[PATCH 4/4] drm/amdgpu: add module parameter choose reset mode

Sheng, Wenhui Wenhui.Sheng at amd.com
Wed Jul 15 03:06:18 UTC 2020


[AMD Official Use Only - Internal Distribution Only]

> What do you mean with that? To just keep the two "if" more closely together?

I mean generally we want to use if to check value A, we always do like :
	if (cond1(A))
	    xxxx;
	else if (cond2(A))
	    xxxx;
 or
	if (cond1(A))
	    xxxx;
	if (cond2(A))
	    xxxx;

In second case, two conditions could be  true at the same, so when we want to indicate that the program should choose either one or none of the options, the first one should be much more cleaner and better.


Brs
Wenhui
-----Original Message-----
From: Christian König <ckoenig.leichtzumerken at gmail.com> 
Sent: Tuesday, July 14, 2020 7:46 PM
To: Sheng, Wenhui <Wenhui.Sheng at amd.com>; Koenig, Christian <Christian.Koenig at amd.com>; amd-gfx at lists.freedesktop.org
Cc: Gao, Likun <Likun.Gao at amd.com>; Zhang, Hawking <Hawking.Zhang at amd.com>
Subject: Re: [PATCH 4/4] drm/amdgpu: add module parameter choose reset mode

> I use "else if" because I don't want to break the reset_method checking context, it will be much easier for code reviewing later I think.

What do you mean with that? To just keep the two "if" more closely together?

See we usually avoid extra "else" when there is a return in the if to make sure not to confuse the reader.

E.g. and "else" usually implies that both branches converge again after the if and that's not the case if you have a return or goto.

Regards,
Christian.

Am 14.07.20 um 11:58 schrieb Sheng, Wenhui:
> [AMD Official Use Only - Internal Distribution Only]
>
> Well,  drop else will make code much more clean.
> I use "else if" because I don't want to break the reset_method checking context, it will be much easier for code reviewing later I think.
>
> Will refine it anyway:)
>
> Thanks
> Wenhui
> -----Original Message-----
> From: Christian König <ckoenig.leichtzumerken at gmail.com>
> Sent: Tuesday, July 14, 2020 4:36 PM
> To: Sheng, Wenhui <Wenhui.Sheng at amd.com>; 
> amd-gfx at lists.freedesktop.org
> Cc: Gao, Likun <Likun.Gao at amd.com>; Zhang, Hawking 
> <Hawking.Zhang at amd.com>
> Subject: Re: [PATCH 4/4] drm/amdgpu: add module parameter choose reset 
> mode
>
> Am 14.07.20 um 04:29 schrieb Wenhui Sheng:
>> Default value is auto, doesn't change original reset method logic.
>>
>> v2: change to use parameter reset_method
>> v3: add warn msg if specified mode isn't supported
>>
>> Signed-off-by: Likun Gao <Likun.Gao at amd.com>
>> Signed-off-by: Wenhui Sheng <Wenhui.Sheng at amd.com>
>> ---
>>    drivers/gpu/drm/amd/amdgpu/amdgpu.h     | 1 +
>>    drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 8 ++++++++
>>    drivers/gpu/drm/amd/amdgpu/cik.c        | 7 +++++++
>>    drivers/gpu/drm/amd/amdgpu/nv.c         | 7 +++++++
>>    drivers/gpu/drm/amd/amdgpu/si.c         | 5 +++++
>>    drivers/gpu/drm/amd/amdgpu/soc15.c      | 8 ++++++++
>>    drivers/gpu/drm/amd/amdgpu/vi.c         | 7 +++++++
>>    7 files changed, 43 insertions(+)
>>
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>> index 4de93cef79b9..06bfb8658dec 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu.h
>> @@ -196,6 +196,7 @@ static const bool debug_evictions; /* = false */
>>    #endif
>>    
>>    extern int amdgpu_tmz;
>> +extern int amdgpu_reset_method;
>>    
>>    #ifdef CONFIG_DRM_AMDGPU_SI
>>    extern int amdgpu_si_support;
>> diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> index 94c83a9d4987..581d5fcac361 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
>> @@ -154,6 +154,7 @@ int amdgpu_mes = 0;
>>    int amdgpu_noretry = 1;
>>    int amdgpu_force_asic_type = -1;
>>    int amdgpu_tmz = 0;
>> +int amdgpu_reset_method = -1; /* auto */
>>    
>>    struct amdgpu_mgpu_info mgpu_info = {
>>    	.mutex = __MUTEX_INITIALIZER(mgpu_info.mutex),
>> @@ -793,6 +794,13 @@ module_param_named(abmlevel, amdgpu_dm_abm_level, uint, 0444);
>>    MODULE_PARM_DESC(tmz, "Enable TMZ feature (-1 = auto, 0 = off (default), 1 = on)");
>>    module_param_named(tmz, amdgpu_tmz, int, 0444);
>>    
>> +/**
>> + * DOC: reset_method (int)
>> + * GPU reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = 
>> +mode1, 3 = mode2, 4 = baco)  */ MODULE_PARM_DESC(reset_method, "GPU 
>> +reset method (-1 = auto (default), 0 = legacy, 1 = mode0, 2 = mode1,
>> +3 = mode2, 4 = baco)"); module_param_named(reset_method, 
>> +amdgpu_reset_method, int, 0444);
>> +
>>    static const struct pci_device_id pciidlist[] = {
>>    #ifdef  CONFIG_DRM_AMDGPU_SI
>>    	{0x1002, 0x6780, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_TAHITI}, diff 
>> --git a/drivers/gpu/drm/amd/amdgpu/cik.c
>> b/drivers/gpu/drm/amd/amdgpu/cik.c
>> index fe306d0f73f7..310bcf81256f 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/cik.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/cik.c
>> @@ -1326,6 +1326,13 @@ cik_asic_reset_method(struct amdgpu_device *adev)
>>    {
>>    	bool baco_reset;
>>    
>> +	if (amdgpu_reset_method == AMD_RESET_METHOD_LEGACY ||
>> +	    amdgpu_reset_method == AMD_RESET_METHOD_BACO)
>> +		return amdgpu_reset_method;
>> +	else if (amdgpu_reset_method != -1)
> When you return anyway you can also drop the else here and on other occasions as well.
>
> Apart from that the patch looks good to me.
>
> We usually try to avoid adding more module parameters, but I think this one is really justified.
>
> Thanks,
> Christian.
>
>> +		dev_warn(adev->dev, "Specified reset:%d isn't supported, using AUTO instead.\n",
>> +				  amdgpu_reset_method);
>> +
>>    	switch (adev->asic_type) {
>>    	case CHIP_BONAIRE:
>>    	case CHIP_HAWAII:
>> diff --git a/drivers/gpu/drm/amd/amdgpu/nv.c 
>> b/drivers/gpu/drm/amd/amdgpu/nv.c index 9f1240bd0310..486321bcab8f
>> 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/nv.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/nv.c
>> @@ -311,6 +311,13 @@ nv_asic_reset_method(struct amdgpu_device *adev)
>>    {
>>    	struct smu_context *smu = &adev->smu;
>>    
>> +	if (amdgpu_reset_method == AMD_RESET_METHOD_MODE1 ||
>> +	    amdgpu_reset_method == AMD_RESET_METHOD_BACO)
>> +		return amdgpu_reset_method;
>> +	else if (amdgpu_reset_method != -1)
>> +		dev_warn(adev->dev, "Specified reset method:%d isn't supported, using AUTO instead.\n",
>> +				  amdgpu_reset_method);
>> +
>>    	if (smu_baco_is_support(smu))
>>    		return AMD_RESET_METHOD_BACO;
>>    	else
>> diff --git a/drivers/gpu/drm/amd/amdgpu/si.c 
>> b/drivers/gpu/drm/amd/amdgpu/si.c index 9d7b4ccd17b8..1b449291f068
>> 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/si.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/si.c
>> @@ -1229,6 +1229,11 @@ static bool si_asic_supports_baco(struct amdgpu_device *adev)
>>    static enum amd_reset_method
>>    si_asic_reset_method(struct amdgpu_device *adev)
>>    {
>> +	if (amdgpu_reset_method != AMD_RESET_METHOD_LEGACY &&
>> +	    amdgpu_reset_method != -1)
>> +		dev_warn(adev->dev, "Specified reset method:%d isn't supported, using AUTO instead.\n",
>> +				  amdgpu_reset_method);
>> +
>>    	return AMD_RESET_METHOD_LEGACY;
>>    }
>>    
>> diff --git a/drivers/gpu/drm/amd/amdgpu/soc15.c
>> b/drivers/gpu/drm/amd/amdgpu/soc15.c
>> index 8c739b285915..40b343b25588 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/soc15.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/soc15.c
>> @@ -532,6 +532,14 @@ soc15_asic_reset_method(struct amdgpu_device *adev)
>>    	bool baco_reset = false;
>>    	struct amdgpu_ras *ras = amdgpu_ras_get_context(adev);
>>    
>> +	if (amdgpu_reset_method == AMD_RESET_METHOD_MODE1 ||
>> +	    amdgpu_reset_method == AMD_RESET_METHOD_MODE2 ||
>> +		amdgpu_reset_method == AMD_RESET_METHOD_BACO)
>> +		return amdgpu_reset_method;
>> +	else if (amdgpu_reset_method != -1)
>> +		dev_warn(adev->dev, "Specified reset method:%d isn't supported, using AUTO instead.\n",
>> +				  amdgpu_reset_method);
>> +
>>    	switch (adev->asic_type) {
>>    	case CHIP_RAVEN:
>>    	case CHIP_RENOIR:
>> diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c 
>> b/drivers/gpu/drm/amd/amdgpu/vi.c index 4e5e91888d87..e4628c17802f
>> 100644
>> --- a/drivers/gpu/drm/amd/amdgpu/vi.c
>> +++ b/drivers/gpu/drm/amd/amdgpu/vi.c
>> @@ -710,6 +710,13 @@ vi_asic_reset_method(struct amdgpu_device *adev)
>>    {
>>    	bool baco_reset;
>>    
>> +	if (amdgpu_reset_method == AMD_RESET_METHOD_LEGACY ||
>> +	    amdgpu_reset_method == AMD_RESET_METHOD_BACO)
>> +		return amdgpu_reset_method;
>> +	else if (amdgpu_reset_method != -1)
>> +		dev_warn(adev->dev, "Specified reset method:%d isn't supported, using AUTO instead.\n",
>> +				  amdgpu_reset_method);
>> +
>>    	switch (adev->asic_type) {
>>    	case CHIP_FIJI:
>>    	case CHIP_TONGA:
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://nam11.safelinks.protection.outlook.com/?url=https%3A%2F%2Flist
> s.freedesktop.org%2Fmailman%2Flistinfo%2Famd-gfx&data=02%7C01%7CWe
> nhui.Sheng%40amd.com%7C7379730b0fe24aaebf7908d827eb71f4%7C3dd8961fe488
> 4e608e11a82d994e183d%7C0%7C0%7C637303239467554138&sdata=m0Nc6gbZGR
> KLlAbTvQFJe4XJPA2gyVrK42FzG9H6OPE%3D&reserved=0


More information about the amd-gfx mailing list