[PATCH 3/3] drm/amd/powerplay: add error messages on some critical paths
Alex Deucher
alexdeucher at gmail.com
Mon Jun 8 20:12:06 UTC 2020
On Fri, Jun 5, 2020 at 7:02 AM Evan Quan <evan.quan at amd.com> wrote:
>
> Helpful for error diagnostic.
>
> Change-Id: I983ca308a2ee6ed11e16ec59ad97040d98b90512
> Signed-off-by: Evan Quan <evan.quan at amd.com>
Series is:
Reviewed-by: Alex Deucher <alexander.deucher at amd.com>
> ---
> drivers/gpu/drm/amd/powerplay/amdgpu_smu.c | 118 +++++++++++++++------
> 1 file changed, 87 insertions(+), 31 deletions(-)
>
> diff --git a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
> index 0c5e062a21a7..11538477da93 100644
> --- a/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
> +++ b/drivers/gpu/drm/amd/powerplay/amdgpu_smu.c
> @@ -457,18 +457,30 @@ int smu_dpm_set_power_gate(struct smu_context *smu, uint32_t block_type,
> switch (block_type) {
> case AMD_IP_BLOCK_TYPE_UVD:
> ret = smu_dpm_set_uvd_enable(smu, !gate);
> + if (ret)
> + dev_err(smu->adev->dev, "Failed to power %s UVD!\n",
> + gate ? "gate" : "ungate");
> break;
> case AMD_IP_BLOCK_TYPE_VCE:
> ret = smu_dpm_set_vce_enable(smu, !gate);
> break;
> case AMD_IP_BLOCK_TYPE_GFX:
> ret = smu_gfx_off_control(smu, gate);
> + if (ret)
> + dev_err(smu->adev->dev, "Failed to %s gfxoff!\n",
> + gate ? "enable" : "disable");
> break;
> case AMD_IP_BLOCK_TYPE_SDMA:
> ret = smu_powergate_sdma(smu, gate);
> + if (ret)
> + dev_err(smu->adev->dev, "Failed to power %s SDMA!\n",
> + gate ? "gate" : "ungate");
> break;
> case AMD_IP_BLOCK_TYPE_JPEG:
> ret = smu_dpm_set_jpeg_enable(smu, !gate);
> + if (ret)
> + dev_err(smu->adev->dev, "Failed to power %s JPEG!\n",
> + gate ? "gate" : "ungate");
> break;
> default:
> break;
> @@ -788,8 +800,10 @@ static int smu_late_init(void *handle)
> return 0;
>
> ret = smu_set_default_od_settings(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to setup default OD settings!\n");
> return ret;
> + }
>
> /*
> * Set initialized values (get from vbios) to dpm tables context such as
> @@ -797,20 +811,28 @@ static int smu_late_init(void *handle)
> * type of clks.
> */
> ret = smu_populate_smc_tables(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to setup default dpm clock tables!\n");
> return ret;
> + }
>
> ret = smu_init_max_sustainable_clocks(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to init max sustainable clocks!\n");
> return ret;
> + }
>
> ret = smu_populate_umd_state_clk(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to populate UMD state clocks!\n");
> return ret;
> + }
>
> ret = smu_get_power_limit(smu, &smu->default_power_limit, false, false);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to get default power limit!\n");
> return ret;
> + }
>
> smu_get_unique_id(smu);
>
> @@ -954,6 +976,8 @@ static int smu_alloc_memory_pool(struct smu_context *smu)
> &memory_pool->bo,
> &memory_pool->mc_address,
> &memory_pool->cpu_addr);
> + if (ret)
> + dev_err(adev->dev, "VRAM allocation for dramlog failed!\n");
> break;
> default:
> break;
> @@ -1147,27 +1171,35 @@ static int smu_smc_hw_setup(struct smu_context *smu)
> }
>
> ret = smu_init_display_count(smu, 0);
> - if (ret)
> + if (ret) {
> + dev_info(adev->dev, "Failed to pre-set display count as 0!\n");
> return ret;
> + }
>
> ret = smu_set_driver_table_location(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to SetDriverDramAddr!\n");
> return ret;
> + }
>
> /*
> * Set PMSTATUSLOG table bo address with SetToolsDramAddr MSG for tools.
> */
> ret = smu_set_tool_table_location(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to SetToolsDramAddr!\n");
> return ret;
> + }
>
> /*
> * Use msg SetSystemVirtualDramAddr and DramLogSetDramAddr can notify
> * pool location.
> */
> ret = smu_notify_memory_pool_location(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to SetDramLogDramAddr!\n");
> return ret;
> + }
>
> /* smu_dump_pptable(smu); */
> /*
> @@ -1175,8 +1207,10 @@ static int smu_smc_hw_setup(struct smu_context *smu)
> * SetDriverDramAddr and TransferTableDram2Smu.
> */
> ret = smu_write_pptable(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to transfer pptable to SMC!\n");
> return ret;
> + }
>
> /* issue Run*Btc msg */
> ret = smu_run_btc(smu);
> @@ -1184,12 +1218,16 @@ static int smu_smc_hw_setup(struct smu_context *smu)
> return ret;
>
> ret = smu_feature_set_allowed_mask(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to set driver allowed features mask!\n");
> return ret;
> + }
>
> ret = smu_system_features_control(smu, true);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to enable requested dpm features!\n");
> return ret;
> + }
>
> if (!smu_is_dpm_running(smu))
> dev_info(adev->dev, "dpm has been disabled\n");
> @@ -1199,8 +1237,10 @@ static int smu_smc_hw_setup(struct smu_context *smu)
> return ret;
>
> ret = smu_enable_thermal_alert(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to enable thermal alert!\n");
> return ret;
> + }
>
> ret = smu_i2c_eeprom_init(smu, &adev->pm.smu_i2c);
> if (ret)
> @@ -1284,7 +1324,7 @@ static int smu_hw_init(void *handle)
>
> ret = smu_start_smc_engine(smu);
> if (ret) {
> - dev_err(adev->dev, "SMU is not ready yet!\n");
> + dev_err(adev->dev, "SMC engine is not correctly up!\n");
> return ret;
> }
>
> @@ -1300,29 +1340,32 @@ static int smu_hw_init(void *handle)
>
> /* get boot_values from vbios to set revision, gfxclk, and etc. */
> ret = smu_get_vbios_bootup_values(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to get VBIOS boot clock values!\n");
> return ret;
> + }
>
> ret = smu_setup_pptable(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Failed to setup pptable!\n");
> return ret;
> + }
>
> ret = smu_get_driver_allowed_feature_mask(smu);
> if (ret)
> - goto failed;
> + return ret;
>
> ret = smu_smc_hw_setup(smu);
> - if (ret)
> - goto failed;
> + if (ret) {
> + dev_err(adev->dev, "Failed to setup smc hw!\n");
> + return ret;
> + }
>
> adev->pm.dpm_enabled = true;
>
> dev_info(adev->dev, "SMU is initialized successfully!\n");
>
> return 0;
> -
> -failed:
> - return ret;
> }
>
> static int smu_disable_dpms(struct smu_context *smu)
> @@ -1395,13 +1438,15 @@ static int smu_smc_hw_cleanup(struct smu_context *smu)
>
> ret = smu_disable_thermal_alert(smu);
> if (ret) {
> - dev_warn(adev->dev, "Fail to stop thermal control!\n");
> + dev_err(adev->dev, "Fail to disable thermal alert!\n");
> return ret;
> }
>
> ret = smu_disable_dpms(smu);
> - if (ret)
> + if (ret) {
> + dev_err(adev->dev, "Fail to disable dpm features!\n");
> return ret;
> + }
>
> return 0;
> }
> @@ -1493,13 +1538,15 @@ static int smu_resume(void *handle)
>
> ret = smu_start_smc_engine(smu);
> if (ret) {
> - dev_err(adev->dev, "SMU is not ready yet!\n");
> - goto failed;
> + dev_err(adev->dev, "SMC engine is not correctly up!\n");
> + return ret;
> }
>
> ret = smu_smc_hw_setup(smu);
> - if (ret)
> - goto failed;
> + if (ret) {
> + dev_err(adev->dev, "Failed to setup smc hw!\n");
> + return ret;
> + }
>
> if (smu->is_apu)
> smu_set_gfx_cgpg(&adev->smu, true);
> @@ -1511,9 +1558,6 @@ static int smu_resume(void *handle)
> dev_info(adev->dev, "SMU is resumed successfully!\n");
>
> return 0;
> -
> -failed:
> - return ret;
> }
>
> int smu_display_configuration_change(struct smu_context *smu,
> @@ -2589,6 +2633,9 @@ int smu_set_xgmi_pstate(struct smu_context *smu,
>
> mutex_unlock(&smu->mutex);
>
> + if(ret)
> + dev_err(smu->adev->dev, "Failed to set XGMI pstate!\n");
> +
> return ret;
> }
>
> @@ -2660,6 +2707,9 @@ int smu_baco_enter(struct smu_context *smu)
>
> mutex_unlock(&smu->mutex);
>
> + if (ret)
> + dev_err(smu->adev->dev, "Failed to enter BACO state!\n");
> +
> return ret;
> }
>
> @@ -2677,6 +2727,9 @@ int smu_baco_exit(struct smu_context *smu)
>
> mutex_unlock(&smu->mutex);
>
> + if (ret)
> + dev_err(smu->adev->dev, "Failed to exit BACO state!\n");
> +
> return ret;
> }
>
> @@ -2694,6 +2747,9 @@ int smu_mode2_reset(struct smu_context *smu)
>
> mutex_unlock(&smu->mutex);
>
> + if (ret)
> + dev_err(smu->adev->dev, "Mode2 reset failed!\n");
> +
> return ret;
> }
>
> --
> 2.27.0
>
> _______________________________________________
> amd-gfx mailing list
> amd-gfx at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/amd-gfx
More information about the amd-gfx
mailing list