[PATCH v2 1/1] drm/dp_mst: Handle SST-only branch device case

Lyude Paul lyude at redhat.com
Sat Jan 18 00:18:11 UTC 2020


Pushed to drm-misc-fixes, thanks!

On Fri, 2020-01-17 at 14:03 +0800, Wayne Lin wrote:
> [Why]
> While handling LINK_ADDRESS reply, current code expects a peer device
> can handle sideband message once the peer device type is reported as
> DP_PEER_DEVICE_MST_BRANCHING. However, when the connected device is
> a SST branch case, it can't handle the sideband message(MST_CAP=0 in
> DPCD 00021h).
> 
> Current code will try to send LINK_ADDRESS to SST branch device and end
> up with message timeout and monitor can't display normally. As the
> result of that, we should take SST branch device into account.
> 
> [How]
> According to DP 1.4 spec, we can use Peer_Device_Type as
> DP_PEER_DEVICE_MST_BRANCHING and Message_Capability_Status as 0 to
> indicate peer device as a SST-only branch device.
> 
> Fix following:
> - Add the function drm_dp_mst_is_dp_mst_end_device() to decide whether a
> peer device connected to a DFP is mst end device. Which also indicates
> if the peer device is capable of handling message or not.
> - Take SST-only branch device case into account in
> drm_dp_port_set_pdt() and add a new parameter 'new_mcs'. Take sst branch
> device case as the same case as DP_PEER_DEVICE_DP_LEGACY_CONV and
> DP_PEER_DEVICE_SST_SINK. All original handling logics remain.
> - Take SST-only branch device case into account in
> drm_dp_mst_port_add_connector().
> - Fix some parts in drm_dp_mst_handle_link_address_port() to have SST
> branch device case into consideration.
> - Fix the arguments of drm_dp_port_set_pdt() in
> drm_dp_mst_handle_conn_stat().
> - Have SST branch device also report
> connector_status_connected when the ddps is true
> in drm_dp_mst_detect_port()
> - Fix the arguments of drm_dp_port_set_pdt() in
> drm_dp_delayed_destroy_port()
> 
> Changes since v1:(https://patchwork.kernel.org/patch/11323079/)
> * Squash previous patch into one patch and merge the commit message here.
> * Combine the if statements mentioned in comments
> 
> Fixes: c485e2c97dae ("drm/dp_mst: Refactor pdt setup/teardown, add more
> locking")
> Cc: Ville Syrjälä <ville.syrjala at linux.intel.com>
> Cc: Harry Wentland <hwentlan at amd.com>
> Cc: Lyude Paul <lyude at redhat.com>
> Signed-off-by: Wayne Lin <Wayne.Lin at amd.com>
> Reviewed-by: Lyude Paul <lyude at redhat.com>
> ---
>  drivers/gpu/drm/drm_dp_mst_topology.c | 140 +++++++++++++++-----------
>  1 file changed, 80 insertions(+), 60 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_dp_mst_topology.c
> b/drivers/gpu/drm/drm_dp_mst_topology.c
> index 79691c553182..c40a9bd63cfb 100644
> --- a/drivers/gpu/drm/drm_dp_mst_topology.c
> +++ b/drivers/gpu/drm/drm_dp_mst_topology.c
> @@ -1914,73 +1914,90 @@ static u8 drm_dp_calculate_rad(struct
> drm_dp_mst_port *port,
>  	return parent_lct + 1;
>  }
>  
> -static int drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt)
> +static bool drm_dp_mst_is_dp_mst_end_device(u8 pdt, bool mcs)
> +{
> +	switch (pdt) {
> +	case DP_PEER_DEVICE_DP_LEGACY_CONV:
> +	case DP_PEER_DEVICE_SST_SINK:
> +		return true;
> +	case DP_PEER_DEVICE_MST_BRANCHING:
> +		/* For sst branch device */
> +		if (!mcs)
> +			return true;
> +
> +		return false;
> +	}
> +	return true;
> +}
> +
> +static int
> +drm_dp_port_set_pdt(struct drm_dp_mst_port *port, u8 new_pdt,
> +		    bool new_mcs)
>  {
>  	struct drm_dp_mst_topology_mgr *mgr = port->mgr;
>  	struct drm_dp_mst_branch *mstb;
>  	u8 rad[8], lct;
>  	int ret = 0;
>  
> -	if (port->pdt == new_pdt)
> +	if (port->pdt == new_pdt && port->mcs == new_mcs)
>  		return 0;
>  
>  	/* Teardown the old pdt, if there is one */
> -	switch (port->pdt) {
> -	case DP_PEER_DEVICE_DP_LEGACY_CONV:
> -	case DP_PEER_DEVICE_SST_SINK:
> -		/*
> -		 * If the new PDT would also have an i2c bus, don't bother
> -		 * with reregistering it
> -		 */
> -		if (new_pdt == DP_PEER_DEVICE_DP_LEGACY_CONV ||
> -		    new_pdt == DP_PEER_DEVICE_SST_SINK) {
> -			port->pdt = new_pdt;
> -			return 0;
> -		}
> +	if (port->pdt != DP_PEER_DEVICE_NONE) {
> +		if (drm_dp_mst_is_dp_mst_end_device(port->pdt, port->mcs)) {
> +			/*
> +			 * If the new PDT would also have an i2c bus,
> +			 * don't bother with reregistering it
> +			 */
> +			if (new_pdt != DP_PEER_DEVICE_NONE &&
> +			    drm_dp_mst_is_dp_mst_end_device(new_pdt, new_mcs))
> {
> +				port->pdt = new_pdt;
> +				port->mcs = new_mcs;
> +				return 0;
> +			}
>  
> -		/* remove i2c over sideband */
> -		drm_dp_mst_unregister_i2c_bus(&port->aux);
> -		break;
> -	case DP_PEER_DEVICE_MST_BRANCHING:
> -		mutex_lock(&mgr->lock);
> -		drm_dp_mst_topology_put_mstb(port->mstb);
> -		port->mstb = NULL;
> -		mutex_unlock(&mgr->lock);
> -		break;
> +			/* remove i2c over sideband */
> +			drm_dp_mst_unregister_i2c_bus(&port->aux);
> +		} else {
> +			mutex_lock(&mgr->lock);
> +			drm_dp_mst_topology_put_mstb(port->mstb);
> +			port->mstb = NULL;
> +			mutex_unlock(&mgr->lock);
> +		}
>  	}
>  
>  	port->pdt = new_pdt;
> -	switch (port->pdt) {
> -	case DP_PEER_DEVICE_DP_LEGACY_CONV:
> -	case DP_PEER_DEVICE_SST_SINK:
> -		/* add i2c over sideband */
> -		ret = drm_dp_mst_register_i2c_bus(&port->aux);
> -		break;
> +	port->mcs = new_mcs;
>  
> -	case DP_PEER_DEVICE_MST_BRANCHING:
> -		lct = drm_dp_calculate_rad(port, rad);
> -		mstb = drm_dp_add_mst_branch_device(lct, rad);
> -		if (!mstb) {
> -			ret = -ENOMEM;
> -			DRM_ERROR("Failed to create MSTB for port %p", port);
> -			goto out;
> -		}
> +	if (port->pdt != DP_PEER_DEVICE_NONE) {
> +		if (drm_dp_mst_is_dp_mst_end_device(port->pdt, port->mcs)) {
> +			/* add i2c over sideband */
> +			ret = drm_dp_mst_register_i2c_bus(&port->aux);
> +		} else {
> +			lct = drm_dp_calculate_rad(port, rad);
> +			mstb = drm_dp_add_mst_branch_device(lct, rad);
> +			if (!mstb) {
> +				ret = -ENOMEM;
> +				DRM_ERROR("Failed to create MSTB for port %p",
> +					  port);
> +				goto out;
> +			}
>  
> -		mutex_lock(&mgr->lock);
> -		port->mstb = mstb;
> -		mstb->mgr = port->mgr;
> -		mstb->port_parent = port;
> +			mutex_lock(&mgr->lock);
> +			port->mstb = mstb;
> +			mstb->mgr = port->mgr;
> +			mstb->port_parent = port;
>  
> -		/*
> -		 * Make sure this port's memory allocation stays
> -		 * around until its child MSTB releases it
> -		 */
> -		drm_dp_mst_get_port_malloc(port);
> -		mutex_unlock(&mgr->lock);
> +			/*
> +			 * Make sure this port's memory allocation stays
> +			 * around until its child MSTB releases it
> +			 */
> +			drm_dp_mst_get_port_malloc(port);
> +			mutex_unlock(&mgr->lock);
>  
> -		/* And make sure we send a link address for this */
> -		ret = 1;
> -		break;
> +			/* And make sure we send a link address for this */
> +			ret = 1;
> +		}
>  	}
>  
>  out:
> @@ -2133,9 +2150,8 @@ drm_dp_mst_port_add_connector(struct drm_dp_mst_branch
> *mstb,
>  		goto error;
>  	}
>  
> -	if ((port->pdt == DP_PEER_DEVICE_DP_LEGACY_CONV ||
> -	     port->pdt == DP_PEER_DEVICE_SST_SINK) &&
> -	    port->port_num >= DP_MST_LOGICAL_PORT_0) {
> +	if (port->pdt != DP_PEER_DEVICE_NONE &&
> +	    drm_dp_mst_is_dp_mst_end_device(port->pdt, port->mcs)) {
>  		port->cached_edid = drm_get_edid(port->connector,
>  						 &port->aux.ddc);
>  		drm_connector_set_tile_property(port->connector);
> @@ -2203,6 +2219,7 @@ drm_dp_mst_handle_link_address_port(struct
> drm_dp_mst_branch *mstb,
>  	struct drm_dp_mst_port *port;
>  	int old_ddps = 0, ret;
>  	u8 new_pdt = DP_PEER_DEVICE_NONE;
> +	bool new_mcs = 0;
>  	bool created = false, send_link_addr = false, changed = false;
>  
>  	port = drm_dp_get_port(mstb, port_msg->port_number);
> @@ -2247,7 +2264,7 @@ drm_dp_mst_handle_link_address_port(struct
> drm_dp_mst_branch *mstb,
>  	port->input = port_msg->input_port;
>  	if (!port->input)
>  		new_pdt = port_msg->peer_device_type;
> -	port->mcs = port_msg->mcs;
> +	new_mcs = port_msg->mcs;
>  	port->ddps = port_msg->ddps;
>  	port->ldps = port_msg->legacy_device_plug_status;
>  	port->dpcd_rev = port_msg->dpcd_revision;
> @@ -2275,7 +2292,7 @@ drm_dp_mst_handle_link_address_port(struct
> drm_dp_mst_branch *mstb,
>  		}
>  	}
>  
> -	ret = drm_dp_port_set_pdt(port, new_pdt);
> +	ret = drm_dp_port_set_pdt(port, new_pdt, new_mcs);
>  	if (ret == 1) {
>  		send_link_addr = true;
>  	} else if (ret < 0) {
> @@ -2289,7 +2306,8 @@ drm_dp_mst_handle_link_address_port(struct
> drm_dp_mst_branch *mstb,
>  	 * we're coming out of suspend. In this case, always resend the link
>  	 * address if there's an MSTB on this port
>  	 */
> -	if (!created && port->pdt == DP_PEER_DEVICE_MST_BRANCHING)
> +	if (!created && port->pdt == DP_PEER_DEVICE_MST_BRANCHING &&
> +	    port->mcs)
>  		send_link_addr = true;
>  
>  	if (port->connector)
> @@ -2326,6 +2344,7 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch
> *mstb,
>  	struct drm_dp_mst_port *port;
>  	int old_ddps, old_input, ret, i;
>  	u8 new_pdt;
> +	bool new_mcs;
>  	bool dowork = false, create_connector = false;
>  
>  	port = drm_dp_get_port(mstb, conn_stat->port_number);
> @@ -2357,7 +2376,6 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch
> *mstb,
>  	old_ddps = port->ddps;
>  	old_input = port->input;
>  	port->input = conn_stat->input_port;
> -	port->mcs = conn_stat->message_capability_status;
>  	port->ldps = conn_stat->legacy_device_plug_status;
>  	port->ddps = conn_stat->displayport_device_plug_status;
>  
> @@ -2370,8 +2388,8 @@ drm_dp_mst_handle_conn_stat(struct drm_dp_mst_branch
> *mstb,
>  	}
>  
>  	new_pdt = port->input ? DP_PEER_DEVICE_NONE : conn_stat-
> >peer_device_type;
> -
> -	ret = drm_dp_port_set_pdt(port, new_pdt);
> +	new_mcs = conn_stat->message_capability_status;
> +	ret = drm_dp_port_set_pdt(port, new_pdt, new_mcs);
>  	if (ret == 1) {
>  		dowork = true;
>  	} else if (ret < 0) {
> @@ -3938,6 +3956,8 @@ drm_dp_mst_detect_port(struct drm_connector
> *connector,
>  	switch (port->pdt) {
>  	case DP_PEER_DEVICE_NONE:
>  	case DP_PEER_DEVICE_MST_BRANCHING:
> +		if (!port->mcs)
> +			ret = connector_status_connected;
>  		break;
>  
>  	case DP_PEER_DEVICE_SST_SINK:
> @@ -4572,7 +4592,7 @@ drm_dp_delayed_destroy_port(struct drm_dp_mst_port
> *port)
>  	if (port->connector)
>  		port->mgr->cbs->destroy_connector(port->mgr, port->connector);
>  
> -	drm_dp_port_set_pdt(port, DP_PEER_DEVICE_NONE);
> +	drm_dp_port_set_pdt(port, DP_PEER_DEVICE_NONE, port->mcs);
>  	drm_dp_mst_put_port_malloc(port);
>  }
>  
-- 
Cheers,
	Lyude Paul



More information about the amd-gfx mailing list