[PATCH 10/33] drm/amd/display: Wait for clean shutdown in DMCUB reset

Bhawanpreet Lakha Bhawanpreet.Lakha at amd.com
Fri Jan 31 22:16:20 UTC 2020


From: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>

[Why]
The DMCUB may be currently executing commands when the reset is
triggered.

Before issuing a reset we should first wait for the DMCUB to finish
its work.

[How]
Send the GPINT command for halting the firmware before reset.

Get the ack for the command then wait for the scratch register to
become the correct value.

We want this to take under ~40us or so at most before we force reset
to cover PHY delay sequence max time.

Each register read will be at least ~1-3us so don't bother using udelay.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas at amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng at amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha at amd.com>
---
 .../drm/amd/display/dmub/inc/dmub_gpint_cmd.h |  6 ++++
 .../gpu/drm/amd/display/dmub/src/dmub_dcn20.c | 36 +++++++++++++++++++
 2 files changed, 42 insertions(+)

diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_gpint_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_gpint_cmd.h
index 5398ed6b35d1..e13685917dab 100644
--- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_gpint_cmd.h
+++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_gpint_cmd.h
@@ -65,4 +65,10 @@ enum dmub_gpint_command {
 	DMUB_GPINT__STOP_FW = 2,
 };
 
+/**
+ * Command responses.
+ */
+
+#define DMUB_GPINT__STOP_FW_RESPONSE 0xDEADDEAD
+
 #endif /* _DMUB_GPINT_CMD_H_ */
diff --git a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c
index 7c1604c2221c..479f17bb3800 100644
--- a/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c
+++ b/drivers/gpu/drm/amd/display/dmub/src/dmub_dcn20.c
@@ -77,6 +77,42 @@ static inline void dmub_dcn20_translate_addr(const union dmub_addr *addr_in,
 
 void dmub_dcn20_reset(struct dmub_srv *dmub)
 {
+	union dmub_gpint_data_register cmd;
+	const uint32_t timeout = 30;
+	uint32_t in_reset, scratch, i;
+
+	REG_GET(DMCUB_CNTL, DMCUB_SOFT_RESET, &in_reset);
+
+	if (in_reset == 0) {
+		cmd.bits.status = 1;
+		cmd.bits.command_code = DMUB_GPINT__STOP_FW;
+		cmd.bits.param = 0;
+
+		dmub->hw_funcs.set_gpint(dmub, cmd);
+
+		/**
+		 * Timeout covers both the ACK and the wait
+		 * for remaining work to finish.
+		 *
+		 * This is mostly bound by the PHY disable sequence.
+		 * Each register check will be greater than 1us, so
+		 * don't bother using udelay.
+		 */
+
+		for (i = 0; i < timeout; ++i) {
+			if (dmub->hw_funcs.is_gpint_acked(dmub, cmd))
+				break;
+		}
+
+		for (i = 0; i < timeout; ++i) {
+			scratch = dmub->hw_funcs.get_gpint_response(dmub);
+			if (scratch == DMUB_GPINT__STOP_FW_RESPONSE)
+				break;
+		}
+
+		/* Force reset in case we timed out, DMCUB is likely hung. */
+	}
+
 	REG_UPDATE(DMCUB_CNTL, DMCUB_SOFT_RESET, 1);
 	REG_UPDATE(DMCUB_CNTL, DMCUB_ENABLE, 0);
 	REG_UPDATE(MMHUBBUB_SOFT_RESET, DMUIF_SOFT_RESET, 1);
-- 
2.17.1



More information about the amd-gfx mailing list