or not to avoid
reallocate payload twice on same sink.

Signed-off-by: Paul Hsieh <paul.hsieh at amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng at amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha at amd.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index 260c0b62d37d..a50768a7ba68 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -2882,7 +2882,16 @@ enum dc_status dc_link_reallocate_mst_payload(struct dc_link *link)
 	// Clear all of MST payload then reallocate
 	for (i = 0; i < MAX_PIPES; i++) {
 		pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
-		if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link &&
+
+		/* driver enable split pipe for external monitors
+		 * we have to check pipe_ctx is split pipe or not
+		 * If it's split pipe, driver using top pipe to
+		 * reaallocate.
+		 */
+		if (!pipe_ctx || pipe_ctx->top_pipe)
+			continue;
+
+		if (pipe_ctx->stream && pipe_ctx->stream->link == link &&
 				pipe_ctx->stream->dpms_off == false &&
 				pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
 			deallocate_mst_payload(pipe_ctx);
@@ -2891,7 +2900,11 @@ enum dc_status dc_link_reallocate_mst_payload(struct dc_link *link)
 
 	for (i = 0; i < MAX_PIPES; i++) {
 		pipe_ctx = &link->dc->current_state->res_ctx.pipe_ctx[i];
-		if (pipe_ctx && pipe_ctx->stream && pipe_ctx->stream->link == link &&
+
+		if (!pipe_ctx || pipe_ctx->top_pipe)
+			continue;
+
+		if (pipe_ctx->stream && pipe_ctx->stream->link == link &&
 				pipe_ctx->stream->dpms_off == false &&
 				pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
 			/* enable/disable PHY will clear connection between BE and FE
-- 
2.17.1